Collect Aruba IPS logs

Supported in:

Google secops SIEM

Note: This feature is covered by Pre-GA Offerings Terms of the Google Security Operations Service Specific Terms. Pre-GA features might have limited support, and changes to pre-GA features might not be compatible with other pre-GA versions. For more information, see the Google SecOps Technical Support Service guidelines and the Google SecOps Service Specific Terms.

This document explains how to ingest Aruba IPS logs to Google Security Operations using Bindplane. The parser extracts events, notifications, rogue APs, and WIDS AP information from JSON formatted logs. It transforms the raw log data into UDM by mapping fields, handling various event types (user login/logout, network events, security events), and enriching the data with contextual information like channel, SSID, BSSID, and severity. The parser also performs timestamp normalization and error handling for malformed JSON.

Before you begin

Make sure you have the following prerequisites:

• A Google SecOps instance
• A Windows 2016 or later or Linux host with systemd
• If running behind a proxy, ensure firewall ports are open per the Bindplane agent requirements
• Privileged access to the Aruba device management console or CLI

Get Google SecOps ingestion authentication file

1. Sign in to the Google SecOps console.
2. Go to SIEM Settings > Collection Agents.
3. Download the Ingestion Authentication File. Save the file securely on the system where Bindplane will be installed.

Get Google SecOps customer ID

1. Sign in to the Google SecOps console.
2. Go to SIEM Settings > Profile.
3. Copy and save the Customer ID from the Organization Details section.

Install the Bindplane agent

Install the Bindplane agent on your Windows or Linux operating system according to the following instructions.

Windows installation

1. Open the Command Prompt or PowerShell as an administrator.

2. Run the following command:

   msiexec /i "https://github.com/observIQ/bindplane-agent/releases/latest/download/observiq-otel-collector.msi" /quiet
   

Linux installation

1. Open a terminal with root or sudo privileges.

2. Run the following command:

   sudo sh -c "$(curl -fsSlL https://github.com/observiq/bindplane-agent/releases/latest/download/install_unix.sh)" install_unix.sh
   

Additional installation resources

• For additional installation options, consult this installation guide.

Configure the Bindplane agent to ingest Syslog and send to Google SecOps

1. Access the configuration file:

   1. Locate the config.yaml file. Typically, it's in the /etc/bindplane-agent/ directory on Linux or in the installation directory on Windows.
   2. Open the file using a text editor (for example, nano, vi, or Notepad).

2. Edit the config.yaml file as follows:

   receivers:
     udplog:
       # Replace the port and IP address as required
       listen_address: "0.0.0.0:514"
   
   exporters:
     chronicle/chronicle_w_labels:
       compression: gzip
       # Adjust the path to the credentials file you downloaded in Step 1
       creds_file_path: '/path/to/ingestion-authentication-file.json'
       # Replace with your actual customer ID from Step 2
       customer_id: YOUR_CUSTOMER_ID_HERE
       endpoint: malachiteingestion-pa.googleapis.com
       # Add optional ingestion labels for better organization
       log_type: 'ARUBA_IPS'
       raw_log_field: body
       ingestion_labels:
   
   service:
     pipelines:
       logs/source0__chronicle_w_labels-0:
         receivers:
           - udplog
         exporters:
           - chronicle/chronicle_w_labels
   

   • Replace the port and IP address as required in your infrastructure.
   • Replace <YOUR_CUSTOMER_ID_HERE> with the actual customer ID.
   • Update /path/to/ingestion-authentication-file.json to the path where the authentication file was saved in the Get Google SecOps ingestion authentication file section.
   • Update the endpoint value to match your tenant's region.

Restart the Bindplane agent to apply the changes

• To restart the Bindplane agent in Linux, run the following command:

  sudo systemctl restart bindplane-agent
  

• To restart the Bindplane agent in Windows, you can either use the Services console or enter the following command:

  net stop BindPlaneAgent && net start BindPlaneAgent
  

Configure Syslog forwarding on Aruba devices

Choose the configuration method based on your Aruba device type:

Option A: Aruba Controllers (AOS-8)

This option details the steps for configuring Syslog forwarding on Aruba Controllers running AOS-8.

Using WebUI (Recommended for CEF format)

1. Sign in to the Aruba Controller web interface.
2. In the Managed Network node hierarchy, go to Configuration > System > Logging > Syslog Servers.
3. To add a logging server, click + in the Syslog Servers section.
4. Provide the following configuration details:
   • Server IP Address: Enter the Bindplane agent IP address.
   • Port: Enter 514 (or the port configured in Bindplane).
   • Protocol: Select UDP or TCP, depending on your Bindplane agent configuration.
5. Click Apply.
6. To select the types of messages you want to log, select Logging Levels.
7. Select the category or subcategory to be logged.
8. To select the severity level for the category or subcategory, select the level from the Logging Level drop-down list.
9. Select the logging format CEF or BSD-standard from the Format drop-down list.
   • The ArcSight CEF (Common Event Format) is recommended for structured logging.
10. Click Submit.
11. Click Pending Changes.
12. In the Pending Changes window, select the check-box and click Deploy changes.

Option B: Aruba Instant AP

This section outlines the procedure for setting up a Syslog server on an Aruba Instant Access Point (AP) via its WebUI or Command Line Interface (CLI).

Using WebUI

1. Sign in to the Aruba Instant web interface.
2. In the Instant main window, click the System link.
3. Click Show advanced options to display the advanced options.
4. Click the Monitoring tab.
   • The Monitoring tab details are displayed.
5. In the Syslog server field which is in the Servers section, enter the IP address of the Bindplane agent.
6. In the Syslog Facility Levels section, select the required values to configure syslog facility levels.
   • Syslog Level: Detailed log about syslog levels.
   • AP-Debug: Detailed log about the Instant AP device.
   • Network: Log about change of network, for example, when a new Instant AP is added to a network.
   • Security: Log about network security, for example, when a client connects using wrong password.
   • System: Log about configuration and system status.
   • User: Important logs about client.
   • User-Debug: Detailed log about client.
   • Wireless: Log about radio.
7. Click OK to save the configuration.

Using CLI

1. Sign in to the Aruba Instant AP CLI.

2. Enter configuration mode:

   configure terminal
   

3. Configure syslog server and level:

   syslog-server <BINDPLANE_IP_ADDRESS>
   syslog-level warnings
   

• Replace <BINDPLANE_IP_ADDRESS> with the IP address of your Bindplane agent host.
• Adjust severity level as needed.

Option C: Aruba AOS-S (Switches)

1. Sign in to the Aruba AOS-S switch CLI.

2. Enter configuration mode:

   configure
   

3. Configure syslog server:

   logging <BINDPLANE_IP_ADDRESS>
   logging severity warnings
   

   • Replace <BINDPLANE_IP_ADDRESS> with the IP address of your Bindplane agent host.
   • Adjust severity level as needed.

4. Save the configuration:

   write memory
   

Option D: Aruba Central (On-Premise)

1. Sign in to the Aruba Central web interface.
2. Go to System > System Administration > Notifications > Syslog Server.
3. Click Add or Enable.
4. Provide the following configuration details:
   • Host: Enter the Bindplane agent IP address.
   • Port: Enter 514 (or the port configured in Bindplane).
   • Protocol: Select UDP or TCP, depending on your Bindplane agent configuration.
   • Facility: Select Local7 or as required.
   • Severity: Select the minimum log level (for example, Warning or Info).
5. Click Save.

UDM Mapping Table

Log Field	UDM Mapping	Logic
notifications.created_timestamp	metadata.event_timestamp.seconds	The raw log field notifications.created_timestamp is converted to seconds and mapped. The nanoseconds are lost in the conversion.
notifications.customer_id	metadata.product_log_id	Direct mapping.
notifications.device_id	principal.resource.product_object_id	Direct mapping.
notifications.group_name	principal.group.group_display_name	Direct mapping.
notifications.id	metadata.product_log_id	Direct mapping.
notifications.timestamp	metadata.event_timestamp.seconds	The raw log field notifications.timestamp is converted to seconds and mapped.
rogue_aps.acknowledged	security_result.detection_fields.value where security_result.detection_fields.key is "acknowledged"	Converted to string and mapped.
rogue_aps.containment_status	metadata.description	Direct mapping.
rogue_aps.cust_id	metadata.product_log_id	Direct mapping.
rogue_aps.encryption	security_result.detection_fields.value where security_result.detection_fields.key is "encryption"	Direct mapping.
rogue_aps.first_det_device	principal.resource.product_object_id	Direct mapping.
rogue_aps.first_det_device_name	principal.hostname	Direct mapping.
rogue_aps.first_seen	principal.domain.first_seen_time.seconds	Parsed as a date and the seconds since epoch are mapped.
rogue_aps.group_name	principal.group.group_display_name	Direct mapping.
rogue_aps.id	principal.mac	Lowercased and mapped.
rogue_aps.labels	security_result.detection_fields.value where security_result.detection_fields.key is "labels"	Direct mapping.
rogue_aps.last_det_device	security_result.about.user.product_object_id	Direct mapping.
rogue_aps.last_det_device_name	target.hostname	Direct mapping.
rogue_aps.last_seen	principal.domain.last_seen_time.seconds	Parsed as a date and the seconds since epoch are mapped. Also used as the event timestamp if present.
rogue_aps.mac_vendor	target.administrative_domain	Direct mapping.
rogue_aps.name	target.user.userid	Direct mapping.
rogue_aps.overridden	security_result.detection_fields.value where security_result.detection_fields.key is "overridden"	Converted to string and mapped.
rogue_aps.signal	security_result.detection_fields.value where security_result.detection_fields.key is "signal"	Converted to string and mapped.
rogue_aps.ssid	security_result.detection_fields.value where security_result.detection_fields.key is "ssid"	Direct mapping.
site	principal.location.name	Direct mapping.
wids_aps_info_list.attack_type	metadata.description	Direct mapping.
wids_aps_info_list.detected_ap	principal.hostname	Direct mapping.
wids_aps_info_list.description	security_result.description	Direct mapping. Also used to extract several fields using grok.
wids_aps_info_list.event_time	metadata.event_timestamp.seconds	Converted to string and used as the event timestamp if present.
wids_aps_info_list.event_type	metadata.product_event_type	Direct mapping.
wids_aps_info_list.macaddr	principal.mac	Lowercased and mapped.
wids_aps_info_list.radio_band	security_result.detection_fields.value where security_result.detection_fields.key is "radio_band"	Direct mapping.
wids_aps_info_list.virtual_controller	target.hostname	Direct mapping. Set to true if notifications.severity is "Emergency", "Alert", or "Critical". Set to true if notifications.severity is "Emergency", "Alert", or "Critical". Determined by the events.event_type or notifications.type fields, or set to GENERIC_EVENT as a default. Several mappings are derived from the logic: STATUS_STARTUP, STATUS_SHUTDOWN, STATUS_UPDATE, USER_LOGIN, USER_LOGOUT. Always set to "ARUBA_IPS". Always set to "ARUBA_IPS". Always set to "ARUBA". Set to "DHCP" if events.event_type is "Client DHCP Acknowledged" or "Client DHCP Timeout". Set to "BOOTREPLY" if events.event_type is "Client DHCP Acknowledged" or "Client DHCP Timeout". Extracted from events.description using grok if events.event_type is "Client DHCP Acknowledged". Set to "ACK" if events.event_type is "Client DHCP Acknowledged" and events.description contains an IP address. Otherwise, set to "WIN_EXPIRED". Set to "ACCESS POINT" if events.event_type starts with "Radio", "WLAN", "AP", or is "Security". Set to "DEVICE" if events.event_type starts with "Radio", "WLAN", "AP", or is "Security". Mapped from events.client_mac for most client events, or rogue_aps.last_det_device for rogue AP events. Set to "AUTH_VIOLATION" for specific events.event_type values or if notifications.description contains "DoS Attack" or "disconnect attack". Set for specific events.event_type values. Several key-value pairs are added based on extracted fields like bssid, channel, previous_channel, ssid, previous bssid, acknowledged, overriden, encryption, signal, labels, radio_band. Mapped from wids_aps_info_list.description for wids events. Determined by notifications.severity or wids_aps_info_list.level. Set to "level: %{wids_aps_info_list.level}" for wids events. Set for specific events.event_type values. Mapped from rogue_aps.mac_vendor for rogue AP events. Mapped from rogue_aps.last_det_device_name for rogue AP events or wids_aps_info_list.virtual_controller for wids events. Extracted from events.description using grok if events.event_type is "Security". Mapped from notifications.client_mac for notification events, events.client_mac for client events, target_mac extracted from wids_aps_info_list.description for wids events, or rogue_aps.id for rogue AP events. Set to "CLIENT" for most client events. Set to "DEVICE" for most client events. Set to "ACTIVE" if events.event_type is "Security". Mapped from rogue_aps.name for rogue AP events.
events.bssid	security_result.detection_fields.value where security_result.detection_fields.key is "bssid"	Direct mapping.
events.client_mac	target.mac	Direct mapping. Also used to populate security_result.about.user.product_object_id for client events and target.ip for "Security" events.
events.description	metadata.description	Direct mapping for AP and Radio events. Used to extract several fields using grok for other event types.
events.device_mac	principal.mac	Direct mapping.
events.device_serial	principal.resource.product_object_id	Direct mapping.
events.events_details.2.channel	security_result.detection_fields.value where security_result.detection_fields.key is "channel"	Direct mapping.
events.group_name	principal.group.group_display_name	Direct mapping.
events.hostname	principal.hostname	Direct mapping.
events.timestamp	metadata.event_timestamp.seconds	Converted to string, milliseconds are removed, and then mapped. Also used as the event timestamp if present.
timestamp	metadata.event_timestamp	Used as event timestamp if other timestamp fields are not present. Set to "ACTIVE" for most client events and "Security" events. Set to "AUTHTYPE_UNSPECIFIED" if events.event_type is "Client 802.1x Radius Reject". Extracted from events.description using grok if events.event_type is "Security".

Need more help? Get answers from Community members and Google SecOps professionals.