This document provides information about how to choose the best channels for a
Citizens Broadband Radio Service Device (CBSD). The Google Spectrum Access System (SAS) Portal offers
channel guidance to help you maximize the Citizens Broadband Radio Service (CBRS) spectrum and
manage interference.

In the SAS Portal, the **Coex** tab shows a ranked recommendation
of channels for a CBSD. These recommendations are based
on channel availability and the SAS assessment of *channel quality* .
Channel quality is a combination of the level of interference
and the
[Effective Isotropic Radiated Power (EIRP)](https://docs.cloud.google.com/spectrum-access-system/docs/key-terms.md.txt#eirp) available.

The **Coex** tab is available for all registered CBSDs. It is also
available for unregistered CBSDs in a **Ready for CPI** or **Pending
Registration** configuration state.

> [!IMPORTANT]
> **Important:** Channel guidance is only available for CBSDs located in the continental US.

## Channel quality

The channel quality score is a number between 0 (zero) and 100. The channel
quality varies based on a CBSD's configuration and its surrounding
environment.

> [!IMPORTANT]
> **Important:** If a Customer Premises Equipment (CPE)-CBSD is part of a [Same Frequency Group (SFG)](https://docs.cloud.google.com/spectrum-access-system/docs/key-terms.md.txt#sfg), the SAS ranks the channel as highest, even if the channel is not of the highest quality.

For all CBSDs, channel quality is affected by the following:

- **The maximum EIRP available 24 hours after you request the spectrum grant.**

  To protect incumbents, SAS does not offer full power
  in certain areas.
- **Google's estimate of the interference caused by other CBSDs
  inside and outside your network.**

  Based on configuration and active grants of surrounding CBSDs
  along with terrain and clutter data, the interference estimate takes into
  account all Category A CBSDs within one kilometer and Category
  B CBSDs within 10 kilometers.
- **Interference and SINR estimation by using a generic antenna pattern based on
  the beamwidth information.**

  For CBSDs in a frequency management group, SAS
  assumes that CBSDs in the same [Frequency Reuse Group (FRG)](https://docs.cloud.google.com/spectrum-access-system/docs/key-terms.md.txt#frg)
  don't interfere with each other when they use the same channel.

For fixed wireless networks, SAS assumes the following channel
quality:

- The CPE-CBSDs and Base Station-CBSDs in the same
  sector don't interfere with each other.

- The CPE-CBSDs and Base Station-CBSDs in one
  sector interfere with CPE-CBSDs and Base Station-CBSDs
  in other sectors, unless they're in the same FRG.

## Channel ranking

*Channel ranking* is the list of all available channels for the
CBSD sorted from the highest quality to the lowest.

For fixed wireless networks, SAS assumes the following channel
ranking:

- For a CPE-CBSD that has been specified as an SFG, SAS
  recommends the channels that are used by the Base Station-CBSD in
  the SFG. SAS shows these channels at the top of the list
  regardless of quality scores.

- For a Base Station-CBSD, SAS recommends the
  channels with the highest scores. It might recommend the same channels for all the
  CBSDs in the same FRG.

For mobile networks, SAS recommends the channels with the highest
scores. It might recommend the same channels for all the CBSDs
in the same FRG.

## Check recommended channels for a CBSD

> [!IMPORTANT]
> **Important:** Channel guidance is based on the [state](https://docs.cloud.google.com/spectrum-access-system/docs/cbsd/overview.md.txt#state) of nearby CBSDs. The CBSD state is based on the configuration and active grants of the surrounding CBSDs.

To view the channel recommendation for a CBSD, follow these steps:

1. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas/).
2. Click **View deployments**.
3. Select the deployment, and then click **Open**.
4. In the **Channel recommendations** list, do one of the following:
   - For an existing CBSD, [find your CBSD configurations](https://docs.cloud.google.com/spectrum-access-system/docs/cbsd/review-configuration.md.txt).
   - For a new CBSD, [create a new CBSD configuration](https://docs.cloud.google.com/spectrum-access-system/docs/cbsd/configure.md.txt) and save it as **Ready for CPI**.
5. Select the CBSD. On the right, the CBSD page opens.
6. Click the **Coex** tab. For a new CBSD, wait for four hours to see the **Coex** tab.
7. To review the channels with the highest quality scores, use the channel ranking.

   > [!TIP]
   > **Tip:** The channel ranking lists channels from the highest quality to the lowest.

8. Request a new grant from your CBSD or Domain Proxy (DP) and
   specify the channels that you identified in the previous step. You might have to
   relinquish the previous grant.

   > [!IMPORTANT]
   > **Important:** SAS does not automatically change your CBSD grants to use the recommended channels. You must request the grant from your CBSD or DP.

## What's next

- Understand [CBRS spectrum availability](https://docs.cloud.google.com/spectrum-access-system/docs/cbrs-availability.md.txt).
- Learn [how the CBSD knows what spectrum is available](https://docs.cloud.google.com/spectrum-access-system/docs/cbsd/overview.md.txt#cbsdspectrum-avail).
- Understand [channel guidance for CBSDs in your network](https://docs.cloud.google.com/spectrum-access-system/docs/cbsd/channel-guide.md.txt).
- Learn about [key SAS terms](https://docs.cloud.google.com/spectrum-access-system/docs/key-terms.md.txt).
- [Troubleshoot SAS issues](https://docs.cloud.google.com/spectrum-access-system/docs/troubleshooting.md.txt).