The Aerospike integration collects key namespace and system metrics, such as disk and memory usage, scans,
and connections. The integration collects these metrics using the official
client API provided by Aerospike.

For more information about Aerospike, see the
[Aerospike documentation](https://aerospike.com/).

## Prerequisites

To collect Aerospike telemetry, you must
[install the Ops Agent](https://docs.cloud.google.com/monitoring/agent/ops-agent/install-index):

- For metrics, install version 2.18.2 or higher.
- For logs, install version 2.23.0 or higher.

This integration supports Aerospike versions 4.9, 5.x, and 6.x.

## Configure your Aerospike instance

Aerospike logs are automatically ingested on systems where Aerospike runs as
a `systemd` service. On other systems such as SLES, you can manually
configure a
[`files`](https://docs.cloud.google.com/stackdriver/docs/solutions/agents/ops-agent/configuration#logging-receivers)
receiver which points to Aerospike's log file, which is usually located at
`$HOME/aerospike-server/var/log/aerospike.log`.

## Configure the Ops Agent for Aerospike

Following the guide to [Configure the Ops
Agent](https://docs.cloud.google.com/monitoring/agent/ops-agent/configuration#file-location), add the required elements
to collect telemetry from Aerospike instances, and
[restart the agent](https://docs.cloud.google.com/monitoring/agent/ops-agent/installation#restart).

### Example configuration

The following commands create the configuration to collect and ingest telemetry
for Aerospike:

    # Configures Ops Agent to collect telemetry from the app. You must restart the agent for the configuration to take effect.

    set -e

    # Check if the file exists
    if [ ! -f /etc/google-cloud-ops-agent/config.yaml ]; then
      # Create the file if it doesn't exist.
      sudo mkdir -p /etc/google-cloud-ops-agent
      sudo touch /etc/google-cloud-ops-agent/config.yaml
    fi

    # Create a back up of the existing file so existing configurations are not lost.
    sudo cp /etc/google-cloud-ops-agent/config.yaml /etc/google-cloud-ops-agent/config.yaml.bak

    # Configure the Ops Agent.
    sudo tee /etc/google-cloud-ops-agent/config.yaml > /dev/null << EOF
    metrics:
      receivers:
        aerospike:
          type: aerospike
      service:
        pipelines:
          aerospike:
            receivers:
              - aerospike
    EOF

For these changes to take effect, you must restart the Ops Agent:

### Linux

1. To restart the agent, run the following command on your instance:

   ```
   sudo systemctl restart google-cloud-ops-agent
   ```
2. To confirm that the agent restarted, run the following command and verify that the components "Metrics Agent" and "Logging Agent" started:

   ```
   sudo systemctl status "google-cloud-ops-agent*"
   ```

### Windows

1. Connect to your instance using RDP or a similar tool and login to Windows.
2. Open a PowerShell terminal with administrator privileges by right-clicking the PowerShell icon and selecting **Run as Administrator**
3. To restart the agent, run the following PowerShell command:

   ```
   Restart-Service google-cloud-ops-agent -Force
   ```
4. To confirm that the agent restarted, run the following command and verify that the components "Metrics Agent" and "Logging Agent" started:

   ```
   Get-Service google-cloud-ops-agent*
   ```

### Collect logs

Aerospike writes logs to `syslog`, which is captured by the Ops Agent by default.
No additional user configuration is required.

### Configure metrics collection

To ingest metrics from Aerospike, you must create a receiver for the metrics
that Aerospike produces and then create a pipeline for the new receiver.

This receiver does not
support the use of multiple instances in the configuration, for example, to
monitor multiple endpoints. All such instances write to the same time series,
and Cloud Monitoring has no way to distinguish among them.

To configure a receiver for your `aerospike` metrics, specify the following
fields:

| Field | Default | Description |
|---|---|---|
| `collect_cluster_metrics` | `true` | Configures the receiver to collect metrics from peer nodes of the Aerospike system. |
| `collection_interval` | `60s` | A [time duration](https://pkg.go.dev/time#ParseDuration) value, such as `30s` or `5m`. |
| `endpoint` | `localhost:3000` | Address of the Aerospike system, formatted as host:port. |
| `password` |   | The configured password if Aerospike is configured to require authentication. |
| `timeout` | `20s` | Timeout for requests to the Aerospike system, a [time duration](https://pkg.go.dev/time#ParseDuration) value such as `30s` or `5m`. |
| `type` | `aerospike` | This value must be `aerospike`. |
| `username` |   | The configured username if Aerospike is configured to require authentication. |

#### What is monitored

The following table provides the list of metrics that the Ops Agent collects
from the Aerospike instance.


| Metric type ||
| Kind, Type Monitored resources | Labels |
|---|---|
| `workload.googleapis.com/aerospike.namespace.disk.available` ||
| `GAUGE`, `INT64` **gce_instance** | `namespace_name` `node_name` |
| `workload.googleapis.com/aerospike.namespace.memory.free` ||
| `GAUGE`, `INT64` **gce_instance** | `namespace_name` `node_name` |
| `workload.googleapis.com/aerospike.namespace.memory.usage` ||
| `GAUGE`, `INT64` **gce_instance** | `component` `namespace_name` `node_name` |
| `workload.googleapis.com/aerospike.namespace.scan.count` ||
| `CUMULATIVE`, `INT64` **gce_instance** | `namespace_name` `node_name` `result` `type` |
| `workload.googleapis.com/aerospike.namespace.transaction.count` ||
| `CUMULATIVE`, `INT64` **gce_instance** | `namespace_name` `node_name` `result` `type` |
| `workload.googleapis.com/aerospike.node.connection.count` ||
| `CUMULATIVE`, `INT64` **gce_instance** | `node_name` `operation` `type` |
| `workload.googleapis.com/aerospike.node.connection.open` ||
| `GAUGE`, `INT64` **gce_instance** | `node_name` `type` |
| `workload.googleapis.com/aerospike.node.memory.free` ||
| `GAUGE`, `INT64` **gce_instance** | `node_name` |

## Verify the configuration

This section describes how to verify that you correctly configured the
Aerospike receiver. It might take one or two
minutes for the Ops Agent to begin collecting telemetry.

To verify that Aerospike logs are being sent to
Cloud Logging, do the following:

1. In the Google Cloud console, go to the

   **Logs Explorer** page:

   [Go to **Logs Explorer**](https://console.cloud.google.com/logs/query)

   <br />

   If you use the search bar to find this page, then select the result whose subheading is
   **Logging**.
2. Enter the following query in the editor, and then click **Run query** :   

   ```
   resource.type="gce_instance"
   log_id("syslog")
   jsonPayload.message~=' asd([[0-9]+])*:'
   ```

<br />

To verify that Aerospike metrics are being sent to
Cloud Monitoring, do the following:

1. In the Google Cloud console, go to the
   **Metrics explorer** page:

   [Go to **Metrics explorer**](https://console.cloud.google.com/monitoring/metrics-explorer)

   <br />

   If you use the search bar to find this page, then select the result whose subheading is
   **Monitoring**.
2. In the toolbar of the query-builder pane, select the button whose name is **PromQL**.
3. Enter the following query in the editor, and then click **Run query** :   

   ```
   {"workload.googleapis.com/aerospike.node.connection.open", monitored_resource="gce_instance"}
   ```

<br />

## View dashboard

To view your Aerospike metrics, you must have a chart or dashboard
configured.

The Aerospike integration includes one or more dashboards for you.

Any dashboards are automatically installed after you configure the
integration and the Ops Agent has begun collecting metric data.

You can also view static previews of dashboards without
installing the integration.

To view an installed dashboard, do the following:

1. In the Google Cloud console, go to the **Dashboards** page:

   [Go to **Dashboards**](https://console.cloud.google.com/monitoring/dashboards)

   <br />

   If you use the search bar to find this page, then select the result whose subheading is
   **Monitoring**.
2. Select the **Dashboard List** tab, and then choose the **Integrations** category.
3. Click the name of the dashboard you want to view.

<br />

If you have configured an integration but the dashboard has not been
installed, then check that the Ops Agent is running. When there is no
metric data for a chart in the dashboard, installation of the dashboard fails.
After the Ops Agent begins collecting metrics, the dashboard is installed
for you.

To view a static preview of the dashboard, do the following:

1. In the Google Cloud console, go to the
   ![](https://docs.cloud.google.com/static/monitoring/images/integrations-icon.png) **Integrations**
   page:

   [Go to **Integrations**](https://console.cloud.google.com/monitoring/integrations)

   <br />

   If you use the search bar to find this page, then select the result whose subheading is
   **Monitoring**.
2. Click the **Compute Engine** deployment-platform filter.
3. Locate the entry for Aerospike and click **View Details**.
4. Select the **Dashboards** tab to see a static preview. If the dashboard is installed, then you can navigate to it by clicking **View dashboard**.

<br />

For more information about dashboards in Cloud Monitoring, see
[Dashboards and charts](https://docs.cloud.google.com/monitoring/dashboards).

For more information about using the **Integrations** page, see
[Manage integrations](https://docs.cloud.google.com/monitoring/agent/integrations).

## Install alerting policies

Alerting policies instruct Cloud Monitoring to notify you when
specified conditions occur.

The Aerospike integration includes one or more alerting policies for
you to use.

You can view and install
these alerting policies from the **Integrations** page in
Monitoring.

To view the descriptions of available alerting policies and
install them, do the following:

1. In the Google Cloud console, go to the
   ![](https://docs.cloud.google.com/static/monitoring/images/integrations-icon.png) **Integrations**
   page:

   [Go to **Integrations**](https://console.cloud.google.com/monitoring/integrations)

   <br />

   If you use the search bar to find this page, then select the result whose subheading is
   **Monitoring**.
2. Locate the entry for Aerospike and click **View Details**.
3. Select the **Alerts** tab. This tab provides descriptions of available alerting policies and provides an interface for installing them.
4. Install alerting policies. Alerting policies need to know where to send notifications that the alert has been triggered, so they require information from you for installation. To install alerting policies, do the following:
   1. From the list of available alerting policies, select those that you want to install.
   2. In the **Configure notifications** section, select one or
      more notification channels. You have the option to disable the
      use of notification channels, but if you do, then your alerting
      policies fire silently. You can check their status in
      Monitoring, but you receive no notifications.

      For more information about notification channels,
      see [Manage
      notification channels](https://docs.cloud.google.com/monitoring/support/notification-options).
   3. Click **Create Policies**.

<br />

For more information about alerting policies in Cloud Monitoring, see
[Introduction to alerting](https://docs.cloud.google.com/monitoring/alerts).

For more information about using the **Integrations** page, see
[Manage integrations](https://docs.cloud.google.com/monitoring/agent/integrations).

## What's next

For a walkthrough on how to use Ansible to install the Ops Agent, configure
a third-party application, and install a sample dashboard, see the
[Install the Ops Agent to troubleshoot third-party applications](https://www.youtube.com/watch?v=GQgNygd-XJU&t=7s) video.