After Oracle Cloud Infrastructure (OCI) configures your
VLAN attachment for a partner Cross-Cloud Interconnect for
Oracle Cloud Infrastructure (OCI) connection, you must
activate it before the attachment can start passing traffic. Activating a VLAN
attachment lets you check that you're connecting successfully with OCI
before the attachment starts passing traffic. It also lets you control
when the attachment starts passing traffic.

If you [pre-activate](https://docs.cloud.google.com/network-connectivity/docs/interconnect/concepts/partner-overview#pre-activate)
your VLAN attachment, the attachment is automatically activated after it's
configured.

For definitions of terms used on this page, see
[Cloud Interconnect key terms](https://docs.cloud.google.com/network-connectivity/docs/interconnect/concepts/terminology).

To help you solve common issues that you might encounter when using
partner Cross-Cloud Interconnect for OCI, see
[Troubleshooting](https://docs.cloud.google.com/network-connectivity/docs/interconnect/support/troubleshooting#partner).

To activate your VLAN attachment, follow these steps.

### Console

1. In the Google Cloud console, go to the **VLAN attachments** tab.

   [Go to VLAN attachments](https://console.cloud.google.com/hybrid/interconnects/list?tab=attachments)
2. Select the VLAN attachment to view its details page.

3. If the status of your attachment is `Waiting for service provider`, make
   sure that you have created a FastConnect virtual circuit using the
   attachments pairing key.

   > [!NOTE]
   > **Note:** If you have created a valid virtual circuit and the attachment status continues in the `PENDING_PARTNER` or `Waiting for service provider` state, open a support ticket with OCI.

4. Review the **Interconnect** information to check that
   OCI has configured the VLAN attachment.

   If an unexpected third party pairs with your VLAN attachment, [delete the
   VLAN attachment](https://docs.cloud.google.com/network-connectivity/docs/interconnect/how-to/partner/delete-vlan-attachments) and
   then create a new one, which generates a new pairing key. Use the new
   pairing key to request another connection from OCI.

   > [!NOTE]
   > **Note:** The **VLAN ID** for the connection is for the Google Cloud side of the connection.

5. Click **Activate**.

### gcloud

1. Describe the VLAN attachment to view its details; the state of the
   attachment must be `PENDING_CUSTOMER` before you can activate it:

   ```
   gcloud compute interconnects attachments describe ATTACHMENT_NAME \
       --region=REGION
   ```

   Replace the following:
   - `ATTACHMENT_NAME`: the name of your VLAN
     attachment

   - `REGION`: the region that your VLAN attachment is
     located in

   The output is similar to the following for IPv4 VLAN attachments:

   ```
   adminEnabled: false
   edgeAvailabilityDomain: AVAILABILITY_DOMAIN_1
   bandwidth: BPS_1G
   cloudRouterIpAddress: 169.254.67.201/29
   creationTimestamp: '2017-12-01T08:29:09.886-08:00'
   customerRouterIpAddress: 169.254.67.202/29
   id: '7976913826166357434'
   kind: compute#interconnectAttachment
   labelFingerprint: 42WmSpB8rSM=
   name: ATTACHMENT_NAME
   pairingKey: 7e51371e-72a3-40b5-b844-2e3efefaee59/REGION/2
   partnerMetadata:
     interconnectName: New York (2)
     partnerName: My Service Provider Inc
     portalUrl: https://service-provider-portal.com
   region: https://www.googleapis.com/compute/v1/projects/customer-project/regions/REGION
   router: https://www.googleapis.com/compute/v1/projects/customer-project/regions/REGION/routers/my-router
   selfLink: https://www.googleapis.com/compute/v1/projects/customer-project/regions/REGION/interconnectAttachments/my-attachment
   stackType: IPV4_ONLY
   state: PENDING_CUSTOMER
   type: PARTNER
   vlanTag8021q: 1000
   ```

   The output is similar to the following for IPv4 and IPv6 (dual stack)
   VLAN attachments:

   ```
   adminEnabled: false
   edgeAvailabilityDomain: AVAILABILITY_DOMAIN_1
   bandwidth: BPS_1G
   cloudRouterIpAddress: 169.254.67.201/29
   cloudRouterIpv6Address: 2600:2d00:0:1::1/125
   creationTimestamp: '2017-12-01T08:31:11.580-08:00'
   customerRouterIpAddress: 169.254.67.202/29
   customerRouterIpv6Address: 2600:2d00:0:1::2/125
   description: Interconnect for Customer 1
   id: '7193021941765913888'
   interconnect: https://www.googleapis.com/compute/alpha/projects/partner-project/global/interconnects/lga-2
   kind: compute#interconnectAttachment
   labelFingerprint: 42WmSpB8rSM=
   name: ATTACHMENT_NAME
   partnerMetadata:
     interconnectName: New York (2)
     partnerName: Partner Inc
     portalUrl: https://partner-portal.com
   region: https://www.googleapis.com/compute/alpha/projects/partner-project/regions/REGION
   selfLink: https://www.googleapis.com/compute/alpha/projects/partner-project/regions/REGION/interconnectAttachments/customer-attachment
   stackType: IPV4_IPV6
   state: PENDING_CUSTOMER
   type: PARTNER
   vlanTag8021q: 1000
   ```

   After OCI has configured your VLAN attachment, the state of
   your attachment changes from `PENDING_PARTNER` to `PENDING_CUSTOMER`.
   If the state is still `PENDING_PARTNER`, wait until OCI has completed
   the VLAN configuration.

   > [!NOTE]
   > **Note:** The VLAN ID for the connection is for the Google Cloud side of the connection.

2. View the `partnerMetadata` field to check that it shows OCI.

   If an unexpected third party pairs with your VLAN attachment, [delete the
   VLAN attachment](https://docs.cloud.google.com/network-connectivity/docs/interconnect/how-to/partner/delete-vlan-attachments) and
   then create a new one, which generates a new pairing key. Use the new
   pairing key to request another connection from OCI.
3. Activate the attachment by using the `--adminEnabled` flag:

   ```
   gcloud compute interconnects attachments partner update ATTACHMENT_NAME \
       --region=REGION \
       --admin-enabled
   ```

After activation, your VLAN attachment can start passing traffic. OCI supplies
their autonomous system number (ASN) when configuring your
VLAN attachment, and then Google automatically adds the ASN to the Border
Gateway Protocol (BGP) session on your Cloud Router.

To configure Cloud Router, follow these steps.

### Console

1. In the Google Cloud console, go to the **VLAN attachments** tab.

   [Go to VLAN attachments](https://console.cloud.google.com/hybrid/interconnects/list?tab=attachments)
2. Select the VLAN attachment that you activated to view its details page.

3. Click **Configure BGP**.

4. In the **Peer ASN** field, add the ASN of your on-premises router.

5. Click **Save and continue**.

### gcloud

1. For each of the BGP peers associated with your VLAN attachments, describe
   the Cloud Router associated with your VLAN attachment, and then
   find the name of the automatically created BGP peer that's associated
   with your VLAN attachment.

   Run the following command:

   ```
   gcloud compute routers describe ROUTER_NAME \
       --region=REGION
   ```

   Replace the following:
   - `ROUTER_NAME`: the name of your Cloud Router
   - `REGION`: the region in which your Cloud Router is located

   The output is similar to the following for IPv4 VLAN attachments:

   ```
   bgp:
    advertiseMode: DEFAULT
    asn: 16550
   bgpPeers:
   - interfaceName: auto-ia-if-my-attachment-c2c53a710bd6c2e
    ipAddress: 169.254.67.201
    managementType: MANAGED_BY_ATTACHMENT
    name: auto-ia-bgp-my-attachment-c2c53a710bd6c2e
    peerIpAddress: 169.254.67.202
   creationTimestamp: '2018-01-25T07:14:43.068-08:00'
   description: 'test'
   id: '4370996577373014668'
   interfaces:
   - ipRange: 169.254.67.201/29
    linkedInterconnectAttachment: https://www.googleapis.com/compute/alpha/projects/customer-project/regions/REGION/interconnectAttachments/my-attachment-partner
    managementType: MANAGED_BY_ATTACHMENT
    name: auto-ia-if-my-attachment-c2c53a710bd6c2e
   kind: compute#router
   name: partner
   network: https://www.googleapis.com/compute/v1/projects/customer-project/global/networks/default
   region: https://www.googleapis.com/compute/v1/projects/customer-project/regions/REGION
   selfLink: https://www.googleapis.com/compute/v1/projects/customer-project/regions/REGION/routers/my-router
   ```

   The output is similar to the following for IPv4 and IPv6 (dual stack)
   VLAN attachments:

   ```
   bgp:
    advertiseMode: DEFAULT
    asn: 16550
   bgpPeers:
   - enableIpv4: true
    enableIpv6: false
    ipAddress: 169.254.67.201
    interfaceName: auto-ia-if-my-attachment-0098154607ecb20
    managementType: MANAGED_BY_ATTACHMENT
    name: auto-ia-bgp4-my-attachment-0098154607ecb20
    peerIpAddress: 169.254.67.202
   - enableIpv4: false
    enableIpv6: true
    ipAddress: 2600:2d00:0:1::1
    interfaceName: auto-ia-if6-my-attachment-0098154607ecb20
    managementType: MANAGED_BY_ATTACHMENT
    name: auto-ia-bgp6-my-attachment-0098154607ecb20
    peerIpAddress: 2600:2d00:0:1::2
   creationTimestamp: '2018-03-29T09:58:25.476-07:00'
   description: ''
   id: '466013140766729694'
   interfaces:
   - ipRange: 169.254.67.201/29
    linkedInterconnectAttachment: https://www.googleapis.com/compute/alpha/projects/customer-project/regions/REGION/interconnectAttachments/customer-attachment
    managementType: MANAGED_BY_ATTACHMENT
    name: auto-ia-if-customer-attach-0098154607ecb20
   - ipRange: 2600:2d00:0:1::1/125
    linkedInterconnectAttachment: https://www.googleapis.com/compute/alpha/projects/customer-project/regions/REGION/interconnectAttachments/customer-attachment
    managementType: MANAGED_BY_ATTACHMENT
    name: auto-ia-if6-customer-attach-0098154607ecb20
   kind: compute#router
   name: customer-router
   network: https://www.googleapis.com/compute/alpha/projects/customer-project/global/networks/default
   region: https://www.googleapis.com/compute/alpha/projects/customer-project/regions/REGION
   selfLink: https://www.googleapis.com/compute/alpha/projects/customer-project/regions/REGION/routers/customer-router
   ```
2. Update each BGP peer with your on-premises router's ASN.

   For the IPv4 BGP peer, run the following command:

   ```
   gcloud compute routers update-bgp-peer ROUTER_NAME \
       --peer-name=IPV4_PEER_NAME \
       --peer-asn=ON_PREM_ASN \
       --region=REGION
   ```

   Replace the following:
   - `IPV4_PEER_NAME`: the `name` of the `bgpPeers` entry with `enableIpv4: true` from the output from the `gcloud compute routers describe` command
   - `ON_PREM_ASN`: your on-premises router's ASN

   For the IPv6 BGP peer, run the following command:

   ```
   gcloud compute routers update-bgp-peer ROUTER_NAME \
       --peer-name=IPV6_PEER_NAME \
       --peer-asn=ON_PREM_ASN \
       --region=REGION
   ```

   Replace `IPV6_PEER_NAME` with the `name` of the
   `bgpPeers` entry with `enableIpv6: true` from the output from the
   `gcloud compute routers describe` command.

## Troubleshooting

For additional guidance, see
[Troubleshooting](https://docs.cloud.google.com/network-connectivity/docs/interconnect/support/troubleshooting).