The Jetty integration collects session and thread-usage metrics. The
integration also collects access and system logs. Access logs are parsed
into a JSON payload focused on request details.

For more information about Jetty, see the
[Jetty documentation](https://www.eclipse.org/jetty/).

## Prerequisites

To collect Jetty telemetry, you must
[install the Ops Agent](https://docs.cloud.google.com/logging/docs/agent/ops-agent/install-index.md.txt):

- For metrics, install version 2.17.0 or higher.
- For logs, install version 2.16.0 or higher.

This integration supports Jetty versions 9.4.x, 10.x, and 11.x.

## Configure your Jetty instance

To collect metrics from this integration, you must expose a
[Java Management Extensions (JMX)](https://www.oracle.com/java/technologies/javase/javamanagement.html)
endpoint.

To expose a JMX endpoint, you must set the `com.sun.management.jmxremote.port`
system property when starting the JVM. We also recommend setting the
`com.sun.management.jmxremote.rmi.port` system property to the same port. To
expose a JMX endpoint remotely, you must also set the `java.rmi.server.hostname`
system property.

By default, these properties are set in the Jetty `/etc/jetty-jmx.xml` file.

To set system properties by using command-line arguments, prepend the property
name with `-D` when starting the JVM. For example, to set
`com.sun.management.jmxremote.port` to port 1099, specify the following when
starting the JVM:

```
-Dcom.sun.management.jmxremote.port=1099
```

## Configure the Ops Agent for Jetty

Following the guide to [Configure the Ops
Agent](https://docs.cloud.google.com/logging/docs/agent/ops-agent/configuration#file-location), add the required elements
to collect telemetry from Jetty instances, and
[restart the agent](https://docs.cloud.google.com/logging/docs/agent/ops-agent/installation.md.txt#restart).

### Example configuration

The following commands create the configuration to collect and ingest telemetry
for Jetty:

    # Configures Ops Agent to collect telemetry from the app. You must restart the agent for the configuration to take effect.

    set -e

    # Check if the file exists
    if [ ! -f /etc/google-cloud-ops-agent/config.yaml ]; then
      # Create the file if it doesn't exist.
      sudo mkdir -p /etc/google-cloud-ops-agent
      sudo touch /etc/google-cloud-ops-agent/config.yaml
    fi

    # Create a back up of the existing file so existing configurations are not lost.
    sudo cp /etc/google-cloud-ops-agent/config.yaml /etc/google-cloud-ops-agent/config.yaml.bak

    # Configure the Ops Agent.
    sudo tee /etc/google-cloud-ops-agent/config.yaml > /dev/null << EOF
    metrics:
      receivers:
        jetty_metrics:
          type: jetty
      service:
        pipelines:
          jetty_pipeline:
            receivers:
              - jetty_metrics
    logging:
      receivers:
        jetty_access:
          type: jetty_access
      service:
        pipelines:
          jetty:
            receivers:
              - jetty_access
    EOF

For these changes to take effect, you must restart the Ops Agent:

### Linux

1. To restart the agent, run the following command on your instance:

   ```
   sudo systemctl restart google-cloud-ops-agent
   ```
2. To confirm that the agent restarted, run the following command and verify that the components "Metrics Agent" and "Logging Agent" started:

   ```
   sudo systemctl status "google-cloud-ops-agent*"
   ```

### Windows

1. Connect to your instance using RDP or a similar tool and login to Windows.
2. Open a PowerShell terminal with administrator privileges by right-clicking the PowerShell icon and selecting **Run as Administrator**
3. To restart the agent, run the following PowerShell command:

   ```
   Restart-Service google-cloud-ops-agent -Force
   ```
4. To confirm that the agent restarted, run the following command and verify that the components "Metrics Agent" and "Logging Agent" started:

   ```
   Get-Service google-cloud-ops-agent*
   ```

### Configure logs collection

To ingest logs from Jetty, you must create a receiver for the logs
that Jetty produces and then create a pipeline for the new receiver.

To configure a receiver for your `jetty_access` logs, specify the following
fields:

| Field | Default | Description |
|---|---|---|
| `exclude_paths` |   | A list of filesystem path patterns to exclude from the set matched by `include_paths`. |
| `include_paths` | `["/opt/logs/*.request.log"]` | A list of filesystem paths to read by tailing each file. A wild card (`*`) can be used in the paths. |
| `record_log_file_path` | `false` | If set to `true`, then the path to the specific file from which the log record was obtained appears in the output log entry as the value of the `agent.googleapis.com/log_file_path` label. When using a wildcard, only the path of the file from which the record was obtained is recorded. |
| `type` |   | This value must be `jetty_access`. |
| `wildcard_refresh_interval` | `60s` | The interval at which wildcard file paths in `include_paths` are refreshed. Given as a [time duration](https://pkg.go.dev/time#ParseDuration), for example `30s` or `2m`. This property might be useful under high logging throughputs where log files are rotated faster than the default interval. |

#### What is logged

The `logName` is derived from
the receiver IDs specified in the configuration. Detailed fields inside the
[`LogEntry`](https://docs.cloud.google.com/logging/docs/reference/v2/rest/v2/LogEntry.md.txt)
are as follows.

The `jetty_access` logs contain the following fields in the `LogEntry`:

| Field | Type | Description |
|---|---|---|
| `httpRequest` | object | See [`HttpRequest`](https://docs.cloud.google.com/logging/docs/reference/v2/rest/v2/LogEntry.md.txt#HttpRequest) |
| `severity` | string ([`LogSeverity`](https://docs.cloud.google.com/logging/docs/reference/v2/rest/v2/LogEntry.md.txt#LogSeverity)) | Log entry level (translated). |

The `syslog` logs contain the following fields in the `LogEntry`:

| Field | Type | Description |
|---|---|---|
| `jsonPayload.message` | string | Log message |

### Configure metrics collection

To ingest metrics from Jetty, you must create a receiver for the metrics
that Jetty produces and then create a pipeline for the new receiver.

This receiver does not
support the use of multiple instances in the configuration, for example, to
monitor multiple endpoints. All such instances write to the same time series,
and Cloud Monitoring has no way to distinguish among them.

To configure a receiver for your `jetty` metrics, specify the following
fields:

| Field | Default | Description |
|---|---|---|
| `collect_jvm_metrics` | `true` | Configures the receiver to also collect the supported JVM metrics. |
| `collection_interval` | `60s` | A [time duration](https://pkg.go.dev/time#ParseDuration) value, such as `30s` or `5m`. |
| `endpoint` | `localhost:1099` | The [JMX Service URL](https://docs.oracle.com/javase/8/docs/api/javax/management/remote/JMXServiceURL.html) or host and port used to construct the service URL. This value must be in the form of `service:jmx:<protocol>:<sap>` or `host:port`. Values in `host:port` form are used to create a service URL of `service:jmx:rmi:///jndi/rmi://<host>:<port>/jmxrmi`. |
| `password` |   | The configured password if JMX is configured to require authentication. |
| `type` |   | This value must be `jetty`. |
| `username` |   | The configured username if JMX is configured to require authentication. |

#### What is monitored

The following table provides the list of metrics that the Ops Agent collects
from the Jetty instance.


| Metric type ||
| Kind, Type Monitored resources | Labels |
|---|---|
| `workload.googleapis.com/jetty.select.count` ||
| `CUMULATIVE`, `INT64` **gce_instance** |   |
| `workload.googleapis.com/jetty.session.count` ||
| `CUMULATIVE`, `INT64` **gce_instance** | `resource` |
| `workload.googleapis.com/jetty.session.time.max` ||
| `GAUGE`, `INT64` **gce_instance** | `resource` |
| `workload.googleapis.com/jetty.session.time.total` ||
| `GAUGE`, `INT64` **gce_instance** | `resource` |
| `workload.googleapis.com/jetty.thread.count` ||
| `GAUGE`, `INT64` **gce_instance** | `state` |
| `workload.googleapis.com/jetty.thread.queue.count` ||
| `GAUGE`, `INT64` **gce_instance** |   |

## Verify the configuration

This section describes how to verify that you correctly configured the
Jetty receiver. It might take one or two
minutes for the Ops Agent to begin collecting telemetry.

To verify that Jetty logs are being sent to
Cloud Logging, do the following:

1. In the Google Cloud console, go to the

   **Logs Explorer** page:

   [Go to **Logs Explorer**](https://console.cloud.google.com/logs/query)

   <br />

   If you use the search bar to find this page, then select the result whose subheading is
   **Logging**.
2. Enter the following query in the editor, and then click **Run query** :   

   ```
   resource.type="gce_instance"
   (log_id("jetty_access") OR log_id("syslog"))
   ```

<br />

To verify that Jetty metrics are being sent to
Cloud Monitoring, do the following:

1. In the Google Cloud console, go to the
   **Metrics explorer** page:

   [Go to **Metrics explorer**](https://console.cloud.google.com/monitoring/metrics-explorer)

   <br />

   If you use the search bar to find this page, then select the result whose subheading is
   **Monitoring**.
2. In the toolbar of the query-builder pane, select the button whose name is **PromQL**.
3. Enter the following query in the editor, and then click **Run query** :   

   ```
   {"workload.googleapis.com/jetty.select.count", monitored_resource="gce_instance"}
   ```

<br />

## View dashboard

To view your Jetty metrics, you must have a chart or dashboard
configured.

The Jetty integration includes one or more dashboards for you.

Any dashboards are automatically installed after you configure the
integration and the Ops Agent has begun collecting metric data.

You can also view static previews of dashboards without
installing the integration.

To view an installed dashboard, do the following:

1. In the Google Cloud console, go to the **Dashboards** page:

   [Go to **Dashboards**](https://console.cloud.google.com/monitoring/dashboards)

   <br />

   If you use the search bar to find this page, then select the result whose subheading is
   **Monitoring**.
2. Select the **Dashboard List** tab, and then choose the **Integrations** category.
3. Click the name of the dashboard you want to view.

<br />

If you have configured an integration but the dashboard has not been
installed, then check that the Ops Agent is running. When there is no
metric data for a chart in the dashboard, installation of the dashboard fails.
After the Ops Agent begins collecting metrics, the dashboard is installed
for you.

To view a static preview of the dashboard, do the following:

1. In the Google Cloud console, go to the
   ![](https://docs.cloud.google.com/static/monitoring/images/integrations-icon.png) **Integrations**
   page:

   [Go to **Integrations**](https://console.cloud.google.com/monitoring/integrations)

   <br />

   If you use the search bar to find this page, then select the result whose subheading is
   **Monitoring**.
2. Click the **Compute Engine** deployment-platform filter.
3. Locate the entry for Jetty and click **View Details**.
4. Select the **Dashboards** tab to see a static preview. If the dashboard is installed, then you can navigate to it by clicking **View dashboard**.

<br />

For more information about dashboards in Cloud Monitoring, see
[Dashboards and charts](https://docs.cloud.google.com/monitoring/dashboards.md.txt).

For more information about using the **Integrations** page, see
[Manage integrations](https://docs.cloud.google.com/monitoring/agent/integrations.md.txt).

## Install alerting policies

Alerting policies instruct Cloud Monitoring to notify you when
specified conditions occur.

The Jetty integration includes one or more alerting policies for
you to use.

You can view and install
these alerting policies from the **Integrations** page in
Monitoring.

To view the descriptions of available alerting policies and
install them, do the following:

1. In the Google Cloud console, go to the
   ![](https://docs.cloud.google.com/static/monitoring/images/integrations-icon.png) **Integrations**
   page:

   [Go to **Integrations**](https://console.cloud.google.com/monitoring/integrations)

   <br />

   If you use the search bar to find this page, then select the result whose subheading is
   **Monitoring**.
2. Locate the entry for Jetty and click **View Details**.
3. Select the **Alerts** tab. This tab provides descriptions of available alerting policies and provides an interface for installing them.
4. Install alerting policies. Alerting policies need to know where to send notifications that the alert has been triggered, so they require information from you for installation. To install alerting policies, do the following:
   1. From the list of available alerting policies, select those that you want to install.
   2. In the **Configure notifications** section, select one or
      more notification channels. You have the option to disable the
      use of notification channels, but if you do, then your alerting
      policies fire silently. You can check their status in
      Monitoring, but you receive no notifications.

      For more information about notification channels,
      see [Manage
      notification channels](https://docs.cloud.google.com/monitoring/support/notification-options).
   3. Click **Create Policies**.

<br />

For more information about alerting policies in Cloud Monitoring, see
[Introduction to alerting](https://docs.cloud.google.com/monitoring/alerts.md.txt).

For more information about using the **Integrations** page, see
[Manage integrations](https://docs.cloud.google.com/monitoring/agent/integrations.md.txt).

## What's next

For a walkthrough on how to use Ansible to install the Ops Agent, configure
a third-party application, and install a sample dashboard, see the
[Install the Ops Agent to troubleshoot third-party applications](https://www.youtube.com/watch?v=GQgNygd-XJU&t=7s) video.