> [!CAUTION]
> **Note:** Cloud Deployment Manager reaches end of support on March 31, 2026. For more information, see [Cloud Deployment Manager deprecation](https://docs.cloud.google.com/deployment-manager/docs/deprecations.md.txt).
>
> To automate the deployment of Google Cloud resources for a
> single-node SAP NetWeaver system on Linux, we recommend that you use
> Terraform. For more information, see
> [Terraform:
> Automated VM deployment for SAP NetWeaver on Linux](https://docs.cloud.google.com/sap/docs/netweaver-deployment-linux-tf).

This guide uses Deployment Manager to deploy all of the
required Google Cloud resources to run SAP NetWeaver on Linux,
including the Compute Engine virtual machine (VM), the Linux
operating system, and the persistent disks. You define the values for the
installation, such as machine type, resource names, disk sizes, and so forth, in
a Deployment Manager configuration file template.

To use Terraform to automate the deployment of Google Cloud resources
to run SAP NetWeaver on Linux,
see [Terraform: Automated VM deployment for SAP NetWeaver on Linux](https://docs.cloud.google.com/sap/docs/netweaver-ha-config-sles-tf.md.txt).

If your SAP NetWeaver installation requires more control over
the deployment process than the Deployment Manager template
provides, see
[Manual VM deployment for SAP NetWeaver on Linux](https://docs.cloud.google.com/sap/docs/netweaver-deployment-linux-manual.md.txt).

To deploy a VM that is running Windows, see the
[Windows deployment guide](https://docs.cloud.google.com/sap/docs/netweaver-deployment-guide-windows.md.txt).

## VM configuration deployed by these instructions

The VM that is deployed by these instructions is for use in a 3-tier
configuration, where SAP NetWeaver runs on one VM and the database server runs
on another.

To set up a 2-tier configuration, where SAP NetWeaver runs on the
same VM as the database server, you deploy the database server first and create
the VM and the required disk drives for both the database server and for SAP
NetWeaver at that time. You then install SAP NetWeaver on the same VM as the
database server.

For instructions about deploying the VM for a database server, see the
[database deployment guide](https://docs.cloud.google.com/sap/docs.md.txt)
for your database server.

## Google Cloud resources deployed by these instructions

The Google Cloud resources that are deployed by
Deployment Manager include:

- A VM that uses an SAP-certified version of Linux.
- A persistent disk for the boot disk.
- A persistent disk for SAP binaries.
- A persistent disk for swap space.
- The recommended APIs.
- Google Cloud's Agent for SAP.

The following instructions use Cloud Shell, but if you prefer, you can use
the Google Cloud CLI in your local terminal instead.

For more details on planning your implementation, see the
[Planning guide](https://docs.cloud.google.com/sap/docs/netweaver-planning-guide.md.txt). For an
overview of IT ops for your system, see the
[Operations guide](https://docs.cloud.google.com/sap/docs/netweaver-operations-guide.md.txt).

## Creating a project


If you require your SAP workload to run in compliance with data residency, access control, support
personnel, or regulatory requirements, then you must create the required
Assured Workloads folder. For more information,
see [Compliance and sovereign controls
for SAP on Google Cloud](https://docs.cloud.google.com/sap/docs/compliance-and-sovereign-controls).

To create a project:

## Configuring the `gcloud` command environment

These instructions use
[Cloud Shell](https://docs.cloud.google.com/shell/docs.md.txt) to enter `gcloud` commands that deploy or configure
your Google Cloud resources. Cloud Shell is accessed through the
Google Cloud console in your browser.

Cloud Shell runs on a VM that Google Cloud provisions each time
you start Cloud Shell. The first time you use Cloud Shell,
Google Cloud also creates a persistent `$HOME` directory for you,
which is restored each time you open Cloud Shell.

The provisioned VM includes the latest
[Google Cloud CLI](https://docs.cloud.google.com/sdk/docs.md.txt).
Therefore, the `gcloud`
commands that you use in Cloud Shell are the same as
those you would use in a locally installed instance of the gcloud CLI.

If you have the gcloud CLI installed, you can issue the `gcloud`
commands that are used in these instructions from your local machine. However,
with a locally installed gcloud CLI you must always make sure that you
are using the latest version of the gcloud CLI.

Whether you use Cloud Shell or gcloud CLI, you
can set and change the properties of your `gcloud` command environment and save
them as a *configuration* . Configurations are collections of key-value pairs
that influence the behavior of the `gcloud` commands.

Some basic actions you can take with a configuration in Cloud Shell
include:

- Initialize a configuration:

  ```
  gcloud init
  ```
- Check the settings of your current gcloud configuration:

  ```
  gcloud config list
  ```
- Switch to the required Google Cloud project. Replace
  `PROJECT_ID` with your Google Cloud project ID.

  ```
  gcloud config set project PROJECT_ID
  ```
- Set a default region. Replace `REGION` with a
  Google Cloud region.

  ```
  gcloud config set compute/region REGION
  ```
- Set a default zone. Replace `ZONE` with a
  Google Cloud zone.

  ```
  gcloud config set compute/zone ZONE
  ```
- Create a new configuration. Replace `NAME` with the name
  for the configuration.

  ```
  gcloud config configurations create NAME
  ```

For more information about working with configurations, see
[Managing gcloud CLI configurations](https://docs.cloud.google.com/sdk/docs/configurations.md.txt).

## Creating a network

For security purposes, create a new network. You can control who has access by
adding firewall rules or by using another access control method.

If your project has a default VPC network, then don't use it.
Instead, create your own VPC network so that the only firewall rules
in effect are those that you create explicitly.

During deployment, Compute Engine instances typically require access to the internet to
download Google Cloud's Agent for SAP. If you are using one of the SAP-certified Linux
images that are available from Google Cloud, then the compute instance also requires access
to the internet in order to register the license and to access OS vendor repositories.
A configuration with a NAT gateway and with VM network tags supports this access, even if the
target compute instances don't have external IPs.

To set up networking:

### Console

1. In the Google Cloud console, go to the **VPC networks** page.

   [Go to VPC networks](https://console.cloud.google.com/networking/networks/list)
2. Click **Create VPC network**.
3. Enter a **Name** for the network.

   The name must adhere to the
   [naming convention](https://docs.cloud.google.com/compute/docs/naming-resources.md.txt#resource-name-format).
   VPC networks use the Compute Engine naming convention.
4. For **Subnet creation mode** , choose **Custom**.
5. In the **New subnet** section, specify the following configuration parameters for a subnet:
   1. Enter a **Name** for the subnet.
   2. For **Region** , select the [Compute Engine region](https://docs.cloud.google.com/compute/docs/regions-zones.md.txt) where you want to create the subnet.
   3. For **IP stack type** , select **IPv4 (single-stack)** and then enter an IP address range in the [CIDR format](https://wikipedia.org/wiki/Classless_Inter-Domain_Routing), such as `10.1.0.0/24`.

      This is the [primary
      IPv4 range](https://docs.cloud.google.com/vpc/docs/vpc#manually_created_subnet_ip_ranges) for the subnet. If you plan to add more than one subnet, then
      assign non-overlapping CIDR IP ranges for each subnetwork in the network.
      Note that each subnetwork and its internal IP ranges are mapped to a single
      region.
   4. Click **Done**.
6. To add more subnets, click **Add subnet** and repeat the preceding steps. You can add more subnets to the network after you have created the network.
7. Click **Create**.

### gcloud

1. Go to Cloud Shell. [Go to Cloud Shell](https://console.cloud.google.com/?cloudshell=true)

2. To create a new network in the custom subnetworks mode, run:

   ```
   gcloud compute networks create NETWORK_NAME --subnet-mode custom
   ```

   Replace `NETWORK_NAME` with the name of the new network. The
   name must adhere to the
   [naming convention](https://docs.cloud.google.com/compute/docs/naming-resources.md.txt#resource-name-format).
   VPC networks use the Compute Engine naming convention.

   Specify `--subnet-mode custom` to avoid using the default auto mode, which
   automatically creates a subnet in each Compute Engine region. For more
   information, see [Subnet creation mode](https://docs.cloud.google.com/vpc/docs/vpc.md.txt#subnet-ranges).
3. Create a subnetwork, and specify the region and IP range:

   ```
   gcloud compute networks subnets create SUBNETWORK_NAME \
       --network NETWORK_NAME --region REGION --range RANGE
   ```

   Replace the following:
   - `SUBNETWORK_NAME`: the name of the new subnetwork
   - `NETWORK_NAME`: the name of the network you created in the previous step
   - `REGION`: the [region](https://docs.cloud.google.com/compute/docs/regions-zones.md.txt) where you want the subnetwork
   - `RANGE`: the IP address range, [specified in CIDR format](https://wikipedia.org/wiki/Classless_Inter-Domain_Routing), such as `10.1.0.0/24`

     If you plan to add more than one subnetwork, assign
     non-overlapping CIDR IP ranges for each subnetwork in the network. Note that
     each subnetwork and its internal IP ranges are mapped to a single region.
4. Optionally, repeat the previous step and add additional subnetworks.

## Setting up a NAT gateway

If you need to create one or more compute instances without public IP addresses, then you need to use network
address translation (NAT) to enable the instances to access the internet. Use Cloud NAT, a
Google Cloud distributed, software-defined managed service that lets the compute instances send outbound
packets to the internet and receive any corresponding established inbound response packets.
Alternatively, you can set up a separate compute instance as a NAT gateway.

> [!IMPORTANT]
> **Key Point:** When you configure Cloud NAT, specify at least 160 as the minimum number of ports per compute instance. Certain operating system updates run concurrent processes that might exceed the Cloud NAT default for the number of ports, which can result in activation or download errors.
>
> When you create a Cloud NAT instance, specify the number of ports in the **Minimum
> ports per VM** field under **Advanced configurations** on the Create a NAT gateway page in the
> Google Cloud console.

To create a Cloud NAT instance for your project, see
[Using Cloud NAT](https://docs.cloud.google.com/nat/docs/set-up-network-address-translation).

After you configure Cloud NAT for your project, your compute instances can
securely access the internet without a public IP address.

## Adding firewall rules

By default, incoming connections from outside your Google Cloud network
are blocked. To allow incoming connections, set up a firewall rule for your VM.
Firewall rules regulate only new incoming connections to a VM. After a
connection is established with a VM, traffic is permitted in both directions
over that connection.

You can create a firewall rule to allow access to specified ports, or to allow
access between VMs on the same subnetwork.

Create firewall rules to allow access for such things as:

- The default ports used by SAP NetWeaver, as documented in [TCP/IP Ports of All SAP Products](https://help.sap.com/viewer/575a9f0e56f34c6e8138439eefc32b16/2.0/en-US/616a3c0b1cc748238de9c0341b15c63c.html).
- Connections from your computer or your corporate network environment to your Compute Engine VM instance. If you are unsure of what IP address to use, talk to your company's network admin.
- Communication between VMs in a 3-tier, scaleout, or high-availability configuration. For example, if you are deploying a 3-tier system, you will have at least 2 VMs in your subnetwork: the VM for SAP NetWeaver, and another VM for the database server. To enable communication between the two VMs, you must create a firewall rule to allow traffic that originates from the subnetwork.
- SSH connections to your VM instance, including [SSH from the browser](https://docs.cloud.google.com/compute/docs/ssh-in-browser), through port `22`.
- Connections to your VM instance from third-party tools, such as a local terminal or PuTTY. Create a rule to allow access for the tool through your firewall. For more information, see [Connect to Linux VMs using third-party tools](https://docs.cloud.google.com/compute/docs/connect/ssh-using-third-party-tools).

> [!NOTE]
> **Note:** The following procedure is a simplified version of the instructions for creating firewall rules. For more detailed instructions, see the [Virtual Private Cloud documentation](https://docs.cloud.google.com/vpc/docs/using-firewalls#creating_firewall_rules).

To create a firewall rule:

1. In the Google Cloud console, go to the VPC network **Firewall** page.

   [Go to Firewall](https://console.cloud.google.com/networking/firewalls/list)
2. At the top of the page, click **Create firewall rule**.

   - In the **Network** field, select the network where your VM is located.
   - In the **Targets** field, select **All instances in the network**.
   - In the **Source filter** field, select one of the following:
     - **IP ranges** to allow incoming traffic from specific IP addresses. Specify the range of IP addresses in the **Source IP
       ranges** field.
     - **Subnets** to allow incoming traffic from a particular subnetwork. Specify the subnetwork name in the following **subnets** field. You can use this option to allow access between the VMs in a 3-tier or scaleout configuration.
   - In the **Protocols and ports** section, select **Specified protocols and
     ports** and specify `tcp:PORT_NUMBER;`.
3. Click **Create** to create your firewall rule.

## Deploying a Linux VM for SAP NetWeaver with Deployment Manager

The following instructions use Google Cloud console, Cloud Shell, and
Deployment Manager to deploy a VM instance with Linux and all of
the persistent disks that SAP NetWeaver requires.
To avoid unintentionally exposing your VM instance to the internet, follow these recommendations:

- Use a NAT gateway.
- [Create firewall rules](https://docs.cloud.google.com/vpc/docs/using-firewalls#creating_firewall_rules) that block all external access that you don't require.
- When you create your VMs:
  - Specify a network tag for each VM for use in routing and firewall rules. If you use the Deployment Manager template that Google Cloud provides, specify a tag with `networkTag: [TAG]`.
  - Create the VMs without an external IP. If you use the Deployment Manager templates that Google Cloud provides, specify `publicIP: No`.

### About Deployment Manager

In these instructions, you define the resource options for your installation
in a Deployment Manager configuration file template.

Deployment Manager treats all of the resources that are created
for your SAP system as a single entity called a *deployment* . You can view and
work with all of the deployments for your project on the
[Deployments](https://console.cloud.google.com/dm/deployments)
page in the Google Cloud console.

Be aware of the following behaviors when using
Deployment Manager:

- Deleting a deployment deletes all of the resources associated with the deployment, including the VMs, the persistent disks, and any SAP systems that are installed on the VM.
- By default, Deployment Manager uses the `ACQUIRE` resource
  creation policy. If you specify a VM name that is already in use by another VM
  in your project, Deployment Manager doesn't create a new VM,
  but instead adds the existing VM to your new deployment. If your original VM
  was created by a previous run of Deployment Manager, the VM
  is associated with two deployments.

  If you then delete the new deployment, the acquired VM is
  deleted from the deployment that originally created it. To avoid such a
  scenario, either set the Deployment Manager resource policy
  to `CREATE`, or make sure that you use unique resource names in your new
  deployment.

  For information about the policies you can use while creating resources
  with Deployment Manager and how to specify them, see the
  [Deployment Manager documentation](https://docs.cloud.google.com/deployment-manager/docs/deployments.md.txt#create-policy).

### Deployment procedure

1. Open Cloud Shell.

   [Go to Cloud Shell](https://console.cloud.google.com/?cloudshell=true)
2. Download the `template.yaml` configuration file template to your working
   directory:

   <br />

   ```
   wget https://storage.googleapis.com/cloudsapdeploy/deploymentmanager/latest/dm-templates/sap_nw/template.yaml
   ```

   <br />

3. Optionally, rename the `template.yaml` file to identify the configuration it
   defines. For example, `nw-sles12sp3.yaml`.

4. To open the `template.yaml` file in Cloud Shell code editor, click
   the pencil () icon in the
   upper right corner of Cloud Shell terminal window to launch the
   editor.

5. In the `template.yaml` file, update the following property values by
   replacing the brackets and their contents with the values for your
   installation.

   | Property | Data type | Description |
   |---|---|---|
   | type | String | Specifies the location, type, and version of the Deployment Manager template to use during deployment. The YAML file includes two `type` specifications, one of which is commented out. The `type` specification that is active by default specifies the template version as `latest`. The `type` specification that is commented out specifies a specific template version with a timestamp. If you need all of your deployments to use the same template version, use the `type` specification that includes the timestamp. |
   | `instanceName` | String | The name of the VM instance on which SAP NetWeaver will be installed. The name must be 13 characters or less and be specified in lowercase letters, numbers, or hyphens. Use a name that is unique within your project. |
   | `instanceType` | String | The type of Compute Engine virtual machine that you need. If you need a custom VM type, specify a small [predefined VM type](https://docs.cloud.google.com/sap/docs/netweaver-planning-guide.md.txt#machine_types) and, after deployment is complete, [customize the VM](https://docs.cloud.google.com/sap/docs/modifying_vm_configurations.md.txt) as needed. |
   | `zone` | String | The zone in which you are deploying your SAP NetWeaver. It must be in the same region that you selected for your subnetwork. |
   | `subnetwork` | String | The name of the subnetwork that you created in a previous step. If you are deploying to a shared VPC, specify this value as `[SHAREDVPC_PROJECT]/[SUBNETWORK]`. For example, `myproject/network1`. |
   | `linuxImage` | String | The name of the Linux operating-system image or image family that you are using with SAP NetWeaver. To specify an image family, add the prefix `family/` to the family name. For example, `family/rhel-7-sap-hana`. For the list of available image families, see the [Images](https://console.cloud.google.com/compute/images) page in the Google Cloud console. |
   | `linuxImageProject` | String | The Google Cloud project that contains the image you are going to use. This project might be your own project or a Google Cloud image project, such as `rhel-sap-cloud` or `suse-sap-cloud`. For a list of Google Cloud image projects, see the [Images](https://docs.cloud.google.com/compute/docs/images.md.txt) page in the Compute Engine documentation. |
   | `usrsapSize` | Integer | The size of the \`/usr/sap\` disk. The minimum size is 8 GB. |
   | `sapmntSize` | Integer | The size of the \`/sapmnt\` disk. The minimum size is 8 GB. |
   | `swapSize` | Integer | The size of the swap volume. The minimum size is 1 GB. |
   | `networkTag` | String | Optional. A network tag that represents your VM instance for firewall or routing purposes. If you specify \`publicIP: No\` and do not specify a network tag, be sure to provide another means of access to the internet. |
   | `publicIP` | Boolean | Optional. Determines whether a public IP address is added to your VM instance. The default is `Yes`. > [!NOTE] > **Note** : Do not specify `No` unless you have a NAT gateway configured with a network tag defined for the VM or you have provided the VM with another route to the internet. If there is no route to the internet, the installation fails. |
   | `sap_deployment_debug` | Boolean | Optional. If this value is set to `Yes`, the deployment generates verbose deployment logs. Do not turn this setting on unless a Google support engineer asks you to enable debugging. |

   The following configuration file creates a VM that is
   configured to run SAP NetWeaver. The
   configuration file directs Deployment Manager to deploy
   the `n1-standard-16` VM that is running a SLES 12 SP2 operating system.
   The VM includes all of the directories that are required in order to run
   SAP NetWeaver.

   ```
   resources:
   - name: sap_nw
     type: https://storage.googleapis.com/cloudsapdeploy/deploymentmanager/latest/dm-templates/sap_nw/sap_nw.py
     #
     # By default, this configuration file uses the latest release of the deployment
     # scripts for SAP on Google Cloud.  To fix your deployments to a specific release
     # of the scripts, comment out the type property above and uncomment the type property below.
     #
     # type: https://storage.googleapis.com/cloudsapdeploy/deploymentmanager/202103310846/dm-templates/sap_nw/sap_nw.py
     properties:
       instanceName: ex-vm-nw-lin
       instanceType: n1-standard-16
       zone: us-central1-f
       subnetwork: example-sub-network-sap
       linuxImage: family/sles-12-sp2-sap
       linuxImageProject: suse-sap-cloud
       usrsapSize: 15
       sapmntSize: 15
       swapSize: 24
   ```
6. Create the VM instance:

   ```
   gcloud deployment-manager deployments create [DEPLOYMENT_NAME] --config [TEMPLATE_NAME].yaml
   ```

   where:
   - `[DEPLOYMENT_NAME]` represents the name of your deployment.
   - `[TEMPLATE_NAME]` represents the name of your `template.yaml` file.

   The preceding command invokes the Deployment Manager, which
   deploys the VM according to the specifications in your `template.yaml`
   file. The process may take a few minutes. To check the progress of your
   deployment, follow the steps in the next section.
7. After the VM instance deploys, if you need Compute Engine to
   save the boot disk in the event the VM instance is deleted:

   1. In the Google Cloud console, go to the **VM Instances** page.

      [Go to the VM Instances page](https://console.cloud.google.com/compute/instances)
   2. To open the **VM instance details** page for your VM instance, click
      the name of the VM instance.

   3. Under **Boot disk and local disks** , clear the **Delete boot disk when
      instance is deleted** checkbox.

### Verifying deployment

To verify deployment, you check the deployment logs in Cloud Logging and
check the configuration of the VM.

#### Check the logs

1. In the Google Cloud console, open Cloud Logging to monitor installation
   progress and check for errors.

   > [!NOTE]
   > **Note:** You might incur costs when completing this step in Cloud Logging. For more information, see [Cloud Logging pricing](https://cloud.google.com/stackdriver/pricing).

   [Go to Cloud Logging](https://console.cloud.google.com/logs/query)
2. Filter the logs:

   1. In the **Logs Explorer** page, go to the **Query** pane.

   2. From the **Resource** drop-down menu, select **Global** , and then click
      **Add**.

      If you don't see the **Global** option, then in the query editor, enter
      the following query:

          resource.type="global"
          "Deployment"

   3. Click **Run query**.

3. Analyze the filtered logs:

   - If `"--- Finished"` is displayed, then the deployment processing is complete and you can proceed to the next step.
   - If you see a quota error:

     1. On the IAM \& Admin
        [Quotas](https://console.cloud.google.com/iam-admin/quotas)
        page, increase any of your quotas that do not meet the
        SAP NetWeaver requirements that are listed in the

        [SAP NetWeaver planning guide](https://docs.cloud.google.com/sap/docs/netweaver-planning-guide.md.txt#pricing-and-quotas).


     2. On the Deployment Manager
        [Deployments](https://console.cloud.google.com/dm/deployments)
        page, delete the deployment to clean up the VMs and persistent
        disks from the failed installation.

     3. Rerun your deployment.

#### Check the configuration of the VM

1. After the VM instance deploys, connect to your VM by using `ssh`.

   1. If you haven't already done so, [create a firewall rule](https://docs.cloud.google.com/sap/docs/netweaver-deployment-linux-dm.md.txt#adding_firewall_rules) to allow an SSH connection on port `22`.
   2. Go to the **VM Instances** page.

      [Go to VM instances](https://console.cloud.google.com/compute/instances)
   3. Click **SSH** for your VM instance, or you can use your
      preferred SSH method.

      ![SSH button on Compute Engine VM instances page.](https://docs.cloud.google.com/static/sap/docs/images/netweaver-ssh-button.png)
2. Change to the root user.

   ```sh
   sudo su -
   ```
3. At the command prompt, enter `df -h`. Ensure that you see output similar to
   the following.

   ![Data volumes created by the script.](https://docs.cloud.google.com/static/sap/docs/images/netweaver-data-volumes-linux.png)
4. Confirm that the swap directory was created:

   <br />

   ```sh
   cat /proc/meminfo | grep Swap
   ```

   <br />

   You see results similar to the following example:

   ![Example of terminal output when the swap directory exits.](https://docs.cloud.google.com/static/sap/docs/images/netweaver-swap-verify-linux.png)
5. If you are using RHEL for SAP 9.0 or later, then make sure that the packages
   `chkconfig` and `compat-openssl11` are installed on your VM instance.

   For more information from SAP, see the SAP note
   [3108316 - Red Hat Enterprise Linux 9.x:
   Installation and Configuration](https://me.sap.com/notes/3108316).

If any of the validation steps show that the installation failed:

1. Correct the error.
2. On the [Deployments](https://console.cloud.google.com/dm/deployments) page, delete the deployment to clean up the VMs and persistent disks from the failed installation.
3. Rerun your deployment.

### Connecting to your VM

If you have [defined a firewall rule](https://docs.cloud.google.com/sap/docs/netweaver-deployment-linux-dm.md.txt#adding_firewall_rules) that allows access
on port `22`, you can connect to a Linux VM using common SSH tools.

Google Cloud provides two connection methods. You can connect through the
Google Cloud console or you can connect from a terminal by using a `gcloud`
command.

### Console

To connect by using `ssh` directly from your browser in the
[Google Cloud console](https://console.cloud.google.com/):


1. In the Google Cloud console, go to the **VM instances** page.

   [Go to VM instances](https://console.cloud.google.com/compute/instances)
2. In the list of virtual machine instances, click **SSH** in the row of the instance that you want to connect to.

   ![SSH button next to instance name.](https://docs.cloud.google.com/static/docs/images/establish-ssh-connection-1.png)

<br />

### gcloud

The Google Cloud CLI manages your SSH keys for you by generating
and applying new project-wide SSH keys when you need them.

Connect to your Compute Engine instance:

```
gcloud compute ssh --project="PROJECT_ID" --zone="ZONE" "INSTANCE_NAME"
```

where:

- `PROJECT_ID`: the ID of the Google Cloud project in which you've deployed your compute instance
- `ZONE`: the [zone](https://docs.cloud.google.com/compute/docs/regions-zones.md.txt) in which you've deployed your compute instance
- `INSTANCE_NAME`: the name of your compute instance

After you run this command, the terminal is connected to your
compute instance on Google Cloud and you can run commands on it. When
you are done, use the `exit` command to disconnect from the compute instance.

> [!NOTE]
> **Note:** New compute instances can take some time to boot up before an SSH connection is established. If you fail to connect to a new instance, retry after a few minutes.

You can also generate a new key-pair for your Linux instance and apply it to your
project, which lets you connect to it by using third-party tools such as
[PuTTY on Windows workstations](https://docs.cloud.google.com/compute/docs/connect/ssh-using-third-party-tools).
For more details, see
[Create SSH keys](https://docs.cloud.google.com/compute/docs/connect/create-ssh-keys.md.txt).

Other connection options, which aren't discussed here, are also possible.

For more detailed information about connecting to a Linux VM on
Google Cloud, see [Connecting to Linux instances](https://docs.cloud.google.com/compute/docs/instances/connecting-to-instance#gcetools).

## Setting up the database

If you haven't yet deployed your database on Google Cloud, then follow the
instructions for setting up your database in both the Google Cloud
deployment guide for your database, and in the database documentation that is
provided by your database vendor.

Google Cloud provides deployment guides for the following SAP-certified
databases:

- [SAP HANA guides](https://docs.cloud.google.com/sap/docs/sap-hana-guides.md.txt)
- [SAP ASE guides](https://docs.cloud.google.com/sap/docs/sap-ase-guides.md.txt)
- [SAP MaxDB guides](https://docs.cloud.google.com/sap/docs/sap-maxdb-guides.md.txt)
- [IBM Db2 guides](https://docs.cloud.google.com/sap/docs/sap-ibm-db2-guides.md.txt)
- [Oracle Database guides](https://docs.cloud.google.com/sap/docs/oracle-all-guides.md.txt). To run an Oracle Database with SAP NetWeaver, you must use an SAP-certified version of Oracle Linux. Also, all components of your SAP system must run the same Oracle Linux version. This includes the database, app servers, and any other closely-coupled auxiliary system.
- [Windows SQL Server guide](https://docs.cloud.google.com/compute/docs/instances/sql-server/creating-sql-server-instances.md.txt): when SAP NetWeaver is running on Linux, Windows SQL Server is supported only in 3-tier architectures.

When SAP NetWeaver and the database server are running on different compute
instances in a 3-tier architecture, make sure that your firewall rules are
defined to allow communication between the instances.

## Installing the Cloud Logging agent

The Cloud Logging agent provides you with a solution for Google Cloud
system-activity logging, including operating system events and, if you are using
SAP HANA, SAP HANA events. The Cloud Logging agent is an optional but
recommended component. See the
[SAP NetWeaver on Google Cloud operations guide](https://docs.cloud.google.com/sap/docs/netweaver-operations-guide.md.txt#use_stackdriver_logging)
for more information about Google Cloud logging.

To install the Cloud Logging agent in your new VM, see the instructions
for Linux and Windows in [Installing the agent](https://docs.cloud.google.com/logging/docs/agent/installation#joint-install).

## Installing SAP NetWeaver

For instructions on installing SAP NetWeaver on your new VM, see
[the SAP help portal](https://help.sap.com/viewer/p/SAP_NETWEAVER_750)
and the [SAP NetWeaver Master Guide](https://help.sap.com/doc/18cb1a50b9924bc3b94c2988cc8c51d9/7.5/en-US/mg_nw_75.pdf).

> [!IMPORTANT]
> **Important:** The Software Provisioning Manager (SWPM) chooses the disk drive with the most free space as an installation suggestion for each component. On Google Cloud, it's important that you don't accept the defaults. Be sure to assign the disks to their proper roles in the SWPM dialog boxes.

After you install SAP NetWeaver:

1. Update the SAP kernel to the minimum supported patch level.

   For details on the
   supported SAP kernel patch levels, see

   SAP note
   [2446441 -
   Linux on Google Cloud Platform (IaaS): Adaption of your SAP License](https://me.sap.com/notes/2446441).
2. Install your permanent SAP NetWeaver license.

   For more information from SAP about managing your SAP NetWeaver licenses,
   see [SAP Licensing Procedure](https://help.sap.com/viewer/0643d547dfad4ce497bd7da1264fce77/7.5.6/en-US/fbde4502adef496988fe13d459d66b8b.html).

### Installing the SAP Host Agent

The SAP Host Agent has been enhanced for running on Google Cloud. Ensure
that you run at least the minimum SAP Host Agent version required for the
Google Cloud environment.

For more information, see the following SAP note
[2460297 - SAP on Linux on Google Cloud Platform: Enhanced Monitoring](https://me.sap.com/notes/2460297).

To update your SAP Host Agent by default on a regular basis, see the SAP note
[1473974 - Using the SAP Host Agent Auto Upgrade Feature](https://me.sap.com/notes/1473974).

## Validate your installation of Google Cloud's Agent for SAP

After you have deployed a VM and installed your SAP system, validate that
Google Cloud's Agent for SAP is functioning properly.

### Verify that Google Cloud's Agent for SAP is running

To verify that the agent is running, follow these steps:


1. Establish an SSH connection with your

   Compute Engine instance.

2. Run the following command:

   ```
   systemctl status google-cloud-sap-agent
   ```

   <br />

   If the agent is functioning properly, then the output
   contains `active (running)`. For example:

   ```
   google-cloud-sap-agent.service - Google Cloud Agent for SAP
   Loaded: loaded (/usr/lib/systemd/system/google-cloud-sap-agent.service; enabled; vendor preset: disabled)
   Active:  active (running)  since Fri 2022-12-02 07:21:42 UTC; 4 days ago
   Main PID: 1337673 (google-cloud-sa)
   Tasks: 9 (limit: 100427)
   Memory: 22.4 M (max: 1.0G limit: 1.0G)
   CGroup: /system.slice/google-cloud-sap-agent.service
          └─1337673 /usr/bin/google-cloud-sap-agent
   ```

   <br />

   <br />

<br />


<br />

If the agent isn't running, then [restart the agent](https://docs.cloud.google.com/sap/docs/agent-for-sap/latest/operations.md.txt#agent4sap-restart).

<br />

### Verify that SAP Host Agent is receiving metrics


To verify that the infrastructure metrics are collected by
Google Cloud's Agent for SAP and sent correctly to the SAP Host Agent,
follow these steps:

1. In your SAP system, enter transaction `ST06`.
2. In the overview pane, check the availability and content of the
   following fields for the correct end-to-end setup of the SAP and Google
   monitoring infrastructure:

   - **Cloud Provider** : `Google Cloud Platform`
   - **Enhanced Monitoring Access** : `TRUE`
   - **Enhanced Monitoring Details** : `ACTIVE`

<br />

## Troubleshooting

This section contains information about how to correct common issues.

### Troubleshooting communication problems to the database server

If you are setting up a 3-tier SAP system and having connection issues between
your VMs, ensure that you have [created a firewall rule](https://docs.cloud.google.com/sap/docs/netweaver-deployment-linux-dm.md.txt#adding_firewall_rules)
to allow traffic between VMs on your subnetwork.

### Troubleshooting connecting to your VM

If you are having issues connecting to your VM through `ssh`, ensure that you
have created a firewall rule to open port `22` on the Google Cloud network
you are using.

For other possible issues, see
[Known issues](https://docs.cloud.google.com/compute/docs/ssh-in-browser#known_issues)
for SSH from the browser.


### Troubleshooting Google Cloud's Agent for SAP

To troubleshoot Google Cloud's Agent for SAP, see the
[Google Cloud's Agent for SAP troubleshooting guide](https://docs.cloud.google.com/sap/docs/agent-for-sap/latest/troubleshooting.md.txt).