This page provides guidance for configuring Google Cloud firewall
rules and your peer network firewall rules.

When you configure Cloud VPN tunnels to connect to your peer network,
review and modify firewall rules in your Google Cloud and peer networks
to make sure that they meet your needs. If your peer network is another
Virtual Private Cloud (VPC) network, then configure Google Cloud firewall
rules for both sides of the network connection.

> [!NOTE]
> **Note:** If your Cloud VPN tunnel uses [dynamic (BGP) routing](https://docs.cloud.google.com/network-connectivity/docs/vpn/concepts/choosing-networks-routing#dynamic-routing), make sure that your on-premises network and VPN gateway [allow BGP traffic](https://docs.cloud.google.com/network-connectivity/docs/vpn/how-to/configuring-firewall-rules#dynamic-rules) so that route information can be exchanged.

For more information about Cloud VPN, see the following resources:

- For best practices to consider before setting up Cloud VPN, see
  [Best practices](https://docs.cloud.google.com/network-connectivity/docs/vpn/concepts/best-practices).

- For more information about Cloud VPN, see the
  [Cloud VPN overview](https://docs.cloud.google.com/network-connectivity/docs/vpn/concepts/overview).

- For definitions of terms used on this page, see
  [Key terms](https://docs.cloud.google.com/network-connectivity/docs/vpn/concepts/key-terms).

## Google Cloud firewall rules

Google Cloud firewall rules apply to packets sent to and
from virtual machine (VM) instances within your VPC network
and through Cloud VPN tunnels.

The [implied allow egress](https://docs.cloud.google.com/vpc/docs/firewalls#default_firewall_rules) rules
allow VM instances and other resources in your Google Cloud network to
make outgoing requests and receive established responses. However, the
[implied deny ingress](https://docs.cloud.google.com/vpc/docs/firewalls#default_firewall_rules) rule blocks
all incoming traffic to your Google Cloud resources.

At a minimum, create firewall rules to allow ingress traffic from
your peer network to Google Cloud. If you created egress rules to
*deny* certain types of traffic, you might also need to create other egress
rules.

Traffic containing the protocols UDP 500, UDP 4500, and ESP
(IPsec, IP protocol 50) is always allowed to and from one or more external IP
addresses on a Cloud VPN gateway. However, Google Cloud firewall
rules do *not* apply to the
[post-encapsulated IPsec packets](https://wikipedia.org/wiki/IP_in_IP)
that are sent from a Cloud VPN gateway to a peer VPN gateway.

For more information about Google Cloud firewall rules, see the
[VPC firewall rules overview](https://docs.cloud.google.com/vpc/docs/firewalls).

### Example configurations

For multiple examples of restricting ingress or egress traffic, see the
[configuration examples](https://docs.cloud.google.com/vpc/docs/using-firewalls#configuration_examples)
in the VPC documentation.

The following example creates an *ingress allow* firewall rule. This rule
permits all TCP, UDP, and ICMP traffic from your peer network's CIDR to your
VMs in your VPC network.

#### Permissions required for this task

To perform this task, you must have been granted the following permissions
*or* the following IAM roles.

**Roles**

- [`roles/compute.securityAdmin`](https://docs.cloud.google.com/compute/docs/access/iam#compute.securityAdmin)

### Console

1. In the Google Cloud console, go to the **VPN tunnels** page.

   [Go to VPN tunnels](https://console.cloud.google.com/vpn/list?tab=tunnels)
2. Click the VPN tunnel that you want to use.

3. In the **VPN gateway** section, click the name of the VPC
   network. This action directs you to the **VPC network details** page that
   contains the tunnel.

4. Click the **Firewall rules** tab.

5. Click **Add firewall rule**. Add a rule for TCP, UDP, and ICMP:

   - **Name:** Enter `allow-tcp-udp-icmp`.
   - **Source filter:** Select **IPv4 ranges**.
   - **Source IP ranges:** Enter a **Remote network IP range** value from when you created the tunnel. If you have more than one peer network range, enter each one. Press the **Tab** key between entries. To allow traffic from all source IPv4 addresses in your peer network, specify `0.0.0.0/0`.
   - **Specified protocols or ports:** Select `tcp` and `udp`.
   - **Other protocols:** Enter `icmp`.
   - **Target tags:** Add any valid tag or tags.
6. Click **Create**.

If you need to allow access to IPv6 addresses on your VPC network from your peer network, add an `allow-ipv6-tcp-udp-icmpv6` firewall rule.

1. Click **Add firewall rule** . Add a rule for TCP, UDP, and ICMPv6:
   - **Name:** Enter `allow-ipv6-tcp-udp-icmpv6`.
   - **Source filter:** Select **IPv6 ranges**.
   - **Source IP ranges:** Enter a **Remote network IP range** value from when you created the tunnel. If you have more than one peer network range, enter each one. Press the **Tab** key between entries. To allow traffic from all source IPv6 addresses in your peer network, specify `::/0`.
   - **Specified protocols or ports:** Select `tcp` and `udp`.
   - **Other protocols** : Enter `58`. 58 is the protocol number for ICMPv6.
   - **Target tags:** Add any valid tag or tags.
2. Click **Create**.

Create other firewall rules if necessary.

Alternatively, you can create rules from the Google Cloud console
**Firewall** page.

### gcloud

Run the following command:

```
gcloud  compute --project PROJECT_ID firewall-rules create allow-tcp-udp-icmp \
    --network NETWORK \
    --allow tcp,udp,icmp \
    --source-ranges IPV4_PEER_SOURCE_RANGE
```

Replace `IPV4_PEER_SOURCE_RANGE` with source IPv4 ranges from your peer network.

If you have more than one peer network range, provide a comma-separated
list in the source-ranges field
(`--source-ranges 192.168.1.0/24,192.168.2.0/24`).

To allow traffic from all source IPv4 addresses in your peer network, specify `0.0.0.0/0`.

**IPv6 firewall rules**

If you need to allow access to IPv6 addresses on your VPC network from your peer network, add an `allow-ipv6-tcp-udp-icmpv6` firewall rule.

```
gcloud  compute --project PROJECT_ID firewall-rules create allow-ipv6-tcp-udp-icmpv6 \
    --network NETWORK \
    --allow tcp,udp,58 \
    --source-ranges IPV6_PEER_SOURCE_RANGE
```

58 is the protocol number for ICMPv6.

Replace `PEER_SOURCE_RANGE` with source IPv6 ranges from your peer network.
If you have more than one peer network range, provide a comma-separated
list in the source-ranges field
(`--source-ranges 2001:db8:aa::/64,2001:db8:bb::/64`).

To allow traffic from all source IPv6 addresses in your peer network, specify `::/0`.

**Other firewall rules**

Create other firewall rules if necessary.

For more information about the `firewall-rules` command, see the
[`gcloud` firewall rules](https://docs.cloud.google.com/sdk/gcloud/reference/compute/firewall-rules)
documentation.

## Peer firewall rules

When configuring your peer firewall rules, consider the following:

- Configure rules to allow egress and ingress traffic to and from the IP ranges used by the subnets in your VPC network.
- You can choose to permit all protocols and ports, or you can restrict traffic to only the necessary set of protocols and ports to meet your needs.
- Allow ICMP traffic if you need to use `ping` to be able to communicate among peer systems and instances or resources in Google Cloud.
- If you need to access IPv6 addresses on your peer network with `ping`, allow ICMPv6 (IP protocol 58) in your peer firewall.
- Both your network devices (security appliances, firewall devices, switches, routers, and gateways) and software running on your systems (such as firewall software included with an operating system) can implement on-premises firewall rules. To allow traffic, configure all firewall rules in the path to your VPC network appropriately.
- If your VPN tunnel uses dynamic (BGP) routing, make sure that you allow BGP traffic for the link-local IP addresses. For more details, see the next section.

### BGP considerations for peer gateways

Dynamic (BGP) routing exchanges route information by using TCP port 179. Some VPN
gateways, including Cloud VPN gateways, allow this traffic automatically
when you choose dynamic routing. If your peer VPN gateway does not,
configure it to allow incoming and outgoing traffic on TCP port 179. All BGP
IP addresses use the link-local `169.254.0.0/16` CIDR block.

If your peer VPN gateway is not directly connected to the internet, make
sure that it and peer routers, firewall rules, and security appliances are
configured to at least pass BGP traffic (TCP port 179) and ICMP traffic to your
VPN gateway. ICMP is not required, but it is useful to test connectivity between
a Cloud Router and your VPN gateway. The range of IP addresses to which
your peer firewall rule should apply must include the BGP IP addresses of the
Cloud Router and your gateway.

## What's next

- To make sure components are communicating correctly with Cloud VPN, see [Check VPN status](https://docs.cloud.google.com/network-connectivity/docs/vpn/how-to/checking-vpn-status).
- To use high-availability and high-throughput scenarios or multiple subnet scenarios, see [Advanced configurations](https://docs.cloud.google.com/network-connectivity/docs/vpn/concepts/advanced).
- To help you solve common issues that you might encounter when using Cloud VPN, see [Troubleshooting](https://docs.cloud.google.com/network-connectivity/docs/vpn/support/troubleshooting).