This page describes how to check and request increases for the following before provisioning Cross-Site Interconnect:

- Your quota for *Wire groups unmetered bandwidth per Cloud Interconnect
  metro pair*
- The limit for *Maximum bandwidth per wire*

> [!NOTE]
> **Note:** The 10 Gbps limit for *Maximum bandwidth per traffic flow on a wire* can't be increased.

For more information, see the [Quotas and limits](https://docs.cloud.google.com/network-connectivity/docs/interconnect/quotas) page for Cloud Interconnect.

## Before you begin

Before completing the procedures on this page, review
[Colocation facilities for Cross-Site Interconnect](https://docs.cloud.google.com/network-connectivity/docs/interconnect/concepts/cross-site-locations)
and determine the metros where you want to create your
Cross-Site Interconnect connections.

## Determine your required bandwidth

You need quota that is equal to the bandwidth setting for the wire group. For
example, if you want both wires in a group to have 1 Gbps bandwidth each, you
need a quota of 1 Gbps.

If the wire group is in port mode you can only use
one wire group with each set of ports. If the wire group is in VLAN mode, you
can optionally create a second wire group on some or all of the same ports
if you have remaining connection capacity and quota. Keep in mind that creating
a second wire group increases the quota required between metros.

## Check your quota for bandwidth per Cloud Interconnect metro pair

To check your quota, follow these steps:

1. In the Google Cloud console, go to the **Quotas** page.


   [Go to Quotas](https://console.cloud.google.com/iam-admin/quotas)

   <br />

2. View the quota for
   [**Wire groups unmetered bandwidth per Interconnect metro pair**](https://console.cloud.google.com/iam-admin/quotas?service=compute.googleapis.com&metric=compute.googleapis.com/wire_groups_gold_unmetered_bandwidth_gbps). There is a separate quota for each pair of metros.

3. In the **Dimensions** column, identify the pair of metros that you want to
   connect, for example `Ashburn|Chicago`, and check the **Value** column.

4. If the bandwidth between metros in your planned configuration exceeds your current quota, follow the instructions to [Request additional quota](https://docs.cloud.google.com/network-connectivity/docs/interconnect/quotas#requesting-additional-quota).

## Review the limit for bandwidth per wire

You can view the *Maximum bandwidth per wire* limit on the
[Quotas and limits](https://docs.cloud.google.com/network-connectivity/docs/interconnect/quotas#limits) page.

If your bandwidth per wire in your planned configuration exceeds the limit,
[file a support case](https://cloud.google.com/support-hub) to request an
increase.