Create an NCC Gateway spoke

Preview

This feature is subject to the "Pre-GA Offerings Terms" in the General Service Terms section of the Service Specific Terms. Pre-GA features are available "as is" and might have limited support. For more information, see the launch stage descriptions.

This page describes how to create an NCC Gateway spoke resource in a specified region connected to the Network Connectivity Center hub.

gcloud

Use the gcloud beta network-connectivity spokes gateways create command:

gcloud beta network-connectivity spokes gateways create SPOKE_NAME \
    --region=REGION \
    --hub=HUB \
    --capacity=CAPACITY \
    --ip-range-reservations=IP_RANGE \
    --group=gateways

Replace the following:

• SPOKE_NAME: the name of the spoke
• REGION: the region that you want the NCC Gateway to be deployed in
• HUB: the name of the hub for the spoke

• CAPACITY: the capacity of the gateway spoke, in Gbps

  Supported capacity values are 1, 10, or 100.

• IP_RANGE: a block of IP address ranges used to allocate supporting infrastructure for this gateway—for example, 10.1.2.0/23

  The IP address block must be a /23 range. This IP address block must not overlap with subnets in any spoke or peer network that the gateway can communicate with.

  Note: You can't change assigned IP address ranges. Some IP address ranges are reserved for SSE partners.

API

To create an NCC Gateway spoke, use the projects.locations.spokes.create method.

  POST https://networkconnectivity.googleapis.com/v1beta/projects/PROJECT_ID/locations/global/spokes/SPOKE_NAME
  {
    "hub":"HUB_NAME",
    "location" : LOCATION,
    "gateway": {
       "ip_range_reservation": IP_RANGE,
       "capacity": CAPACITY
       "group": gateways
    },
  }

Replace the following values:

• PROJECT_ID: the project ID of the project that contains the new spoke
• SPOKE_NAME: the name of the spoke
• HUB_NAME: the name of the hub that you are attaching the spoke to
• LOCATION: the region that you want the NCC Gateway to be deployed in

• IP_RANGE: a block of IP address ranges used to allocate supporting infrastructure for this gateway—for example, 10.1.2.0/23

  The IP address block must be a /23 range. This IP address block must not overlap with subnets in any spoke or peer network that the gateway can communicate with.

  Note: You can't change assigned IP address ranges. Some IP address ranges are reserved for SSE partners

• CAPACITY: the capacity of the gateway spoke, in Gbps

  Supported capacity values are 1, 10, or 100.