# Prepare to set up Cloud Service Mesh with proxyless gRPC services

Setting up Cloud Service Mesh includes several phases. This document describes the
first phase: instructions for preparing to configure Cloud Service Mesh
with proxyless gRPC applications. This document applies when you are using the
load balancing APIs. However, we strongly recommend that you use the [service routing APIs](https://docs.cloud.google.com/service-mesh/docs/service-routing/service-routing-overview.md.txt). The other phases are covered by the platform-specific
guides listed in [Continue the setup process](https://docs.cloud.google.com/service-mesh/legacy/load-balancing-apis/prepare-proxyless-grpc.md.txt#continue-setup) later in this
document.

Before you read this guide, familiarize yourself with the following documents,
which provide an overview of using Cloud Service Mesh with proxyless gRPC
applications:

- [Cloud Service Mesh overview](https://docs.cloud.google.com/service-mesh/docs/overview.md.txt)
- [Cloud Service Mesh with proxyless gRPC services overview](https://docs.cloud.google.com/service-mesh/docs/proxyless-overview)
- [Cloud Service Mesh new service routing APIs overview](https://docs.cloud.google.com/service-mesh/docs/service-routing-overview)

## Prerequisites

Prepare your environment by completing the following tasks:

1. Enable billing.
2. Grant the required permissions.
3. Enable the Traffic Director API for your project.
4. Ensure that the service account has sufficient permissions to access the Traffic Director API.

The following sections provide instructions for each task.

### Enable billing

Make sure that billing is enabled for your Google Cloud project. For more
information, see
[Enable, disable, or change billing for a project](https://docs.cloud.google.com/billing/docs/how-to/modify-project.md.txt).

### Grant the required IAM permissions

You must have sufficient Identity and Access Management (IAM) permissions to create VM
instances and modify a network to configure Cloud Service Mesh. If you have the
role of project
[Owner or Editor](https://docs.cloud.google.com/iam/docs/roles-overview.md.txt#basic) (`roles/owner` or
`roles/editor`) in the project where you
are enabling Cloud Service Mesh, you automatically have the correct permissions.

Otherwise, you must have all of the IAM
roles shown in the following table. If you have these roles, you also have their
associated permissions, as described in the
[Compute Engine IAM documentation](https://docs.cloud.google.com/compute/docs/access/iam.md.txt).

| Task | Required role |
|---|---|
| Set IAM policy for a service account. | [Service Account Admin](https://docs.cloud.google.com/compute/docs/access/iam.md.txt#iam.serviceAccountAdmin) (`roles/iam.serviceAccountAdmin`) |
| Enable Cloud Service Mesh. | [Service Usage Admin](https://docs.cloud.google.com/iam/docs/roles-permissions/serviceusage.md.txt) (`roles/serviceusage.serviceUsageAdmin`) |
| Create networks, subnets, and load balancer components. | [Compute Network Admin](https://docs.cloud.google.com/compute/docs/access/iam.md.txt#compute.networkAdmin) (`roles/compute.networkAdmin`) |
| Add and remove firewall rules. | [Compute Security Admin](https://docs.cloud.google.com/compute/docs/access/iam.md.txt#compute.securityAdmin) (`roles/compute.securityAdmin`) |
| Create instances. | [Compute Instance Admin](https://docs.cloud.google.com/compute/docs/access/iam.md.txt#compute.instanceAdmin) (`roles/compute.instanceAdmin`) |
| Create and modify a GKE cluster, if using Pods. | [Cluster Admin](https://docs.cloud.google.com/kubernetes-engine/docs/how-to/iam.md.txt#iam_roles) (`roles/container.clusterAdmin`) |
| Allows access to service accounts. | [Service Account User](https://docs.cloud.google.com/iam/docs/service-account-permissions.md.txt#user-role) (`roles/iam.serviceAccountUser` |

The Compute Engine VMs must have the
[`https://www.googleapis.com/auth/cloud-platform`](https://www.googleapis.com/auth/cloud-platform)
scope. For more information, see
[Troubleshooting deployments that use proxyless gRPC](https://docs.cloud.google.com/service-mesh/docs/troubleshooting-proxyless#unable-to-connect-to-traffic-director).

With xDS v3, grant the service account used by Cloud Service Mesh gRPC clients
the role `roles/trafficdirector.client`.

### Enable the Traffic Director API

### Console

1. In the Google Cloud console, go to the **API Library** page for your project.

   [Go to the API Library](https://console.cloud.google.com/project/_/apis/library)
2. In the **Search for APIs \& Services** field, enter `Traffic Director`.

3. In the search results list, click **Traffic Director API**. If you don't see the
   Traffic Director API listed, that means that you don't have the necessary
   permissions to enable the Traffic Director API.

4. On the **Traffic Director API** page, click **Enable**.

### gcloud

Run the following command:

```
gcloud services enable trafficdirector.googleapis.com
```

### Enable the service account to access the Traffic Director API

When you set up your data plane and connect it to Cloud Service Mesh, your
xDS clients connect to the `trafficdirector.googleapis.com` xDS server. These
xDS clients present a service account identity to the xDS server to ensure that
communications between the data plane and the control plane are properly
authorized.

For a Compute Engine VM, the xDS client uses the service account
assigned to the VM.

> [!NOTE]
> **Note:** Unless you modify the configuration, Google Cloud uses the [Compute Engine default service account](https://docs.cloud.google.com/compute/docs/access/service-accounts.md.txt#default_service_account).

You need the following permissions. The xDS protocol version is specified in
the [bootstrap file](https://docs.cloud.google.com/service-mesh/legacy/load-balancing-apis/prepare-proxyless-grpc.md.txt#bootstrap_file). Only xDS v3 is supported.

If you are using xDS v2, you must migrate to xDS v3. For information
about how to migrate, see [Migrate from xDS v2 to xDS v3](https://docs.cloud.google.com/service-mesh/docs/service-routing/xds-control-plane-apis.md.txt#migrate_from_xds_v2_to_xds_v3).

When you use xDS v3, the service account used by your gRPC applications must
have the `trafficdirector.networks.reportMetrics` and
`trafficdirector.networks.getConfigs` permissions. You can use the
IAM [Traffic Director Client role](https://docs.cloud.google.com/iam/docs/roles-permissions/anthosservicemesh.md.txt#trafficdirector.client)
(`roles/trafficdirector.client`), which wraps both permissions.

### Console

1. In the Google Cloud console, go to the **IAM \& Admin**
   page.

   [Go to
   IAM \& Admin](https://console.cloud.google.com/project/_/iam-admin)
2. Select your project.

3. Identify the service account to which you want to add a role:

   - If the service account isn't already on the **Members** list, it doesn't have any roles assigned to it. Click **Add** and enter the email address of the service account.
   - If the service account is already on the **Members** list, it has existing roles. Select the service account, and then click the **Roles** tab.
4. Expand the role. For the service account that you want to edit,
   click **Edit**.

5. Select the **Other \> Cloud Service Mesh Client** role.

6. To apply the role to the service account, click **Save**.

### gcloud

Run the following command:

```
gcloud projects add-iam-policy-binding PROJECT \
    --member serviceAccount:SERVICE_ACCOUNT_EMAIL \
    --role=roles/trafficdirector.client
```

Replace the following:

- `PROJECT`: enter `gcloud config get-value project`
- `SERVICE_ACCOUNT_EMAIL`: the email associated with the service account

Next, follow this overall procedure for setting up proxyless gRPC applications
in a service mesh:

1. Update your gRPC clients to the latest version of gRPC, with the most recent patch.
2. Update your clients' gRPC name resolver scheme when you create a channel and specify a Cloud Service Mesh bootstrap file.
3. Configure Cloud Service Mesh and Cloud Load Balancing resources.

This document provides information for completing the first two steps. The
configuration process that you use for step 3 depends on whether your
deployment uses
[Compute Engine VMs](https://docs.cloud.google.com/service-mesh/legacy/load-balancing-apis/set-up-proxyless-gce.md.txt) or
[GKE network endpoint groups (NEGs)](https://docs.cloud.google.com/service-mesh/legacy/load-balancing-apis/set-up-proxyless-gke.md.txt).

## Supported gRPC versions and languages

gRPC is an open source project and its release support is described on the
[gRPC FAQ](https://grpc.io/docs/what-is-grpc/faq/#how-long-are-grpc-releases-supported-for).
We recommend that you use the most recent version of gRPC to ensure that known
security vulnerabilities are mitigated. This also ensures that your applications
have access to the latest features supported by Cloud Service Mesh. The
service mesh features supported in various implementations and versions of
gRPC are listed on [GitHub](https://github.com/grpc/grpc/blob/master/doc/grpc_xds_features.md).
For a list of gRPC languages and features supported with Cloud Service Mesh and
proxyless gRPC services, see
[Cloud Service Mesh features](https://docs.cloud.google.com/service-mesh/docs/service-routing/features.md.txt).

Cloud Service Mesh maintains compatibility with current and supported versions of
gRPC and endeavors to be compatible with gRPC versions less than one year
old, subject to the [Google Cloud Platform Terms of Service](https://cloud.google.com/terms).

## Update your gRPC clients

Update the gRPC library in your application to the version that supports the
features that you require. For details, see the previous section.

Add the xDS name-resolver as a dependency to your gRPC applications.
Requirements per language for Java and Go are shown in the following sections.
Other languages don't have any additional requirements.

### Java requirements

In Java, if you're using Gradle, add the `grpc-xds` dependency to your
`build.gradle` file. Replace `LATEST_GRPC_VERSION` with the
latest version of
[gRPC](https://github.com/grpc/grpc-java/releases).

```
dependencies {
  runtimeOnly 'io.grpc:grpc-xds:LATEST_GRPC_VERSION'
}
```

If you're using Maven, add the following to the `<dependencies>` section
of pom.xml. Replace `LATEST_GRPC_VERSION` with the
latest version of gRPC.

```
    <dependency>
      <groupId>io.grpc</groupId>
      <artifactId>grpc-xds</artifactId>
      <version>LATEST_GRPC_VERSION</version>
      <scope>runtime</scope>
    </dependency>
```

### Go requirements

If you're using Go, import the [xds Go package](https://pkg.go.dev/google.golang.org/grpc/xds?tab=doc).

## Set gRPC name resolver to use `xds`

Set or change your gRPC applications to use the `xds` name resolution scheme in
the target URI, rather than DNS or any other resolver scheme. You do this by
using the prefix `xds:///` in the target name when you create a gRPC channel.
Load balancing for gRPC clients is on a per-channel basis.

Include the service name used in the target URI in the
Cloud Service Mesh configuration. For example, in Java, you create the
channel by using this structure, in which the service name is `helloworld`:

```
ManagedChannelBuilder.forTarget("xds:///helloworld[:PORT_NUMBER]")
```

## Create and configure a bootstrap file

The `xds` resolver scheme tells the gRPC application to connect to
Cloud Service Mesh to obtain configuration information for the target
service. Therefore, do the following:

- Create a bootstrap file, as shown in the following sample. This file tells gRPC to connect to an xDS server (Cloud Service Mesh) to get the configuration for specific services.
- Define an environment variable named `GRPC_XDS_BOOTSTRAP`, with the bootstrap filename as the value of the environment variable.

The setup instructions have examples that show how to generate the bootstrap file.
For your convenience, you can use the latest version of [Cloud Service Mesh gRPC bootstrap generator](https://github.com/GoogleCloudPlatform/traffic-director-grpc-bootstrap/releases).

A bootstrap file containing the information needed to connect to
Cloud Service Mesh must be included alongside the application. A sample
bootstrap file looks like this:

```
{
  "xds_servers": [
    {
      "server_uri": "trafficdirector.googleapis.com:443",
      "channel_creds": [
        {
          "type": "google_default"
        }
      ],
      "server_features": ["xds_v3"]
    }
  ],
  "node": {
    "id": "projects/123456789012/networks/default/nodes/b7f9c818-fb46-43ca-8662-d3bdbcf7ec18",
    "metadata": {
      "TRAFFICDIRECTOR_NETWORK_NAME": "default"
    },
    "locality": {
      "zone": "us-central1-a"
    }
  }
}
```

The following table explains the fields in the bootstrap file.

| Field | Value and description |
|---|---|
| `xds_servers` | A list of xDS servers. gRPC uses only the first one in the list. |
| `server_uri` | Specify at least one. gRPC tries to connect to only the first xDS server in the list of `xds_servers`. The default value is `trafficdirector.googleapis.com:443`. |
| `channel_creds` | Credentials to use with the xDS server. |
| `type` | Use the value `google_default`. For more information about how credentials are obtained, see [How Application Default Credentials works](https://docs.cloud.google.com/docs/authentication/application-default-credentials.md.txt). |
| `server_features` | A list of features supported by the server, such as [xDS v3 support](https://github.com/grpc/proposal/blob/master/A30-xds-v3.md). The default value is empty. |
| `node` | Information about the client connecting to the xDS server. |
| `id` | The `id` must be in the following format as shown in the preceding example: ``` projects/PROJECT_NUMBER/networks/NETWORK_NAME/nodes/ID ``` Provide a unique string as the value of `ID`. This helps identify the gRPC client that is connecting to Cloud Service Mesh. |
| `metadata` | Information specific to the xDS server. |
| `TRAFFICDIRECTOR_NETWORK_NAME` | If the field is empty or not specified, then the value is set to `default`. |
| `locality` | The Google Cloud zone in which the gRPC client is running. |

## Continue the setup process

After you complete the prerequisites described in this document, continue
with one of these documents:

- Continue with the [Cloud Service Mesh Set up GKE and proxyless gRPC services](https://docs.cloud.google.com/service-mesh/legacy/load-balancing-apis/set-up-proxyless-gke.md.txt)
- Continue with the [Cloud Service Mesh Set up Compute Engine and proxyless gRPC services](https://docs.cloud.google.com/service-mesh/legacy/load-balancing-apis/set-up-proxyless-gce.md.txt)
- Continue with the [Cloud Service Mesh GKE Kubernetes Gateway API setup guides](https://docs.cloud.google.com/service-mesh/docs/gke-gateway-overview). Note that the Gateway API feature is in Preview.