[Video](https://www.youtube.com/watch?v=KKFp1Y9cL58)

This document provides an overview of the Google Spectrum Access System (SAS) Portal,
including the tasks that you can perform in the SAS Portal.

The SAS Portal helps you to create and sign
Citizens Broadband Radio Service Devices (CBSDs). You
can monitor status, manage access of your network across users, and access
CBSD support resources. To sign in to the
SAS Portal, go to the
[SAS Portal](https://wirelessconnectivity.google.com/sas/welcome).

## CBSD configurations

A [CBSD configuration](https://docs.cloud.google.com/spectrum-access-system/docs/key-terms.md.txt#cbsd-config)
is a set of registration parameters for a [CBSD](https://docs.cloud.google.com/spectrum-access-system/docs/key-terms.md.txt#cbsd).
There are two types of configurations:

- **Active:** the configuration that is currently registered with SAS.

- **Inactive:** the configuration that reflects any changes made to the active configuration.
  Inactive configurations are in one of the following states:

  - **Draft:** the registration parameters are incomplete. For example, mandatory fields are missing.
  - **Ready for CPI:** a [Certified Professional Installer (CPI)](https://docs.cloud.google.com/spectrum-access-system/docs/key-terms.md.txt#cpi) needs to validate and sign the registration parameters.
  - **Pending registration:** a CPI has validated and signed the registration parameters. SAS is waiting for the CBSD to send a registration request.

## CBSD configuration changes in the SAS Portal

SAS always uses the values of the installation parameters sent by
the CBSD in the registration request. This overrides any
parameters submitted through the SAS Portal or the
SAS Portal API. Use the SAS Portal or the
SAS Portal API to modify device parameters and remove
`cpiSignatureData` from the registration request in your CBSD or
[Domain Proxy (DP)](https://docs.cloud.google.com/spectrum-access-system/docs/key-terms.md.txt#dp): `cpiSignatureData`.

> [!IMPORTANT]
> **Important:** If the data source that the CBSD uses isn't complete, the registration is rejected. Data from the different sources are not merged.

The following table explains the installation parameters that are used in each case.

| Parameters | CBSD configurations signed in the SAS Portal (web or API) | CBSD configurations not signed in the SAS Portal (web or API) |
|---|---|---|
| `cpiSignatureData` in the registration request | Use the information found in `cpiSignatureData` | Use the information found in `cpiSignatureData` |
| No `cpiSignatureData` in the registration request | Use the information in the SAS Portal | Registration fails |

For more information about how to import and edit CBSD configurations, see
[Manage CBSD configurations](https://docs.cloud.google.com/spectrum-access-system/docs/cbsd/manage-configurations.md.txt).

## Register a CBSD that needs CPI validation

You can use the SAS Portal to register a CBSD that
needs CPI validation by adding and signing a CBSD and then
sending the registration request to SAS. For details, see the
following sections.

### Add a CBSD

If you have Editor permissions, you can add a CBSD
configuration from the map or table view in the SAS Portal. To add
a CBSD configuration, follow these steps:

1. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas/).
2. On the left, click **SAS Portal**.
3. To add a new site, do one of the following.
   - To add a new site in **Map view** :
     1. Click **New site**.
     2. Click anywhere in the map to add latitude and longitude.
   - To add a new site in **Table view** , click **Create CBSD**.
4. On the right, click **Location**.
5. For **Location**, enter or verify the latitude and longitude.
6. To add a device to the site, click **Add**.
7. To enter the CBSD configuration, click **New CBSD** .
   - If you have all the required fields for your CBSD type, click **Ready for CPI**.
   - If you don't have all the required information, click **Save** to save the configuration as a **Draft**.

### Sign a CBSD (CPI only)

If you're a verified CPI, you can validate the installation parameters of a
CBSD when you sign the
CBSD configuration in the SAS Portal.

To validate the installation parameters of a CBSD, follow these steps:

1. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas/).
2. Click **View deployments**.
3. If you have access to multiple deployments, select a deployment from the **Deployments** list, and then click **Open**.
4. On the right, click **Settings** :
   - In **Map view** , click **CBSD
     location marker**.
   - In **Table view**, click the row of the CBSD.
5. Review the configuration to make sure that all the required fields are complete and correct.
6. Click **Sign** . The CBSD configuration changes to **Pending registration**.

If any incorrect configuration is signed, you need to immediately fix the
information and sign the new configuration. The new information does not take
effect until the CBSD successfully re-registers. After
re-registration, make sure that the **Active** configuration reflects the correct
information.

> [!IMPORTANT]
> **Important:** If you don't fix any incorrect information, you will lose your CPI certification.

You can [create new CBSD configurations in bulk](https://docs.cloud.google.com/spectrum-access-system/docs/cbsd/manage-configurations.md.txt#start-import)
when you import CBSD configurations. If you are a CPI, you can
directly import signed CBSD configurations; otherwise, they
appear in the SAS Portal in **Ready for CPI** status.

### Send a registration request to SAS

To send a registration request, see your CBSD documentation. Some
CBSDs send a registration request when they're turned on. The
registration request from the CBSD must *not include* any
installation parameters.

SAS uses the signed installation parameters of the
CBSD configuration in the SAS Portal. The
SAS Portal and CBSD registration request can
provide other parameters, such as Effective Isotropic Radiated Power (EIRP)
capability or antenna model. If this happens, SAS uses the values
that the CBSD sent in the registration request.

## Analyze your network status

With the Device dashboard, you can analyze the state of your network and apply
filters to show only the devices that you want to analyze.

To use the device dashboard, follow these steps:

1. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas/).
2. Optional: Click **View deployments**.
3. Select the deployment, and then click **Open**.
4. On the left, click **Dashboard view**.
5. From the dashboard, you can do the following:
   - Review your network details.
   - Apply a filter. To apply a filter, select **View devices**.
   - Export data. To export data as a CSV or PNG, click **Menu** on the right of the graph.

## Integrate with the SAS Portal API

To extend your network management system to manage the spectrum of your
CBSDs connected to SAS, you can use the
SAS Portal API. The SAS Portal API lets you use
the same functionalities as the SAS Portal.
[Learn how to use the SAS Portal API](https://docs.cloud.google.com/spectrum-access-system/docs/overview-api.md.txt).

## What's next

- Learn about [user roles](https://docs.cloud.google.com/spectrum-access-system/docs/users-sasportal.md.txt).
- Learn [how to verify your CPI identity](https://docs.cloud.google.com/spectrum-access-system/docs/validate-cpi-certification.md.txt).
- Learn about [Spectrum Access System](https://docs.cloud.google.com/spectrum-access-system/docs/overview.md.txt).
- Learn about [key SAS terms](https://docs.cloud.google.com/spectrum-access-system/docs/key-terms.md.txt).
- [Troubleshoot SAS issues](https://docs.cloud.google.com/spectrum-access-system/docs/troubleshooting.md.txt).