This page describes the steps to successfully create and configure a
Dedicated Interconnect connection.

> [!NOTE]
> **Note:** For definitions of terms used on this page, see [Cloud Interconnect key
> terms](https://docs.cloud.google.com/network-connectivity/docs/interconnect/concepts/terminology).

To create and configure a Cloud Interconnect connection for
Dedicated Interconnect, follow these steps:

1. Decide if you want
   [MACsec for Cloud Interconnect](https://docs.cloud.google.com/network-connectivity/docs/interconnect/concepts/macsec-overview).

   MACsec for Cloud Interconnect can help you secure traffic on
   Cloud Interconnect connections. If you want
   MACsec for Cloud Interconnect, you must select it when you order a
   Dedicated Interconnect connection.

   MACsec for Cloud Interconnect is available for 100‑Gbps and
   400‑Gbps links, regardless of location. If you want a 10G‑Gpbs
   link with MACsec support, verify that it is [available in your desired
   locations](https://docs.cloud.google.com/network-connectivity/docs/interconnect/concepts/macsec-overview#macsec-availability).
2. [Order a Dedicated Interconnect connection](https://docs.cloud.google.com/network-connectivity/docs/interconnect/how-to/dedicated/ordering-dedicated-interconnect)

   Submit an order, specifying the details of your connection.
   Google then emails you an order confirmation. After your resources have been
   allocated, you receive another email with your LOA-CFAs.
3. [Retrieve LOA-CFAs](https://docs.cloud.google.com/network-connectivity/docs/interconnect/how-to/dedicated/retrieving-loas)

   Send the LOA-CFAs to your vendor. They provision the connections between
   the Google peering edge and your on-premises network. Google
   automatically starts testing the light levels on each allocated port after
   24 hours.
4. [Test the connection](https://docs.cloud.google.com/network-connectivity/docs/interconnect/how-to/dedicated/testing-connections)

   If the light level of your physical ports is within the expected threshold,
   the ports are operational and Google sends you an automated email
   containing configuration details for connectivity testing. Apply these
   configurations to your router so that Google can confirm connectivity.
   This process confirms the IP connectivity of your connection's production
   configuration.

   If you don't apply these configurations (or apply them incorrectly), Google
   sends an automated email with troubleshooting information.

   If the light level of your physical ports is *not* within the expected
   threshold, Google sends an automated email to notify you of the failure.

   After all tests have passed, your Dedicated Interconnect
   connection is ready to use.
5. [Create VLAN attachments](https://docs.cloud.google.com/network-connectivity/docs/interconnect/how-to/dedicated/creating-vlan-attachments)

   When your connection is ready to use, you need to connect
   Virtual Private Cloud (VPC) networks to your on-premises network. To do that,
   first create a VLAN attachment, specifying an existing Cloud Router
   that's in the VPC network that you want to reach.

   If you want to deploy
   [HA VPN over Cloud Interconnect](https://docs.cloud.google.com/network-connectivity/docs/interconnect/concepts/ha-vpn-interconnect),
   you must
   [create encrypted VLAN attachments](https://docs.cloud.google.com/network-connectivity/docs/interconnect/how-to/dedicated/creating-vlan-attachments#encrypted-attachments).
6. [Configure on-premises routers](https://docs.cloud.google.com/network-connectivity/docs/interconnect/how-to/dedicated/configuring-onprem-routers)

   After you create a VLAN attachment, to start sending traffic between
   networks, you need to configure your on-premises router to establish a BGP
   session with your Cloud Router. To configure your on-premises
   router, use the VLAN ID, interface IP address, and peering IP address
   provided by the VLAN attachment.
7. Optional: [Configure HA VPN over Cloud Interconnect](https://docs.cloud.google.com/network-connectivity/docs/interconnect/how-to/configure-ha-vpn-interconnect)

   If you are deploying
   HA VPN over Cloud Interconnect,
   you must build the HA VPN tunnels that carry IPsec-encrypted
   traffic over your VLAN attachment.

If you have any issues during the provisioning steps, refer to the escalation
instructions provided in the Letter of Authorization (LOA) and the email that
we sent to your technical contact. All correspondence flows exclusively through
the customer. For example:

- If we determine that a fault originates on your side of the connection, you must open a ticket with your vendor.
- If the vendor requires additional details to resolve the issue, they must request them from you.
- If you lack such information, like a LOA, you must obtain it from Google and then communicate it to the vendor.