This page describes the IP network ports that Transfer Appliance uses
during transfers. Work with your network administrator to verify that all
required ports are configured appropriately for a successful transfer.

## Required ports for attestation service

After you receive your appliance, you must run the attestation service to ensure
that the appliance hasn't been tampered with during shipping. The following
table describes the IP network port that is used to run the attestation
application.

| Service | IP Ports | IP Protocol | Notes |
|---|---|---|---|
| Attestation service | 8081 | TCP | Run the Transfer Appliance attestation application after you receive the appliance to ensure it hasn't been tampered with during shipping. For more information on how to validate your appliance, refer to the [Receive your Transfer Appliance](https://docs.cloud.google.com/transfer-appliance/docs/4.0/receive-appliance.md.txt#validate) page. |

## Required ports for NFS

Transfer Appliance supports NFS for transfers originating from Linux
and Apple macOS workstations. The following table describes the IP network ports
that must be enabled on your network to use NFS with
Transfer Appliance:

| Service | IP Ports | IP Protocol |
|---|---|---|
| rcpbind | 111 | TCP and UDP |
| NFS | 2049 | TCP and UDP |
| statd | 32765--32766 | TCP |
| mountd | 32757 | TCP |
| nlockmgr | 32764,32768 | UDP |

## Required ports for SSH or SCP

Transfer Appliance supports SSH or SCP for transfers originating from
Microsoft Windows, Linux, and Apple macOS workstations. The following table
describes the IP network port that must be enabled on your network to use SSH or
SCP with Transfer Appliance:

| Service | IP Ports | IP Protocol | Notes |
|---|---|---|---|
| SSH | 22 | TCP | You can connect to Transfer Appliance using SSH while connected to the management port. The management port is typically used to validate the appliance. For more information, refer to [Validating the appliance](https://docs.cloud.google.com/transfer-appliance/docs/4.0/installation-guide#validate). |

## Optional ports

Transfer Appliance can use DHCP, but it isn't
required to use Transfer Appliance. The following table describes the
optional IP network port for Transfer Appliance:

| Service | IP Ports | IP Protocol | Notes |
|---|---|---|---|
| DHCP | 68 | UDP | This port is optional if you use static IP assignments on your network. For more information on configuring Transfer Appliance to use a static IP address, refer to [Configuring appliance software](https://docs.cloud.google.com/transfer-appliance/docs/4.0/installation-guide#configure-appliance). |