Esta página foi traduzida pela API Cloud Translation.

Insira uma faixa numa stream em direto

Esta página descreve como criar uma ardósia e inseri-la numa stream em direto. As faixas são conteúdo que pode substituir o conteúdo principal da stream em direto sempre que quiser (por exemplo, se estiver a ter problemas técnicos na stream de entrada ou para ocultar conteúdo sensível na stream de entrada).

Configure o seu Google Cloud projeto e autenticação

Se não tiver criado um Google Cloud projeto e credenciais, consulte a secção Antes de começar.

Carregue um vídeo para o seu contentor do Cloud Storage

Na Google Cloud consola, aceda à página do navegador do Cloud Storage.
Aceda à página do navegador do armazenamento na nuvem
Clique no nome do seu contentor para o abrir.
Clique em Carregar ficheiros.
Selecione um ficheiro de vídeo para carregar a partir do seu computador local. Pode usar um vídeo de amostra de 60 segundos.

O seu vídeo está agora guardado no contentor do Cloud Storage.

Crie um recurso

Os recursos são vídeos ou imagens que podem ser usados com a API Live Stream. Um recurso é usado para criar um evento de canal de inserção de marcadores de tempo. Deve criar um recurso muito antes de planear usá-lo para uma lista de reprodução, uma vez que a API demora a processar o recurso. Se o recurso não estiver pronto após dois segundos a partir da hora de execução do evento de indicação, é apresentado um ecrã preto até o recurso estar pronto.

Para criar um recurso, use o método projects.locations.assets.create. O exemplo seguinte cria um recurso de vídeo.

REST

Antes de usar qualquer um dos dados do pedido, faça as seguintes substituições:

PROJECT_NUMBER: o número do seu Google Cloud projeto; encontra-se no campo Número do projeto na página Definições do IAM
LOCATION: a localização na qual criar o recurso; use uma das regiões suportadas
Mostrar localizações
- us-central1
- us-east1
- us-east4
- us-west1
- us-west2
- northamerica-northeast1
- southamerica-east1
- asia-east1
- asia-east2
- asia-south1
- asia-northeast1
- asia-southeast1
- australia-southeast1
- europe-north1
- europe-west1
- europe-west2
- europe-west3
- europe-west4
ASSET_ID: um identificador definido pelo utilizador para o novo recurso a criar. Este valor tem de ter entre 1 e 63 carateres, começar e terminar com [a-z0-9] e pode conter travessões (-) entre carateres. Por exemplo, my-asset.
: o URI do vídeo no seu contentor do Cloud Storage a usar, como gs://my-bucket/my-video.mp4 (consulte os formatos de multimédia suportados)ASSET_URI

Para enviar o seu pedido, expanda uma destas opções:

curl (Linux, macOS ou Cloud Shell)

Nota: O comando seguinte pressupõe que tem sessão iniciada na CLI gcloud com a sua conta de utilizador executando gcloud init ou gcloud auth login, ou usando o Cloud Shell, que inicia sessão automaticamente na CLI gcloud. Pode verificar a conta atualmente ativa executando o comando gcloud auth list.

Guarde o corpo do pedido num ficheiro denominado request.json. Execute o seguinte comando no terminal para criar ou substituir este ficheiro no diretório atual:

cat > request.json << 'EOF'
{
  "video": {
    "uri": "ASSET_URI"
  }
}
EOF

Em seguida, execute o seguinte comando para enviar o seu pedido REST:

curl -X POST \
     -H "Authorization: Bearer $(gcloud auth print-access-token)" \
     -H "Content-Type: application/json; charset=utf-8" \
     -d @request.json \
     "https://livestream.googleapis.com/v1/projects/PROJECT_NUMBER/locations/LOCATION/assets?assetId=ASSET_ID"

PowerShell (Windows)

Nota: O comando seguinte pressupõe que iniciou sessão na CLI do Google Ads com a sua conta de utilizador executando gcloud init ou gcloud auth login.gcloud Pode verificar a conta atualmente ativa executando o comando gcloud auth list.

Guarde o corpo do pedido num ficheiro denominado request.json. Execute o seguinte comando no terminal para criar ou substituir este ficheiro no diretório atual:

@'
{
  "video": {
    "uri": "ASSET_URI"
  }
}
'@  | Out-File -FilePath request.json -Encoding utf8

Em seguida, execute o seguinte comando para enviar o seu pedido REST:

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method POST `
    -Headers $headers `
    -ContentType: "application/json; charset=utf-8" `
    -InFile request.json `
    -Uri "https://livestream.googleapis.com/v1/projects/PROJECT_NUMBER/locations/LOCATION/assets?assetId=ASSET_ID" | Select-Object -Expand Content

Deve receber uma resposta JSON semelhante à seguinte:

{
  "name": "projects/PROJECT_NUMBER/locations/LOCATION/operations/OPERATION_ID",
  "metadata": {
    "@type": "type.googleapis.com/google.cloud.video.livestream.v1.OperationMetadata",
    "createTime": CREATE_TIME,
    "target": "projects/PROJECT_NUMBER/locations/LOCATION/assets/ASSET_ID",
    "verb": "create",
    "requestedCancellation": false,
    "apiVersion": "v1"
  },
  "done": false
}

Este comando cria uma operação de longa duração (LRO) que pode usar para acompanhar o progresso do seu pedido. Consulte o artigo Faça a gestão de operações de longa duração para mais informações.

C#

Para saber como instalar e usar a biblioteca cliente da API Live Stream, consulte o artigo Bibliotecas cliente da API Live Stream. Para mais informações, consulte a documentação de referência da API C# API Live Stream.

Para se autenticar na API Live Stream, configure as Credenciais padrão da aplicação. Para mais informações, consulte o artigo Configure a autenticação para um ambiente de desenvolvimento local.


using Google.Api.Gax.ResourceNames;
using Google.Cloud.Video.LiveStream.V1;
using Google.LongRunning;
using System.Threading.Tasks;

public class CreateAssetSample
{
    public async Task<Asset> CreateAssetAsync(
         string projectId, string locationId, string assetId, string assetUri)
    {
        // Create the client.
        LivestreamServiceClient client = LivestreamServiceClient.Create();

        CreateAssetRequest request = new CreateAssetRequest
        {
            ParentAsLocationName = LocationName.FromProjectLocation(projectId, locationId),
            AssetId = assetId,
            Asset = new Asset
            {
                Video = new Asset.Types.VideoAsset
                {
                    Uri = assetUri
                }
            }
        };

        // Make the request.
        Operation<Asset, OperationMetadata> response = await client.CreateAssetAsync(request);

        // Poll until the returned long-running operation is complete.
        Operation<Asset, OperationMetadata> completedResponse = await response.PollUntilCompletedAsync();

        // Retrieve the operation result.
        return completedResponse.Result;
    }
}

Go

import (
	"context"
	"fmt"
	"io"

	livestream "cloud.google.com/go/video/livestream/apiv1"
	"cloud.google.com/go/video/livestream/apiv1/livestreampb"
)

// createAsset creates an asset. This asset references a video file
// in Cloud Storage.
func createAsset(w io.Writer, projectID, location, assetID, assetURI string) error {
	// projectID := "my-project-id"
	// location := "us-central1"
	// assetID := "my-asset"
	// assetURI := "gs://my-bucket/my-video.mp4"
	ctx := context.Background()
	client, err := livestream.NewClient(ctx)
	if err != nil {
		return fmt.Errorf("NewClient: %w", err)
	}
	defer client.Close()

	req := &livestreampb.CreateAssetRequest{
		Parent:  fmt.Sprintf("projects/%s/locations/%s", projectID, location),
		AssetId: assetID,
		Asset: &livestreampb.Asset{
			Resource: &livestreampb.Asset_Video{
				Video: &livestreampb.Asset_VideoAsset{
					Uri: assetURI,
				},
			},
		},
	}
	// Creates the asset.
	op, err := client.CreateAsset(ctx, req)
	if err != nil {
		return fmt.Errorf("CreateAsset: %w", err)
	}
	response, err := op.Wait(ctx)
	if err != nil {
		return fmt.Errorf("Wait: %w", err)
	}

	fmt.Fprintf(w, "Asset: %v", response.Name)
	return nil
}

Java


import com.google.cloud.video.livestream.v1.Asset;
import com.google.cloud.video.livestream.v1.Asset.VideoAsset;
import com.google.cloud.video.livestream.v1.CreateAssetRequest;
import com.google.cloud.video.livestream.v1.LivestreamServiceClient;
import com.google.cloud.video.livestream.v1.LocationName;
import java.io.IOException;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class CreateAsset {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "my-project-id";
    String location = "us-central1";
    String assetId = "my-asset-id";
    String assetUri = "gs://my-bucket/my-video.mp4";

    createAsset(projectId, location, assetId, assetUri);
  }

  public static void createAsset(String projectId, String location, String assetId, String assetUri)
      throws InterruptedException, ExecutionException, TimeoutException, IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    LivestreamServiceClient livestreamServiceClient = LivestreamServiceClient.create();
    var createAssetRequest =
        CreateAssetRequest.newBuilder()
            .setParent(LocationName.of(projectId, location).toString())
            .setAssetId(assetId)
            .setAsset(
                Asset.newBuilder()
                    .setVideo(
                        VideoAsset.newBuilder()
                            .setUri(assetUri)
                            .build())
                    .build())
            .build();
    // First API call in a project can take up to 15 minutes.
    Asset result =
        livestreamServiceClient.createAssetAsync(createAssetRequest).get(15, TimeUnit.MINUTES);
    System.out.println("Asset: " + result.getName());
    livestreamServiceClient.close();
  }
}

Node.js

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// projectId = 'my-project-id';
// location = 'us-central1';
// assetId = 'my-asset';
// assetUri = 'gs://my-bucket/my-video.mp4';

// Imports the Livestream library
const {LivestreamServiceClient} = require('@google-cloud/livestream').v1;

// Instantiates a client
const livestreamServiceClient = new LivestreamServiceClient();

async function createAsset() {
  // Construct request
  const request = {
    parent: livestreamServiceClient.locationPath(projectId, location),
    assetId: assetId,
    asset: {
      video: {
        uri: assetUri,
      },
    },
  };

  // Run request
  const [operation] = await livestreamServiceClient.createAsset(request);
  const response = await operation.promise();
  const [asset] = response;
  console.log(`Asset: ${asset.name}`);
}

createAsset();

PHP

use Google\Cloud\Video\LiveStream\V1\Asset;
use Google\Cloud\Video\LiveStream\V1\Client\LivestreamServiceClient;
use Google\Cloud\Video\LiveStream\V1\CreateAssetRequest;

/**
 * Creates an asset. You can use an asset to create a slate.
 *
 * @param string  $callingProjectId   The project ID to run the API call under
 * @param string  $location           The location of the asset
 * @param string  $assetId            The ID of the asset to be created
 * @param string  $assetUri           The Cloud Storage URI of the asset
 */
function create_asset(
    string $callingProjectId,
    string $location,
    string $assetId,
    string $assetUri
): void {
    // Instantiate a client.
    $livestreamClient = new LivestreamServiceClient();

    $parent = $livestreamClient->locationName($callingProjectId, $location);
    $asset = (new Asset())
        ->setVideo(
            (new Asset\VideoAsset())
                ->setUri($assetUri));

    // Run the asset creation request. The response is a long-running operation ID.
    $request = (new CreateAssetRequest())
        ->setParent($parent)
        ->setAsset($asset)
        ->setAssetId($assetId);
    $operationResponse = $livestreamClient->createAsset($request);
    $operationResponse->pollUntilComplete();
    if ($operationResponse->operationSucceeded()) {
        $result = $operationResponse->getResult();
        // Print results
        printf('Asset: %s' . PHP_EOL, $result->getName());
    } else {
        $error = $operationResponse->getError();
        // handleError($error)
    }
}

Python


import argparse

from google.cloud.video import live_stream_v1
from google.cloud.video.live_stream_v1.services.livestream_service import (
    LivestreamServiceClient,
)


def create_asset(
    project_id: str, location: str, asset_id: str, asset_uri: str
) -> live_stream_v1.types.Asset:
    """Creates an asset.
    Args:
        project_id: The GCP project ID.
        location: The location in which to create the asset.
        asset_id: The user-defined asset ID.
        asset_uri: The asset URI (e.g., 'gs://my-bucket/my-video.mp4')."""

    client = LivestreamServiceClient()

    parent = f"projects/{project_id}/locations/{location}"

    asset = live_stream_v1.types.Asset(
        video=live_stream_v1.types.Asset.VideoAsset(
            uri=asset_uri,
        )
    )
    operation = client.create_asset(parent=parent, asset=asset, asset_id=asset_id)
    response = operation.result(600)
    print(f"Asset: {response.name}")

    return response

Ruby

require "google/cloud/video/live_stream"

##
# Create an asset
#
# @param project_id [String] Your Google Cloud project (e.g. "my-project")
# @param location [String] The location (e.g. "us-central1")
# @param asset_id [String] Your asset name (e.g. "my-asset")
# @param asset_uri [String] Your asset URI (e.g. "gs://my-bucket/my-video.mp4")
#
def create_asset project_id:, location:, asset_id:, asset_uri:
  # Create a Live Stream client.
  client = Google::Cloud::Video::LiveStream.livestream_service

  # Build the resource name of the parent.
  parent = client.location_path project: project_id, location: location

  # Set the asset fields.
  new_asset = {
    video: {
      uri: asset_uri
    }
  }

  operation = client.create_asset parent: parent, asset: new_asset, asset_id: asset_id

  # The returned object is of type Gapic::Operation. You can use this
  # object to check the status of an operation, cancel it, or wait
  # for results. Here is how to block until completion:
  operation.wait_until_done!

  # Print the asset name.
  puts "Asset: #{operation.response.name}"
end

Crie um ponto final de entrada

Para criar um ponto final de entrada, use o método projects.locations.inputs.create.

REST

Antes de usar qualquer um dos dados do pedido, faça as seguintes substituições:

PROJECT_NUMBER: o número do seu Google Cloud projeto; encontra-se no campo Número do projeto na página Definições do IAM
LOCATION: a localização na qual criar o ponto final de entrada; use uma das regiões suportadas
Mostrar localizações
- us-central1
- us-east1
- us-east4
- us-west1
- us-west2
- northamerica-northeast1
- southamerica-east1
- asia-east1
- asia-east2
- asia-south1
- asia-northeast1
- asia-southeast1
- australia-southeast1
- europe-north1
- europe-west1
- europe-west2
- europe-west3
- europe-west4
INPUT_ID: um identificador definido pelo utilizador para o novo ponto final de entrada a criar (para o qual envia a sua stream de entrada). Este valor tem de ter entre 1 e 63 carateres, começar e terminar com [a-z0-9] e pode conter travessões (-) entre carateres. Por exemplo, my-input.

Para enviar o seu pedido, expanda uma destas opções:

curl (Linux, macOS ou Cloud Shell)

Guarde o corpo do pedido num ficheiro denominado request.json. Execute o seguinte comando no terminal para criar ou substituir este ficheiro no diretório atual:

cat > request.json << 'EOF'
{
  "type": "RTMP_PUSH"
}
EOF

Em seguida, execute o seguinte comando para enviar o seu pedido REST:

curl -X POST \
     -H "Authorization: Bearer $(gcloud auth print-access-token)" \
     -H "Content-Type: application/json; charset=utf-8" \
     -d @request.json \
     "https://livestream.googleapis.com/v1/projects/PROJECT_NUMBER/locations/LOCATION/inputs?inputId=INPUT_ID"

PowerShell (Windows)

Guarde o corpo do pedido num ficheiro denominado request.json. Execute o seguinte comando no terminal para criar ou substituir este ficheiro no diretório atual:

@'
{
  "type": "RTMP_PUSH"
}
'@  | Out-File -FilePath request.json -Encoding utf8

Em seguida, execute o seguinte comando para enviar o seu pedido REST:

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method POST `
    -Headers $headers `
    -ContentType: "application/json; charset=utf-8" `
    -InFile request.json `
    -Uri "https://livestream.googleapis.com/v1/projects/PROJECT_NUMBER/locations/LOCATION/inputs?inputId=INPUT_ID" | Select-Object -Expand Content

Deve receber uma resposta JSON semelhante à seguinte:

{
  "name": "projects/PROJECT_NUMBER/locations/LOCATION/operations/OPERATION_ID",
  "metadata": {
    "@type": "type.googleapis.com/google.cloud.video.livestream.v1.OperationMetadata",
    "createTime": CREATE_TIME,
    "target": "projects/PROJECT_NUMBER/locations/LOCATION/inputs/INPUT_ID",
    "verb": "create",
    "requestedCancellation": false,
    "apiVersion": "v1"
  },
  "done": false
}

C#


using Google.Api.Gax.ResourceNames;
using Google.Cloud.Video.LiveStream.V1;
using Google.LongRunning;
using System.Threading.Tasks;

public class CreateInputSample
{
    public async Task<Input> CreateInputAsync(
         string projectId, string locationId, string inputId)
    {
        // Create the client.
        LivestreamServiceClient client = LivestreamServiceClient.Create();

        CreateInputRequest request = new CreateInputRequest
        {
            ParentAsLocationName = LocationName.FromProjectLocation(projectId, locationId),
            InputId = inputId,
            Input = new Input
            {
                Type = Input.Types.Type.RtmpPush
            }
        };

        // Make the request.
        Operation<Input, OperationMetadata> response = await client.CreateInputAsync(request);

        // Poll until the returned long-running operation is complete.
        Operation<Input, OperationMetadata> completedResponse = await response.PollUntilCompletedAsync();

        // Retrieve the operation result.
        return completedResponse.Result;
    }
}

Go

import (
	"context"
	"fmt"
	"io"

	livestream "cloud.google.com/go/video/livestream/apiv1"
	"cloud.google.com/go/video/livestream/apiv1/livestreampb"
)

// createInput creates an input endpoint. You send an input video stream to this
// endpoint.
func createInput(w io.Writer, projectID, location, inputID string) error {
	// projectID := "my-project-id"
	// location := "us-central1"
	// inputID := "my-input"
	ctx := context.Background()
	client, err := livestream.NewClient(ctx)
	if err != nil {
		return fmt.Errorf("NewClient: %w", err)
	}
	defer client.Close()

	req := &livestreampb.CreateInputRequest{
		Parent:  fmt.Sprintf("projects/%s/locations/%s", projectID, location),
		InputId: inputID,
		Input: &livestreampb.Input{
			Type: livestreampb.Input_RTMP_PUSH,
		},
	}
	// Creates the input.
	op, err := client.CreateInput(ctx, req)
	if err != nil {
		return fmt.Errorf("CreateInput: %w", err)
	}
	response, err := op.Wait(ctx)
	if err != nil {
		return fmt.Errorf("Wait: %w", err)
	}

	fmt.Fprintf(w, "Input: %v", response.Name)
	return nil
}

Java


import com.google.cloud.video.livestream.v1.CreateInputRequest;
import com.google.cloud.video.livestream.v1.Input;
import com.google.cloud.video.livestream.v1.LivestreamServiceClient;
import com.google.cloud.video.livestream.v1.LocationName;
import java.io.IOException;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class CreateInput {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "my-project-id";
    String location = "us-central1";
    String inputId = "my-input-id";

    createInput(projectId, location, inputId);
  }

  public static void createInput(String projectId, String location, String inputId)
      throws InterruptedException, ExecutionException, TimeoutException, IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    LivestreamServiceClient livestreamServiceClient = LivestreamServiceClient.create();
    var createInputRequest =
        CreateInputRequest.newBuilder()
            .setParent(LocationName.of(projectId, location).toString())
            .setInputId(inputId)
            .setInput(Input.newBuilder().setType(Input.Type.RTMP_PUSH).build())
            .build();
    // First API call in a project can take up to 15 minutes.
    Input result =
        livestreamServiceClient.createInputAsync(createInputRequest).get(15, TimeUnit.MINUTES);
    System.out.println("Input: " + result.getName());
    livestreamServiceClient.close();
  }
}

Node.js

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// projectId = 'my-project-id';
// location = 'us-central1';
// inputId = 'my-input';

// Imports the Livestream library
const {LivestreamServiceClient} = require('@google-cloud/livestream').v1;

// Instantiates a client
const livestreamServiceClient = new LivestreamServiceClient();

async function createInput() {
  // Construct request
  const request = {
    parent: livestreamServiceClient.locationPath(projectId, location),
    inputId: inputId,
    input: {
      type: 'RTMP_PUSH',
    },
  };

  // Run request
  const [operation] = await livestreamServiceClient.createInput(request);
  const response = await operation.promise();
  const [input] = response;
  console.log(`Input: ${input.name}`);
}

createInput();

PHP

use Google\Cloud\Video\LiveStream\V1\Input;
use Google\Cloud\Video\LiveStream\V1\Client\LivestreamServiceClient;
use Google\Cloud\Video\LiveStream\V1\CreateInputRequest;

/**
 * Creates an input. You send an input video stream to this endpoint.
 *
 * @param string  $callingProjectId   The project ID to run the API call under
 * @param string  $location           The location of the input
 * @param string  $inputId            The ID of the input to be created
 */
function create_input(
    string $callingProjectId,
    string $location,
    string $inputId
): void {
    // Instantiate a client.
    $livestreamClient = new LivestreamServiceClient();

    $parent = $livestreamClient->locationName($callingProjectId, $location);
    $input = (new Input())
        ->setType(Input\Type::RTMP_PUSH);

    // Run the input creation request. The response is a long-running operation ID.
    $request = (new CreateInputRequest())
        ->setParent($parent)
        ->setInput($input)
        ->setInputId($inputId);
    $operationResponse = $livestreamClient->createInput($request);
    $operationResponse->pollUntilComplete();
    if ($operationResponse->operationSucceeded()) {
        $result = $operationResponse->getResult();
        // Print results
        printf('Input: %s' . PHP_EOL, $result->getName());
    } else {
        $error = $operationResponse->getError();
        // handleError($error)
    }
}

Python


import argparse

from google.cloud.video import live_stream_v1
from google.cloud.video.live_stream_v1.services.livestream_service import (
    LivestreamServiceClient,
)


def create_input(
    project_id: str, location: str, input_id: str
) -> live_stream_v1.types.Input:
    """Creates an input.
    Args:
        project_id: The GCP project ID.
        location: The location in which to create the input.
        input_id: The user-defined input ID."""

    client = LivestreamServiceClient()

    parent = f"projects/{project_id}/locations/{location}"

    input = live_stream_v1.types.Input(
        type_="RTMP_PUSH",
    )
    operation = client.create_input(parent=parent, input=input, input_id=input_id)
    response = operation.result(900)
    print(f"Input: {response.name}")

    return response

Ruby

require "google/cloud/video/live_stream"

##
# Create an input endpoint
#
# @param project_id [String] Your Google Cloud project (e.g. "my-project")
# @param location [String] The location (e.g. "us-central1")
# @param input_id [String] Your input name (e.g. "my-input")
#
def create_input project_id:, location:, input_id:
  # Create a Live Stream client.
  client = Google::Cloud::Video::LiveStream.livestream_service

  # Build the resource name of the parent.
  parent = client.location_path project: project_id, location: location

  # Set the input fields.
  new_input = {
    type: Google::Cloud::Video::LiveStream::V1::Input::Type::RTMP_PUSH
  }

  operation = client.create_input parent: parent, input: new_input, input_id: input_id

  # The returned object is of type Gapic::Operation. You can use this
  # object to check the status of an operation, cancel it, or wait
  # for results. Here is how to block until completion:
  operation.wait_until_done!

  # Print the input name.
  puts "Input: #{operation.response.name}"
end

Obtenha detalhes do ponto final de entrada

Para obter os detalhes do ponto final de entrada, use o método projects.locations.inputs.get.

REST

Antes de usar qualquer um dos dados do pedido, faça as seguintes substituições:

PROJECT_NUMBER: o número do seu Google Cloud projeto; encontra-se no campo Número do projeto na página Definições do IAM
LOCATION: a localização onde o seu ponto final de entrada está localizado; use uma das regiões suportadas
Mostrar localizações
- us-central1
- us-east1
- us-east4
- us-west1
- us-west2
- northamerica-northeast1
- southamerica-east1
- asia-east1
- asia-east2
- asia-south1
- asia-northeast1
- asia-southeast1
- australia-southeast1
- europe-north1
- europe-west1
- europe-west2
- europe-west3
- europe-west4
INPUT_ID: o identificador definido pelo utilizador para o ponto final de entrada

Para enviar o seu pedido, expanda uma destas opções:

curl (Linux, macOS ou Cloud Shell)

Execute o seguinte comando:

curl -X GET \
     -H "Authorization: Bearer $(gcloud auth print-access-token)" \
     "https://livestream.googleapis.com/v1/projects/PROJECT_NUMBER/locations/LOCATION/inputs/INPUT_ID"

PowerShell (Windows)

Execute o seguinte comando:

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method GET `
    -Headers $headers `
    -Uri "https://livestream.googleapis.com/v1/projects/PROJECT_NUMBER/locations/LOCATION/inputs/INPUT_ID" | Select-Object -Expand Content

Deve receber uma resposta JSON semelhante à seguinte:

{
  "name": "projects/PROJECT_NUMBER/locations/LOCATION/inputs/INPUT_ID",
  "createTime": CREATE_TIME,
  "updateTime": UPDATE_TIME,
  "type": "RTMP_PUSH",
  "uri":  "INPUT_STREAM_URI", # For example, "rtmp://1.2.3.4/live/b8ebdd94-c8d9-4d88-a16e-b963c43a953b",
  "tier": "HD"
}

C#


using Google.Cloud.Video.LiveStream.V1;

public class GetInputSample
{
    public Input GetInput(
         string projectId, string locationId, string inputId)
    {
        // Create the client.
        LivestreamServiceClient client = LivestreamServiceClient.Create();

        GetInputRequest request = new GetInputRequest
        {
            InputName = InputName.FromProjectLocationInput(projectId, locationId, inputId)
        };

        // Make the request.
        Input response = client.GetInput(request);
        return response;
    }
}

Go

import (
	"context"
	"fmt"
	"io"

	livestream "cloud.google.com/go/video/livestream/apiv1"
	"cloud.google.com/go/video/livestream/apiv1/livestreampb"
)

// getInput gets a previously-created input endpoint.
func getInput(w io.Writer, projectID, location, inputID string) error {
	// projectID := "my-project-id"
	// location := "us-central1"
	// inputID := "my-input-id"
	ctx := context.Background()
	client, err := livestream.NewClient(ctx)
	if err != nil {
		return fmt.Errorf("NewClient: %w", err)
	}
	defer client.Close()

	req := &livestreampb.GetInputRequest{
		Name: fmt.Sprintf("projects/%s/locations/%s/inputs/%s", projectID, location, inputID),
	}

	response, err := client.GetInput(ctx, req)
	if err != nil {
		return fmt.Errorf("GetInput: %w", err)
	}

	fmt.Fprintf(w, "Input: %v", response.Name)
	return nil
}

Java


import com.google.cloud.video.livestream.v1.Input;
import com.google.cloud.video.livestream.v1.InputName;
import com.google.cloud.video.livestream.v1.LivestreamServiceClient;
import java.io.IOException;

public class GetInput {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "my-project-id";
    String location = "us-central1";
    String inputId = "my-input-id";

    getInput(projectId, location, inputId);
  }

  public static void getInput(String projectId, String location, String inputId)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. In this example, try-with-resources is used
    // which automatically calls close() on the client to clean up resources.
    try (LivestreamServiceClient livestreamServiceClient = LivestreamServiceClient.create()) {
      InputName name = InputName.of(projectId, location, inputId);
      Input response = livestreamServiceClient.getInput(name);
      System.out.println("Input: " + response.getName());
    }
  }
}

Node.js

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// projectId = 'my-project-id';
// location = 'us-central1';
// inputId = 'my-input';

// Imports the Livestream library
const {LivestreamServiceClient} = require('@google-cloud/livestream').v1;

// Instantiates a client
const livestreamServiceClient = new LivestreamServiceClient();

async function getInput() {
  // Construct request
  const request = {
    name: livestreamServiceClient.inputPath(projectId, location, inputId),
  };
  const [input] = await livestreamServiceClient.getInput(request);
  console.log(`Input: ${input.name}`);
}

getInput();

PHP

use Google\Cloud\Video\LiveStream\V1\Client\LivestreamServiceClient;
use Google\Cloud\Video\LiveStream\V1\GetInputRequest;

/**
 * Gets an input.
 *
 * @param string  $callingProjectId   The project ID to run the API call under
 * @param string  $location           The location of the input
 * @param string  $inputId            The ID of the input
 */
function get_input(
    string $callingProjectId,
    string $location,
    string $inputId
): void {
    // Instantiate a client.
    $livestreamClient = new LivestreamServiceClient();
    $formattedName = $livestreamClient->inputName($callingProjectId, $location, $inputId);

    // Get the input.
    $request = (new GetInputRequest())
        ->setName($formattedName);
    $response = $livestreamClient->getInput($request);
    // Print results
    printf('Input: %s' . PHP_EOL, $response->getName());
}

Python


import argparse

from google.cloud.video import live_stream_v1
from google.cloud.video.live_stream_v1.services.livestream_service import (
    LivestreamServiceClient,
)


def get_input(
    project_id: str, location: str, input_id: str
) -> live_stream_v1.types.Input:
    """Gets an input.
    Args:
        project_id: The GCP project ID.
        location: The location of the input.
        input_id: The user-defined input ID."""

    client = LivestreamServiceClient()

    name = f"projects/{project_id}/locations/{location}/inputs/{input_id}"
    response = client.get_input(name=name)
    print(f"Input: {response.name}")

    return response

Ruby

require "google/cloud/video/live_stream"

##
# Get an input endpoint
#
# @param project_id [String] Your Google Cloud project (e.g. "my-project")
# @param location [String] The location (e.g. "us-central1")
# @param input_id [String] Your input name (e.g. "my-input")
#
def get_input project_id:, location:, input_id:
  # Create a Live Stream client.
  client = Google::Cloud::Video::LiveStream.livestream_service

  # Build the resource name of the input.
  name = client.input_path project: project_id, location: location, input: input_id

  # Get the input.
  input = client.get_input name: name

  # Print the input name.
  puts "Input: #{input.name}"
end

Encontre o campo uri e copie o valor INPUT_STREAM_URI devolvido para usar mais tarde na secção Envie o fluxo de entrada.

Crie um canal

Para criar um canal, use o método projects.locations.channels.create. Os exemplos seguintes criam um canal que gera uma stream em direto de HLS. A stream em direto consiste numa única renderização de alta definição (1280 x 720).

REST

Antes de usar qualquer um dos dados do pedido, faça as seguintes substituições:

PROJECT_NUMBER: o número do seu Google Cloud projeto; encontra-se no campo Número do projeto na página Definições do IAM
LOCATION: a localização na qual criar o canal; use uma das regiões suportadas
Mostrar localizações
- us-central1
- us-east1
- us-east4
- us-west1
- us-west2
- northamerica-northeast1
- southamerica-east1
- asia-east1
- asia-east2
- asia-south1
- asia-northeast1
- asia-southeast1
- australia-southeast1
- europe-north1
- europe-west1
- europe-west2
- europe-west3
- europe-west4
CHANNEL_ID: um identificador definido pelo utilizador para o canal a criar; este valor tem de ter entre 1 e 63 carateres, começar e terminar com [a-z0-9] e pode conter traços (-) entre carateres
INPUT_ID: o identificador definido pelo utilizador para o ponto final de entrada
BUCKET_NAME: o nome do contentor do Cloud Storage que criou para conter o manifesto da stream em direto e os ficheiros de segmentos

Para enviar o seu pedido, expanda uma destas opções:

curl (Linux, macOS ou Cloud Shell)

Guarde o corpo do pedido num ficheiro denominado request.json. Execute o seguinte comando no terminal para criar ou substituir este ficheiro no diretório atual:

cat > request.json << 'EOF'
{
  "inputAttachments": [
    {
      "key": "my-input",
      "input": "projects/PROJECT_NUMBER/locations/LOCATION/inputs/INPUT_ID"
    }
  ],
  "output": {
    "uri": "gs://BUCKET_NAME"
  },
  "elementaryStreams": [
    {
      "key": "es_video",
      "videoStream": {
        "h264": {
          "profile": "high",
          "widthPixels": 1280,
          "heightPixels": 720,
          "bitrateBps": 3000000,
          "frameRate": 30
        }
      }
    },
    {
      "key": "es_audio",
      "audioStream": {
        "codec": "aac",
        "channelCount": 2,
        "bitrateBps": 160000
      }
    }
  ],
  "muxStreams": [
    {
      "key": "mux_video_ts",
      "container": "ts",
      "elementaryStreams": ["es_video", "es_audio"],
      "segmentSettings": { "segmentDuration": "2s" }
    }
  ],
  "manifests": [
    {
      "key": "manifest_hls",
      "fileName": "main.m3u8",
      "type": "HLS",
      "muxStreams": [
        "mux_video_ts"
      ],
      "maxSegmentCount": 5
    }
  ]
}
EOF

Em seguida, execute o seguinte comando para enviar o seu pedido REST:

curl -X POST \
     -H "Authorization: Bearer $(gcloud auth print-access-token)" \
     -H "Content-Type: application/json; charset=utf-8" \
     -d @request.json \
     "https://livestream.googleapis.com/v1/projects/PROJECT_NUMBER/locations/LOCATION/channels?channelId=CHANNEL_ID"

PowerShell (Windows)

Guarde o corpo do pedido num ficheiro denominado request.json. Execute o seguinte comando no terminal para criar ou substituir este ficheiro no diretório atual:

@'
{
  "inputAttachments": [
    {
      "key": "my-input",
      "input": "projects/PROJECT_NUMBER/locations/LOCATION/inputs/INPUT_ID"
    }
  ],
  "output": {
    "uri": "gs://BUCKET_NAME"
  },
  "elementaryStreams": [
    {
      "key": "es_video",
      "videoStream": {
        "h264": {
          "profile": "high",
          "widthPixels": 1280,
          "heightPixels": 720,
          "bitrateBps": 3000000,
          "frameRate": 30
        }
      }
    },
    {
      "key": "es_audio",
      "audioStream": {
        "codec": "aac",
        "channelCount": 2,
        "bitrateBps": 160000
      }
    }
  ],
  "muxStreams": [
    {
      "key": "mux_video_ts",
      "container": "ts",
      "elementaryStreams": ["es_video", "es_audio"],
      "segmentSettings": { "segmentDuration": "2s" }
    }
  ],
  "manifests": [
    {
      "key": "manifest_hls",
      "fileName": "main.m3u8",
      "type": "HLS",
      "muxStreams": [
        "mux_video_ts"
      ],
      "maxSegmentCount": 5
    }
  ]
}
'@  | Out-File -FilePath request.json -Encoding utf8

Em seguida, execute o seguinte comando para enviar o seu pedido REST:

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method POST `
    -Headers $headers `
    -ContentType: "application/json; charset=utf-8" `
    -InFile request.json `
    -Uri "https://livestream.googleapis.com/v1/projects/PROJECT_NUMBER/locations/LOCATION/channels?channelId=CHANNEL_ID" | Select-Object -Expand Content

Deve receber uma resposta JSON semelhante à seguinte:

{
  "name": "projects/PROJECT_NUMBER/locations/LOCATION/operations/OPERATION_ID",
  "metadata": {
    "@type": "type.googleapis.com/google.cloud.video.livestream.v1.OperationMetadata",
    "createTime": CREATE_TIME,
    "target": "projects/PROJECT_NUMBER/locations/LOCATION/channels/CHANNEL_ID",
    "verb": "create",
    "requestedCancellation": false,
    "apiVersion": "v1"
  },
  "done": false
}

C#


using Google.Api.Gax.ResourceNames;
using Google.Cloud.Video.LiveStream.V1;
using Google.LongRunning;
using System.Threading.Tasks;

public class CreateChannelSample
{
    public async Task<Channel> CreateChannelAsync(
         string projectId, string locationId, string channelId, string inputId, string outputUri)
    {
        // Create the client.
        LivestreamServiceClient client = LivestreamServiceClient.Create();

        InputAttachment inputAttachment = new InputAttachment
        {
            Key = "my-input",
            InputAsInputName = InputName.FromProjectLocationInput(projectId, locationId, inputId)
        };

        VideoStream videoStream = new VideoStream
        {
            H264 = new VideoStream.Types.H264CodecSettings
            {
                Profile = "high",
                BitrateBps = 3000000,
                FrameRate = 30,
                HeightPixels = 720,
                WidthPixels = 1280
            }
        };

        ElementaryStream elementaryStreamVideo = new ElementaryStream
        {
            Key = "es_video",
            VideoStream = videoStream
        };

        AudioStream audioStream = new AudioStream
        {
            Codec = "aac",
            ChannelCount = 2,
            BitrateBps = 160000
        };

        ElementaryStream elementaryStreamAudio = new ElementaryStream
        {
            Key = "es_audio",
            AudioStream = audioStream
        };

        MuxStream muxVideo = new MuxStream
        {
            Key = "mux_video",
            ElementaryStreams = { "es_video" },
            SegmentSettings = new SegmentSettings
            {
                SegmentDuration = new Google.Protobuf.WellKnownTypes.Duration
                {
                    Seconds = 2
                }
            }
        };

        MuxStream muxAudio = new MuxStream
        {
            Key = "mux_audio",
            ElementaryStreams = { "es_audio" },
            SegmentSettings = new SegmentSettings
            {
                SegmentDuration = new Google.Protobuf.WellKnownTypes.Duration
                {
                    Seconds = 2
                }
            }
        };

        CreateChannelRequest request = new CreateChannelRequest
        {
            ParentAsLocationName = LocationName.FromProjectLocation(projectId, locationId),
            ChannelId = channelId,
            Channel = new Channel
            {
                InputAttachments = { inputAttachment },
                Output = new Channel.Types.Output
                {
                    Uri = outputUri
                },
                ElementaryStreams = { elementaryStreamVideo, elementaryStreamAudio },
                MuxStreams = { muxVideo, muxAudio },
                Manifests = {
                    new Manifest {
                        FileName = "manifest.m3u8",
                        Type = Manifest.Types.ManifestType.Hls,
                        MuxStreams = { "mux_video", "mux_audio" },
                        MaxSegmentCount = 5
                    }
                }
            }
        };

        // Make the request.
        Operation<Channel, OperationMetadata> response = await client.CreateChannelAsync(request);

        // Poll until the returned long-running operation is complete.
        Operation<Channel, OperationMetadata> completedResponse = await response.PollUntilCompletedAsync();

        // Retrieve the operation result.
        return completedResponse.Result;
    }
}

Go

import (
	"context"
	"fmt"
	"io"

	"github.com/golang/protobuf/ptypes/duration"

	livestream "cloud.google.com/go/video/livestream/apiv1"
	"cloud.google.com/go/video/livestream/apiv1/livestreampb"
)

// createChannel creates a channel.
func createChannel(w io.Writer, projectID, location, channelID, inputID, outputURI string) error {
	// projectID := "my-project-id"
	// location := "us-central1"
	// channelID := "my-channel"
	// inputID := "my-input"
	// outputURI := "gs://my-bucket/my-output-folder/"
	ctx := context.Background()
	client, err := livestream.NewClient(ctx)
	if err != nil {
		return fmt.Errorf("NewClient: %w", err)
	}
	defer client.Close()

	req := &livestreampb.CreateChannelRequest{
		Parent:    fmt.Sprintf("projects/%s/locations/%s", projectID, location),
		ChannelId: channelID,
		Channel: &livestreampb.Channel{
			InputAttachments: []*livestreampb.InputAttachment{
				{
					Key:   "my-input",
					Input: fmt.Sprintf("projects/%s/locations/%s/inputs/%s", projectID, location, inputID),
				},
			},
			Output: &livestreampb.Channel_Output{
				Uri: outputURI,
			},
			ElementaryStreams: []*livestreampb.ElementaryStream{
				{
					Key: "es_video",
					ElementaryStream: &livestreampb.ElementaryStream_VideoStream{
						VideoStream: &livestreampb.VideoStream{
							CodecSettings: &livestreampb.VideoStream_H264{
								H264: &livestreampb.VideoStream_H264CodecSettings{
									Profile:      "high",
									BitrateBps:   3000000,
									FrameRate:    30,
									HeightPixels: 720,
									WidthPixels:  1280,
								},
							},
						},
					},
				},
				{
					Key: "es_audio",
					ElementaryStream: &livestreampb.ElementaryStream_AudioStream{
						AudioStream: &livestreampb.AudioStream{
							Codec:        "aac",
							ChannelCount: 2,
							BitrateBps:   160000,
						},
					},
				},
			},
			MuxStreams: []*livestreampb.MuxStream{
				{
					Key:               "mux_video",
					ElementaryStreams: []string{"es_video"},
					SegmentSettings: &livestreampb.SegmentSettings{
						SegmentDuration: &duration.Duration{
							Seconds: 2,
						},
					},
				},
				{
					Key:               "mux_audio",
					ElementaryStreams: []string{"es_audio"},
					SegmentSettings: &livestreampb.SegmentSettings{
						SegmentDuration: &duration.Duration{
							Seconds: 2,
						},
					},
				},
			},
			Manifests: []*livestreampb.Manifest{
				{
					FileName:        "manifest.m3u8",
					Type:            livestreampb.Manifest_HLS,
					MuxStreams:      []string{"mux_video", "mux_audio"},
					MaxSegmentCount: 5,
				},
			},
		},
	}
	// Creates the channel.
	op, err := client.CreateChannel(ctx, req)
	if err != nil {
		return fmt.Errorf("CreateChannel: %w", err)
	}
	response, err := op.Wait(ctx)
	if err != nil {
		return fmt.Errorf("Wait: %w", err)
	}

	fmt.Fprintf(w, "Channel: %v", response.Name)
	return nil
}

Java


import com.google.cloud.video.livestream.v1.AudioStream;
import com.google.cloud.video.livestream.v1.Channel;
import com.google.cloud.video.livestream.v1.Channel.Output;
import com.google.cloud.video.livestream.v1.CreateChannelRequest;
import com.google.cloud.video.livestream.v1.ElementaryStream;
import com.google.cloud.video.livestream.v1.InputAttachment;
import com.google.cloud.video.livestream.v1.InputName;
import com.google.cloud.video.livestream.v1.LivestreamServiceClient;
import com.google.cloud.video.livestream.v1.LocationName;
import com.google.cloud.video.livestream.v1.Manifest;
import com.google.cloud.video.livestream.v1.Manifest.ManifestType;
import com.google.cloud.video.livestream.v1.MuxStream;
import com.google.cloud.video.livestream.v1.SegmentSettings;
import com.google.cloud.video.livestream.v1.VideoStream;
import com.google.cloud.video.livestream.v1.VideoStream.H264CodecSettings;
import com.google.protobuf.Duration;
import java.io.IOException;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class CreateChannel {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "my-project-id";
    String location = "us-central1";
    String channelId = "my-channel-id";
    String inputId = "my-input-id";
    String outputUri = "gs://my-bucket/my-output-folder/";

    createChannel(projectId, location, channelId, inputId, outputUri);
  }

  public static void createChannel(
      String projectId, String location, String channelId, String inputId, String outputUri)
      throws InterruptedException, ExecutionException, TimeoutException, IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    LivestreamServiceClient livestreamServiceClient = LivestreamServiceClient.create();
    VideoStream videoStream =
        VideoStream.newBuilder()
            .setH264(
                H264CodecSettings.newBuilder()
                    .setProfile("high")
                    .setBitrateBps(3000000)
                    .setFrameRate(30)
                    .setHeightPixels(720)
                    .setWidthPixels(1280))
            .build();

    AudioStream audioStream =
        AudioStream.newBuilder().setCodec("aac").setChannelCount(2).setBitrateBps(160000).build();

    var createChannelRequest =
        CreateChannelRequest.newBuilder()
            .setParent(LocationName.of(projectId, location).toString())
            .setChannelId(channelId)
            .setChannel(
                Channel.newBuilder()
                    .addInputAttachments(
                        0,
                        InputAttachment.newBuilder()
                            .setKey("my-input")
                            .setInput(InputName.of(projectId, location, inputId).toString())
                            .build())
                    .setOutput(Output.newBuilder().setUri(outputUri).build())
                    .addElementaryStreams(
                        ElementaryStream.newBuilder()
                            .setKey("es_video")
                            .setVideoStream(videoStream))
                    .addElementaryStreams(
                        ElementaryStream.newBuilder()
                            .setKey("es_audio")
                            .setAudioStream(audioStream))
                    .addMuxStreams(
                        MuxStream.newBuilder()
                            .setKey("mux_video")
                            .addElementaryStreams("es_video")
                            .setSegmentSettings(
                                SegmentSettings.newBuilder()
                                    .setSegmentDuration(
                                        Duration.newBuilder().setSeconds(2).build())
                                    .build())
                            .build())
                    .addMuxStreams(
                        MuxStream.newBuilder()
                            .setKey("mux_audio")
                            .addElementaryStreams("es_audio")
                            .setSegmentSettings(
                                SegmentSettings.newBuilder()
                                    .setSegmentDuration(
                                        Duration.newBuilder().setSeconds(2).build())
                                    .build())
                            .build())
                    .addManifests(
                        Manifest.newBuilder()
                            .setFileName("manifest.m3u8")
                            .setType(ManifestType.HLS)
                            .addMuxStreams("mux_video")
                            .addMuxStreams("mux_audio")
                            .setMaxSegmentCount(5)
                            .build()))
            .build();
    // First API call in a project can take up to 10 minutes.
    Channel result =
        livestreamServiceClient
            .createChannelAsync(createChannelRequest)
            .get(10, TimeUnit.MINUTES);
    System.out.println("Channel: " + result.getName());
    livestreamServiceClient.close();
  }
}

Node.js

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// projectId = 'my-project-id';
// location = 'us-central1';
// channelId = 'my-channel';
// inputId = 'my-input';
// outputUri = 'gs://my-bucket/my-output-folder/';

// Imports the Livestream library
const {LivestreamServiceClient} = require('@google-cloud/livestream').v1;

// Instantiates a client
const livestreamServiceClient = new LivestreamServiceClient();

async function createChannel() {
  // Construct request
  const request = {
    parent: livestreamServiceClient.locationPath(projectId, location),
    channelId: channelId,
    channel: {
      inputAttachments: [
        {
          key: 'my-input',
          input: livestreamServiceClient.inputPath(
            projectId,
            location,
            inputId
          ),
        },
      ],
      output: {
        uri: outputUri,
      },
      elementaryStreams: [
        {
          key: 'es_video',
          videoStream: {
            h264: {
              profile: 'high',
              heightPixels: 720,
              widthPixels: 1280,
              bitrateBps: 3000000,
              frameRate: 30,
            },
          },
        },
        {
          key: 'es_audio',
          audioStream: {
            codec: 'aac',
            channelCount: 2,
            bitrateBps: 160000,
          },
        },
      ],
      muxStreams: [
        {
          key: 'mux_video',
          elementaryStreams: ['es_video'],
          segmentSettings: {
            seconds: 2,
          },
        },
        {
          key: 'mux_audio',
          elementaryStreams: ['es_audio'],
          segmentSettings: {
            seconds: 2,
          },
        },
      ],
      manifests: [
        {
          fileName: 'manifest.m3u8',
          type: 'HLS',
          muxStreams: ['mux_video', 'mux_audio'],
          maxSegmentCount: 5,
        },
      ],
    },
  };

  // Run request
  const [operation] = await livestreamServiceClient.createChannel(request);
  const response = await operation.promise();
  const [channel] = response;
  console.log(`Channel: ${channel.name}`);
}

createChannel();

PHP

use Google\Cloud\Video\LiveStream\V1\AudioStream;
use Google\Cloud\Video\LiveStream\V1\Channel;
use Google\Cloud\Video\LiveStream\V1\ElementaryStream;
use Google\Cloud\Video\LiveStream\V1\InputAttachment;
use Google\Cloud\Video\LiveStream\V1\Client\LivestreamServiceClient;
use Google\Cloud\Video\LiveStream\V1\CreateChannelRequest;
use Google\Cloud\Video\LiveStream\V1\Manifest;
use Google\Cloud\Video\LiveStream\V1\MuxStream;
use Google\Cloud\Video\LiveStream\V1\SegmentSettings;
use Google\Cloud\Video\LiveStream\V1\VideoStream;
use Google\Protobuf\Duration;

/**
 * Creates a channel.
 *
 * @param string  $callingProjectId   The project ID to run the API call under
 * @param string  $location           The location of the channel
 * @param string  $channelId          The ID of the channel to be created
 * @param string  $inputId            The ID of the input for the channel
 * @param string  $outputUri          Uri of the channel output folder in a
 *                                    Cloud Storage bucket. (e.g.
 *                                    "gs://my-bucket/my-output-folder/")
 */
function create_channel(
    string $callingProjectId,
    string $location,
    string $channelId,
    string $inputId,
    string $outputUri
): void {
    // Instantiate a client.
    $livestreamClient = new LivestreamServiceClient();

    $parent = $livestreamClient->locationName($callingProjectId, $location);
    $channelName = $livestreamClient->channelName($callingProjectId, $location, $channelId);
    $inputName = $livestreamClient->inputName($callingProjectId, $location, $inputId);

    $channel = (new Channel())
        ->setName($channelName)
        ->setInputAttachments([
            new InputAttachment([
                'key' => 'my-input',
                'input' => $inputName
            ])
        ])
        ->setElementaryStreams([
            new ElementaryStream([
                'key' => 'es_video',
                'video_stream' => new VideoStream([
                    'h264' => new VideoStream\H264CodecSettings([
                        'profile' => 'high',
                        'width_pixels' => 1280,
                        'height_pixels' => 720,
                        'bitrate_bps' => 3000000,
                        'frame_rate' => 30
                    ])
                ]),
            ]),
            new ElementaryStream([
                'key' => 'es_audio',
                'audio_stream' => new AudioStream([
                    'codec' => 'aac',
                    'channel_count' => 2,
                    'bitrate_bps' => 160000
                ])
            ])
        ])
        ->setOutput(new Channel\Output(['uri' => $outputUri]))
        ->setMuxStreams([
            new MuxStream([
                'key' => 'mux_video',
                'elementary_streams' => ['es_video'],
                'segment_settings' => new SegmentSettings([
                    'segment_duration' => new Duration(['seconds' => 2])
                ])
            ]),
            new MuxStream([
                'key' => 'mux_audio',
                'elementary_streams' => ['es_audio'],
                'segment_settings' => new SegmentSettings([
                    'segment_duration' => new Duration(['seconds' => 2])
                ])
            ]),
        ])
        ->setManifests([
            new Manifest([
                'file_name' => 'manifest.m3u8',
                'type' => Manifest\ManifestType::HLS,
                'mux_streams' => ['mux_video', 'mux_audio'],
                'max_segment_count' => 5
            ])
        ]);

    // Run the channel creation request. The response is a long-running operation ID.
    $request = (new CreateChannelRequest())
        ->setParent($parent)
        ->setChannel($channel)
        ->setChannelId($channelId);
    $operationResponse = $livestreamClient->createChannel($request);
    $operationResponse->pollUntilComplete();
    if ($operationResponse->operationSucceeded()) {
        $result = $operationResponse->getResult();
        // Print results
        printf('Channel: %s' . PHP_EOL, $result->getName());
    } else {
        $error = $operationResponse->getError();
        // handleError($error)
    }
}

Python


import argparse

from google.cloud.video import live_stream_v1
from google.cloud.video.live_stream_v1.services.livestream_service import (
    LivestreamServiceClient,
)
from google.protobuf import duration_pb2 as duration


def create_channel(
    project_id: str, location: str, channel_id: str, input_id: str, output_uri: str
) -> live_stream_v1.types.Channel:
    """Creates a channel.
    Args:
        project_id: The GCP project ID.
        location: The location in which to create the channel.
        channel_id: The user-defined channel ID.
        input_id: The user-defined input ID.
        output_uri: Uri of the channel output folder in a Cloud Storage bucket."""

    client = LivestreamServiceClient()
    parent = f"projects/{project_id}/locations/{location}"
    input = f"projects/{project_id}/locations/{location}/inputs/{input_id}"
    name = f"projects/{project_id}/locations/{location}/channels/{channel_id}"

    channel = live_stream_v1.types.Channel(
        name=name,
        input_attachments=[
            live_stream_v1.types.InputAttachment(
                key="my-input",
                input=input,
            ),
        ],
        output=live_stream_v1.types.Channel.Output(
            uri=output_uri,
        ),
        elementary_streams=[
            live_stream_v1.types.ElementaryStream(
                key="es_video",
                video_stream=live_stream_v1.types.VideoStream(
                    h264=live_stream_v1.types.VideoStream.H264CodecSettings(
                        profile="high",
                        width_pixels=1280,
                        height_pixels=720,
                        bitrate_bps=3000000,
                        frame_rate=30,
                    ),
                ),
            ),
            live_stream_v1.types.ElementaryStream(
                key="es_audio",
                audio_stream=live_stream_v1.types.AudioStream(
                    codec="aac", channel_count=2, bitrate_bps=160000
                ),
            ),
        ],
        mux_streams=[
            live_stream_v1.types.MuxStream(
                key="mux_video",
                elementary_streams=["es_video"],
                segment_settings=live_stream_v1.types.SegmentSettings(
                    segment_duration=duration.Duration(
                        seconds=2,
                    ),
                ),
            ),
            live_stream_v1.types.MuxStream(
                key="mux_audio",
                elementary_streams=["es_audio"],
                segment_settings=live_stream_v1.types.SegmentSettings(
                    segment_duration=duration.Duration(
                        seconds=2,
                    ),
                ),
            ),
        ],
        manifests=[
            live_stream_v1.types.Manifest(
                file_name="manifest.m3u8",
                type_="HLS",
                mux_streams=["mux_video", "mux_audio"],
                max_segment_count=5,
            ),
        ],
    )
    operation = client.create_channel(
        parent=parent, channel=channel, channel_id=channel_id
    )
    response = operation.result(600)
    print(f"Channel: {response.name}")

    return response

Ruby

require "google/cloud/video/live_stream"

##
# Create a channel
#
# @param project_id [String] Your Google Cloud project (e.g. "my-project")
# @param location [String] The location (e.g. "us-central1")
# @param channel_id [String] Your channel name (e.g. "my-channel")
# @param input_id [String] Your input name (e.g. "my-input")
# @param output_uri [String] Uri of the channel output folder in a Cloud Storage
#     bucket. (e.g. "gs://my-bucket/my-output-folder/";)
#
def create_channel project_id:, location:, channel_id:, input_id:, output_uri:
  # Create a Live Stream client.
  client = Google::Cloud::Video::LiveStream.livestream_service

  # Build the resource name of the parent.
  parent = client.location_path project: project_id, location: location
  # Build the resource name of the input.
  input_path = client.input_path project: project_id, location: location, input: input_id

  # Set the channel fields.
  new_channel = {
    input_attachments: [
      {
        key: "my-input",
        input: input_path
      }
    ],
    output: {
      uri: output_uri
    },
    elementary_streams: [
      {
        key: "es_video",
        video_stream: {
          h264: {
            profile: "high",
            bitrate_bps: 3_000_000,
            frame_rate: 30,
            height_pixels: 720,
            width_pixels: 1280
          }
        }
      },
      {
        key: "es_audio",
        audio_stream: {
          codec: "aac",
          channel_count: 2,
          bitrate_bps: 160_000
        }
      }
    ],
    mux_streams: [
      {
        key: "mux_video",
        elementary_streams: [
          "es_video"
        ],
        segment_settings: {
          segment_duration: {
            seconds: 2
          }
        }
      },
      {
        key: "mux_audio",
        elementary_streams: [
          "es_audio"
        ],
        segment_settings: {
          segment_duration: {
            seconds: 2
          }
        }
      }
    ],
    manifests: [
      {
        file_name: "main.m3u8",
        type: Google::Cloud::Video::LiveStream::V1::Manifest::ManifestType::HLS,
        mux_streams: [
          "mux_video", "mux_audio"
        ],
        max_segment_count: 5
      }
    ]
  }

  operation = client.create_channel parent: parent, channel: new_channel, channel_id: channel_id

  # The returned object is of type Gapic::Operation. You can use this
  # object to check the status of an operation, cancel it, or wait
  # for results. Here is how to block until completion:
  operation.wait_until_done!

  # Print the channel name.
  puts "Channel: #{operation.response.name}"
end

Inicie o canal

Para iniciar um canal, use o método projects.locations.channels.start.

REST

Antes de usar qualquer um dos dados do pedido, faça as seguintes substituições:

PROJECT_NUMBER: o número do seu Google Cloud projeto; encontra-se no campo Número do projeto na página Definições do IAM
LOCATION: a localização onde o seu canal está localizado; use uma das regiões suportadas
Mostrar localizações
- us-central1
- us-east1
- us-east4
- us-west1
- us-west2
- northamerica-northeast1
- southamerica-east1
- asia-east1
- asia-east2
- asia-south1
- asia-northeast1
- asia-southeast1
- australia-southeast1
- europe-north1
- europe-west1
- europe-west2
- europe-west3
- europe-west4
CHANNEL_ID: um identificador definido pelo utilizador para o canal

Para enviar o seu pedido, expanda uma destas opções:

curl (Linux, macOS ou Cloud Shell)

Execute o seguinte comando:

curl -X POST \
     -H "Authorization: Bearer $(gcloud auth print-access-token)" \
     -H "Content-Type: application/json; charset=utf-8" \
     -d "" \
     "https://livestream.googleapis.com/v1/projects/PROJECT_NUMBER/locations/LOCATION/channels/CHANNEL_ID:start"

PowerShell (Windows)

Execute o seguinte comando:

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method POST `
    -Headers $headers `
    -Uri "https://livestream.googleapis.com/v1/projects/PROJECT_NUMBER/locations/LOCATION/channels/CHANNEL_ID:start" | Select-Object -Expand Content

Deve receber uma resposta JSON semelhante à seguinte:

{
  "name": "projects/PROJECT_NUMBER/locations/LOCATION/operations/OPERATION_ID",
  "metadata": {
    "@type": "type.googleapis.com/google.cloud.video.livestream.v1.OperationMetadata",
    "createTime": CREATE_TIME,
    "target": "projects/PROJECT_NUMBER/locations/LOCATION/channels/CHANNEL_ID",
    "verb": "start",
    "requestedCancellation": false,
    "apiVersion": "v1"
  },
  "done": false
}

C#


using Google.Cloud.Video.LiveStream.V1;
using Google.LongRunning;
using System.Threading.Tasks;

public class StartChannelSample
{
    public async Task StartChannelAsync(
         string projectId, string locationId, string channelId)
    {
        // Create the client.
        LivestreamServiceClient client = LivestreamServiceClient.Create();

        StartChannelRequest request = new StartChannelRequest
        {
            ChannelName = ChannelName.FromProjectLocationChannel(projectId, locationId, channelId)
        };

        // Make the request.
        Operation<ChannelOperationResponse, OperationMetadata> response = await client.StartChannelAsync(request);

        // Poll until the returned long-running operation is complete.
        await response.PollUntilCompletedAsync();
    }
}

Go

import (
	"context"
	"fmt"
	"io"

	livestream "cloud.google.com/go/video/livestream/apiv1"
	"cloud.google.com/go/video/livestream/apiv1/livestreampb"
)

// startChannel starts a channel.
func startChannel(w io.Writer, projectID, location, channelID string) error {
	// projectID := "my-project-id"
	// location := "us-central1"
	// channelID := "my-channel-id"
	ctx := context.Background()
	client, err := livestream.NewClient(ctx)
	if err != nil {
		return fmt.Errorf("NewClient: %w", err)
	}
	defer client.Close()

	req := &livestreampb.StartChannelRequest{
		Name: fmt.Sprintf("projects/%s/locations/%s/channels/%s", projectID, location, channelID),
	}

	op, err := client.StartChannel(ctx, req)
	if err != nil {
		return fmt.Errorf("StartChannel: %w", err)
	}
	_, err = op.Wait(ctx)
	if err != nil {
		return fmt.Errorf("Wait: %w", err)
	}

	fmt.Fprintf(w, "Started channel")
	return nil
}

Java


import com.google.cloud.video.livestream.v1.ChannelName;
import com.google.cloud.video.livestream.v1.LivestreamServiceClient;
import java.io.IOException;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class StartChannel {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "my-project-id";
    String location = "us-central1";
    String channelId = "my-channel-id";

    startChannel(projectId, location, channelId);
  }

  public static void startChannel(String projectId, String location, String channelId)
      throws InterruptedException, ExecutionException, TimeoutException, IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    LivestreamServiceClient livestreamServiceClient = LivestreamServiceClient.create();
    ChannelName name = ChannelName.of(projectId, location, channelId);
    // First API call in a project can take up to 15 minutes.
    livestreamServiceClient.startChannelAsync(name).get(15, TimeUnit.MINUTES);
    System.out.println("Started channel");
    livestreamServiceClient.close();
  }
}

Node.js

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// projectId = 'my-project-id';
// location = 'us-central1';
// channelId = 'my-channel';

// Imports the Livestream library
const {LivestreamServiceClient} = require('@google-cloud/livestream').v1;

// Instantiates a client
const livestreamServiceClient = new LivestreamServiceClient();

async function startChannel() {
  // Construct request
  const request = {
    name: livestreamServiceClient.channelPath(projectId, location, channelId),
  };
  const [operation] = await livestreamServiceClient.startChannel(request);
  await operation.promise();
  console.log('Started channel');
}

startChannel();

PHP

use Google\Cloud\Video\LiveStream\V1\Client\LivestreamServiceClient;
use Google\Cloud\Video\LiveStream\V1\StartChannelRequest;

/**
 * Starts a channel.
 *
 * @param string  $callingProjectId   The project ID to run the API call under
 * @param string  $location           The location of the channel
 * @param string  $channelId          The ID of the channel
 */
function start_channel(
    string $callingProjectId,
    string $location,
    string $channelId
): void {
    // Instantiate a client.
    $livestreamClient = new LivestreamServiceClient();
    $formattedName = $livestreamClient->channelName($callingProjectId, $location, $channelId);

    // Run the channel start request. The response is a long-running operation ID.
    $request = (new StartChannelRequest())
        ->setName($formattedName);
    $operationResponse = $livestreamClient->startChannel($request);
    $operationResponse->pollUntilComplete();
    if ($operationResponse->operationSucceeded()) {
        // Print results
        printf('Started channel' . PHP_EOL);
    } else {
        $error = $operationResponse->getError();
        // handleError($error)
    }
}

Python


import argparse

from google.cloud.video import live_stream_v1
from google.cloud.video.live_stream_v1.services.livestream_service import (
    LivestreamServiceClient,
)


def start_channel(
    project_id: str, location: str, channel_id: str
) -> live_stream_v1.types.ChannelOperationResponse:
    """Starts a channel.
    Args:
        project_id: The GCP project ID.
        location: The location of the channel.
        channel_id: The user-defined channel ID."""

    client = LivestreamServiceClient()

    name = f"projects/{project_id}/locations/{location}/channels/{channel_id}"
    operation = client.start_channel(name=name)
    response = operation.result(900)
    print("Started channel")

    return response

Ruby

require "google/cloud/video/live_stream"

##
# Starts a channel
#
# @param project_id [String] Your Google Cloud project (e.g. "my-project")
# @param location [String] The location (e.g. "us-central1")
# @param channel_id [String] Your channel name (e.g. "my-channel")
#
def start_channel project_id:, location:, channel_id:
  # Create a Live Stream client.
  client = Google::Cloud::Video::LiveStream.livestream_service

  # Build the resource name of the channel.
  name = client.channel_path project: project_id, location: location, channel: channel_id

  # Start the channel.
  operation = client.start_channel name: name

  # The returned object is of type Gapic::Operation. You can use this
  # object to check the status of an operation, cancel it, or wait
  # for results. Here is how to block until completion:
  operation.wait_until_done!

  # Print a success message.
  puts "Started channel"
end

Envie a stream de entrada

Se estiver a usar o ffmpeg para enviar uma stream de teste, abra uma nova janela de terminal. Execute o seguinte comando usando INPUT_STREAM_URI da secção Obter detalhes do ponto final de entrada:

ffmpeg -re -f lavfi -i "testsrc=size=1280x720 [out0]; sine=frequency=500 [out1]" \
  -acodec aac -vcodec h264 -f flv INPUT_STREAM_URI

Ver a stream em direto

Para reproduzir o ficheiro multimédia gerado no Shaka Player, conclua os seguintes passos:

Torne o contentor do Cloud Storage que criou publicamente legível.
Para ativar a partilha de recursos de origem cruzada (CORS) num contentor do Cloud Storage, faça o seguinte:
1. Crie um ficheiro JSON que contenha o seguinte:
```
[
  {
    "origin": ["https://shaka-player-demo.appspot.com/"],
    "responseHeader": ["Content-Type", "Range"],
    "method": ["GET", "HEAD"],
    "maxAgeSeconds": 3600
  }
]
```
2. Execute o seguinte comando depois de substituir JSON_FILE_NAME pelo nome do ficheiro JSON que criou no passo anterior:
```
gcloud storage buckets update gs://BUCKET_NAME --cors-file=JSON_FILE_NAME.json
```
No contentor do Cloud Storage, encontre o ficheiro gerado. Clique em Copiar URL na coluna Acesso público do ficheiro.
Navegue para o Shaka Player, um leitor de streams em direto online.
Clique em Conteúdo personalizado na barra de navegação superior.
Clique no botão +.
Cole o URL público do ficheiro na caixa URL do manifesto.
Introduza um nome na caixa Nome.
Clique em Guardar.
Clique em Jogar.

Deve ver um padrão de teste a ser reproduzido como stream em direto.

Vídeo de padrão de teste

Crie um evento de canal

Para criar um evento de canal, use o método projects.locations.channels.events.create. O exemplo seguinte insere a ardósia como um evento do canal na stream em direto.

Se o recurso de indicação não estiver pronto (dois segundos após o início da execução do evento), é apresentado um ecrã preto até o recurso de indicação estar pronto.

REST

Antes de usar qualquer um dos dados do pedido, faça as seguintes substituições:

PROJECT_NUMBER: o número do seu Google Cloud projeto; encontra-se no campo Número do projeto na página Definições do IAM
LOCATION: a localização onde o seu canal está localizado; use uma das regiões suportadas
Mostrar localizações
- us-central1
- us-east1
- us-east4
- us-west1
- us-west2
- northamerica-northeast1
- southamerica-east1
- asia-east1
- asia-east2
- asia-south1
- asia-northeast1
- asia-southeast1
- australia-southeast1
- europe-north1
- europe-west1
- europe-west2
- europe-west3
- europe-west4
CHANNEL_ID: um identificador definido pelo utilizador para o canal
EVENT_ID: um identificador definido pelo utilizador para o evento
ASSET_ID: o identificador definido pelo utilizador para o recurso de ardósia

Para enviar o seu pedido, expanda uma destas opções:

curl (Linux, macOS ou Cloud Shell)

Guarde o corpo do pedido num ficheiro denominado request.json. Execute o seguinte comando no terminal para criar ou substituir este ficheiro no diretório atual:

cat > request.json << 'EOF'
{
  "slate": {
    "asset": "projects/PROJECT_NUMBER/locations/LOCATION/assets/ASSET_ID",
    "duration": "60s"
  },
  "executeNow": "true"
}
EOF

Em seguida, execute o seguinte comando para enviar o seu pedido REST:

curl -X POST \
     -H "Authorization: Bearer $(gcloud auth print-access-token)" \
     -H "Content-Type: application/json; charset=utf-8" \
     -d @request.json \
     "https://livestream.googleapis.com/v1/projects/PROJECT_NUMBER/locations/LOCATION/channels/CHANNEL_ID/events?eventId=EVENT_ID"

PowerShell (Windows)

Guarde o corpo do pedido num ficheiro denominado request.json. Execute o seguinte comando no terminal para criar ou substituir este ficheiro no diretório atual:

@'
{
  "slate": {
    "asset": "projects/PROJECT_NUMBER/locations/LOCATION/assets/ASSET_ID",
    "duration": "60s"
  },
  "executeNow": "true"
}
'@  | Out-File -FilePath request.json -Encoding utf8

Em seguida, execute o seguinte comando para enviar o seu pedido REST:

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method POST `
    -Headers $headers `
    -ContentType: "application/json; charset=utf-8" `
    -InFile request.json `
    -Uri "https://livestream.googleapis.com/v1/projects/PROJECT_NUMBER/locations/LOCATION/channels/CHANNEL_ID/events?eventId=EVENT_ID" | Select-Object -Expand Content

Deve receber uma resposta JSON semelhante à seguinte:

{
  "name": "projects/PROJECT_NUMBER/locations/LOCATION/channels/CHANNEL_ID/events/EVENT_ID",
  "createTime": CREATE_TIME,
  "updateTime": UPDATE_TIME,
  "slate": {
    "duration": "60s",
    "asset": "projects/PROJECT_NUMBER/locations/LOCATION/assets/ASSET_ID"
  },
  "executeNow": "true",
  "state": "PENDING"
}

Verifique a stream em direto para ver se a claquete foi inserida. Também pode verificar se o valor de state está definido como SUCCEEDED (consulte a secção Obtenha detalhes de eventos do canal).

Para criar uma indicação de duração longa, remova o campo duration do objeto slate. Para remover uma apresentação prolongada, crie um evento de canal de regresso ao programa.

Insira uma faixa numa stream em direto Mantenha tudo organizado com as coleções Salve e categorize o conteúdo com base nas suas preferências.

Configure o seu Google Cloud projeto e autenticação

Carregue um vídeo para o seu contentor do Cloud Storage

Crie um recurso

REST

curl (Linux, macOS ou Cloud Shell)

PowerShell (Windows)

C#

Go

Java

Node.js

PHP

Python

Ruby

Crie um ponto final de entrada

REST

curl (Linux, macOS ou Cloud Shell)

PowerShell (Windows)

C#

Go

Java

Node.js

PHP

Python

Ruby

Obtenha detalhes do ponto final de entrada

REST

curl (Linux, macOS ou Cloud Shell)

PowerShell (Windows)

C#

Go

Java

Node.js

PHP

Python

Ruby

Crie um canal

REST

curl (Linux, macOS ou Cloud Shell)

PowerShell (Windows)

C#

Go

Java

Node.js

PHP

Python

Ruby

Inicie o canal

REST

curl (Linux, macOS ou Cloud Shell)

PowerShell (Windows)

C#

Go

Java

Node.js

PHP

Python

Ruby

Envie a stream de entrada

Ver a stream em direto

Crie um evento de canal

REST

curl (Linux, macOS ou Cloud Shell)

PowerShell (Windows)

Insira uma faixa numa stream em direto