# WooCommerce

Use the WooCommerce connector to perform insert, delete, update, and read operations in WooCommerce.

## Before you begin

Before using the WooCommerce connector, do the following tasks:

- In your Google Cloud project:
  - Ensure that network connectivity is set up. For information about network patterns, see [Network connectivity](https://docs.cloud.google.com/integration-connectors/docs/network-connectivity-private.md.txt).
  - Grant the [roles/connectors.admin](https://docs.cloud.google.com/integration-connectors/docs/connectors-access-permissions.md.txt#iam-roles-for-integration-connectors) IAM role to the user configuring the connector.
  - Grant the following IAM roles to the service account that you want to use for the connector:
    - `roles/secretmanager.viewer`
    - `roles/secretmanager.secretAccessor`

    A service account is a special type of Google account intended to represent a non-human
    user that needs to authenticate and be authorized to access data in Google APIs.
    If you don't have a service account, you must create a service account. The connector and the service account must belong to the same project. For more
    information, see
    [Creating a service account](https://docs.cloud.google.com/iam/docs/creating-managing-service-accounts#creating).
  - Enable the following services:
    - `secretmanager.googleapis.com` (Secret Manager API)
    - `connectors.googleapis.com` (Connectors API)

    To understand how to enable services, see [Enabling services](https://docs.cloud.google.com/service-usage/docs/enable-disable.md.txt#enabling).


  If these services or permissions have not been enabled for your project previously, you are prompted to enable them
  when configuring the connector.

## Configure the connector

A connection is specific to a data source. It
means that if you have many data sources, you must create a separate connection
for each data source. To create a connection, do the following:

1. In the [Cloud console](https://console.cloud.google.com), go to the **Integration Connectors \> Connections** page and then select or create a Google Cloud project.


   [Go to the Connections page](https://console.cloud.google.com/connectors/connections)
2. Click **+ CREATE NEW** to open the **Create Connection** page.
3. In the **Location** section, choose the location for the connection.
   1. **Region** : Select a location from the drop-down list.

      For the list of all the supported regions, see [Locations](https://docs.cloud.google.com/integration-connectors/docs/locations.md.txt).
   2. Click **NEXT**.
4. In the **Connection Details** section, complete the following:
   1. **Connector** : Select **WooCommerce** from the drop down list of available Connectors.
   2. **Connector version**: Select the Connector version from the drop down list of available versions.
   3. In the **Connection Name** field, enter a name for the Connection instance.

      Connection names must meet the following criteria:
      - Connection names can use letters, numbers, or hyphens.
      - Letters must be lower-case.
      - Connection names must begin with a letter and end with a letter or number.
      - Connection names cannot exceed 49 characters.
   4. Optionally, enter a **Description** for the connection instance.
   5. Optionally, enable [Cloud logging](https://docs.cloud.google.com/integration-connectors/docs/view-connector-logs.md.txt), and then select a log level. By default, the log level is set to `Error`.
   6. **Service Account** : Select a service account that has the [required roles](https://docs.cloud.google.com/integration-connectors/docs/connectors/woocommerce/configure.md.txt#before-you-begin).
   7. Optionally, configure the **Connection node settings** :


      - **Minimum number of nodes**: Enter the minimum number of connection nodes.
      - **Maximum number of nodes**: Enter the maximum number of connection nodes.

      A node is a unit (or replica) of a connection that processes transactions.
      More nodes are required to process more transactions for a connection and conversely,
      fewer nodes are required to process fewer transactions.
      To understand how the nodes affect your connector pricing, see
      [Pricing for connection nodes](https://docs.cloud.google.com/integration-connectors/docs/pricing#pricing-for-connection-nodes). If you don't enter any values, by default
      the minimum nodes are set to 2 (for better availability) and the maximum nodes are set to 50.

   > [!NOTE]
   > **Note:** You can customize the connection node values only if you are a Pay-as-you-go customer.

   8. (Optional) In the **Advanced settings** section, select the **Use proxy** checkbox to configure a proxy server for the connection and configure the following values:
      - **Proxy Auth Scheme** : Select the authentication type to authenticate with the proxy server. The following authentication types are supported:
        - **Basic**: Basic HTTP authentication.
        - **Digest**: Digest HTTP authentication.
      - **Proxy User**: A user name to be used to authenticate with the proxy server.
      - **Proxy Password**: The Secret manager secret of the user's password.
      - **Proxy SSL Type** : The SSL type to use when connecting to the proxy server. The following authentication types are supported:
        - **Auto**: Default setting. If the URL is an HTTPS URL, then the Tunnel option is used. If the URL is an HTTP URL, then the NEVER option is used.
        - **Always**: The connection is always SSL enabled.
        - **Never**: The connection is not SSL enabled.
        - **Tunnel**: The connection is through a tunneling proxy. The proxy server opens a connection to the remote host and traffic flows back and forth through the proxy.
      - In the **Proxy Server** section, enter details of the proxy server.
        1. Click **+ Add destination**.
        2. Select a **Destination Type** .
           - **Host address** : Specify the hostname or IP address of the destination.

             If you want to establish a private connection to your backend system, do the following:
             - Create a [PSC service attachment](https://docs.cloud.google.com/integration-connectors/docs/configure-psc).
             - Create an [endpoint attachment](https://docs.cloud.google.com/integration-connectors/docs/create-ep-attachment) and then enter the details of the endpoint attachment in the **Host address** field.
   9. Optionally, click **+ ADD LABEL** to add a label to the Connection in the form of a key/value pair.
   10. Click **NEXT**.
5. In the **Destinations** section, enter details of the remote host (backend system) you want to connect to.
   1. **Destination Type** : Select a **Destination Type** .
      - To specify the destination hostname or IP address, select **Host address** and enter the address in the **host 1** field.
      - To establish a private connection, select **Endpoint attachment** . In the **Endpoint Attachment** list, select the endpoint attachment created for your backend system.

      > [!NOTE]
      > **Note:** To learn how to create an endpoint attachment, see [Private
      > network connectivity](https://docs.cloud.google.com/integration-connectors/docs/network-connectivity-private). After creating the endpoint attachment, it is visible in the **Endpoint Attachment** list.

      If you want to establish a public connection to your backend systems with additional security, you can
      consider [configuring static outbound
      IP addresses for your connections](https://docs.cloud.google.com/integration-connectors/docs/configure-static-ip), and then configure
      your firewall rules to allowlist only the specific static IP addresses.
   2. Click **NEXT**.
6. In the **Authentication** section, enter the authentication details.

   To understand how to configure these authentication types, see [Configure authentication](https://docs.cloud.google.com/integration-connectors/docs/connectors/woocommerce/configure.md.txt#configure-auth).
7. After you specify the authentication details, click **NEXT**.
8. **Review**: Review your connection and authentication details.
9. Click **Create**.

### Configure authentication

Enter the authentication details.

- **Consumer Key**: The consumer key assigned by WooCommerce when creating the authentication credentials.
- **Consumer Secret**: Secret Manager Secret containing the consumer secret associated with the connector.

## System limitations

The Woocommerce connector can process 2 transactions per second,
per [node](https://docs.cloud.google.com/integration-connectors/docs/pricing#payg),
and [throttles](https://docs.cloud.google.com/integration-connectors/docs/rate-limiting.md.txt) any transactions
beyond this limit.
By default, Integration Connectors allocates 2 nodes (for better availability) for a connection.

For information on the limits applicable to Integration Connectors, see [Limits](https://docs.cloud.google.com/integration-connectors/docs/quotas.md.txt).

> [!NOTE]
> **Note:** The number of [Integration Connectors nodes](https://docs.cloud.google.com/integration-connectors/docs/pricing#pricing-for-connection-nodes) will autoscale dynamically based on your usage. However, if you want to reserve capacity for large volumes without waiting for autoscaling, you can adjust the minimum node value for a connection. More nodes are required to process more transactions for a connection. Conversely, fewer nodes are required if a connection processes fewer transactions. To configure the node values, do the following:
>
> - If you are a pay-as-you-go customer, configure the minimum and maximum node value in the edit connection page.
> - If you are a subscription based customer, [contact support](https://docs.cloud.google.com/integration-connectors/docs/getting-support.md.txt).
>
> The maximum transactions that a node can handle depends on various factors. So, before adjusting the minimum nodes for better throughput,
> it is recommended you check if your backend systems are set up optimally to handle the required traffic.

## Use the WooCommerce connection in an integration

After you create the connection, it becomes available in both
Apigee Integration and Application Integration. You can use the connection
in an integration through the Connectors task.

- To understand how to create and use the Connectors task in Apigee Integration, see [Connectors task](https://docs.cloud.google.com/apigee/docs/api-platform/integration/connectors-task#configure-the-connectors-task).
- To understand how to create and use the Connectors task in Application Integration, see [Connectors task](https://docs.cloud.google.com/application-integration/docs/configure-connectors-task.md.txt).

## Entities, operations, and actions


All the Integration Connectors provide a layer of abstraction for the objects of
the connected application. You can access an application's objects only through
this abstraction. The abstraction is exposed to you as entities, operations, and actions.

> [!NOTE]
> **Note:** You can view the entities, operations, and actions of a connector in the [Connectors task](https://docs.cloud.google.com/application-integration/docs/connectors-task).

- **Entity:** An entity can be thought of as an object, or a collection of properties, in the connected application or service. The definition of an entity differs from a connector to a connector. For example, in a database connector, tables are the entities, in a file server connector, folders are the entities, and in a messaging system connector, queues are the entities.

  However, it is possible that a connector doesn't support or have any entities, in which case the
  `Entities` list will be empty.
- **Operation:** An operation is the activity that you can perform on an entity. You can perform any of the following operations on an entity:
  - [List](https://docs.cloud.google.com/application-integration/docs/configure-connectors-task.md.txt#config-prop)
  - [Get](https://docs.cloud.google.com/application-integration/docs/configure-connectors-task.md.txt#config-prop)
  - [Create](https://docs.cloud.google.com/application-integration/docs/configure-connectors-task.md.txt#config-prop)
  - [Update](https://docs.cloud.google.com/application-integration/docs/configure-connectors-task.md.txt#config-prop)
  - [Delete](https://docs.cloud.google.com/application-integration/docs/configure-connectors-task.md.txt#config-prop)

  Selecting an entity from the available list, generates a list of
  operations available for the entity. For a detailed description of the operations, see the Connectors task's
  [entity operations](https://docs.cloud.google.com/application-integration/docs/connectors-task#config-prop).
  However, if a connector doesn't support any of the entity operations, such unsupported
  operations aren't listed in the `Operations` list.
- **Action:** An action is a first class function that is made available to the integration through the connector interface. An action lets you make changes to an entity or entities, and vary from connector to connector. Normally, an action will have some input parameters, and an output parameter. However, it is possible that a connector doesn't support any action, in which case the `Actions` list will be empty.

> [!NOTE]
> **Note:** All entities and actions will have a schema associated with them. For example, an action schema will have the parameter details such as; the parameter names, and its corresponding data type. The schema (metadata) for entities and actions is fetched by the connection at runtime from your backend. If there are any updates to the schema, such updates won't be automatically reflected in your existing connections; you must manually refresh the schema. To refresh the schema for a connection, open the **Connection details** page of the connection, and then click **Refresh connection schema**.

## Actions

This section lists the actions supported by the connector. To understand how to configure the
actions, see [Action examples](https://docs.cloud.google.com/integration-connectors/docs/connectors/woocommerce/configure.md.txt#actionexamples-exp).

> [!NOTE]
> **Note:** The results of all the actions will be available as a JSON response in the `Connectors` task's `connectorOutputPayload` response parameter after you run your integration.

### Update Shipping Zone Locations action

This action lets you Update the locations for a shipping zone in the Woocommerce.

#### Input parameters of the Update Shipping Zone Locations action

| Parameter name | Data type | Required | Description |
|---|---|---|---|
| ZoneId | String | Yes | The ID of the zone to update. |
| Locations | String | Yes | The location details. |

For example on how to configure the `Update Shipping Zone Locations` action,
see [Action examples](https://docs.cloud.google.com/integration-connectors/docs/connectors/woocommerce/configure.md.txt#actionexamples-exp).

## Action examples

This section describes how to perform some of the actions in this connector.

### Example - Update Shipping Zone Locations

This example Update the locations for a shipping zone.

1. In the `Configure connector task` dialog, click `Actions`.
2. Select the `Update Shipping Zone Locations` action, and then click **Done**.
3. In the **Task Input** section of the **Connectors** task, click `connectorInputPayload` and then enter a value similar to the following in the `Default Value` field:

   ```json
   {
       "ZoneId": "7",
       "Locations": "[{\"code\":\"BR:SP\",\"type\":\"state\"}]"
     }
   ```
4. If the action is successful, the `Update Shipping Zone Locations` task's `connectorOutputPayload` response parameter will have a value similar to the following:

```json
[ { "code": "BR:SP", "type": "state",
    "_links_collection_href": "https://your-website.com/wp-json/wc/v3/shipping/zones/7/locations", 
    "_links_describes_href": "https://your-website.com/wp-json/wc/v3/shipping/zones/7", 
    "success": "true" } ]
```

## Entity operation examples

### Example - List records of an entity

This example lists the records of an `Orders` entity.

1. In the `Configure connector task` dialog, click `Entities`.
2. Select `Orders` from the `Entity` list.
3. Select the `List` operation, and then click **Done**.
4. In the **Task Input** section of the **Connectors** task, you can set the **filterClause** as per your requirement.

   <br />

   For example, setting the filter clause to
   `Id='891'`, lists only those records
   whose order Id is 891.

### Example - Get a single record from an entity

This example fetches a record from the `Orders` entity.

1. In the `Configure connector task` dialog, click `Entities`.
2. Select `Orders` from the `Entity` list.
3. Select the `Get` operation, and then click **Done**.
4. In the **Task Input** section of the **Connectors** task, click **entityId** and then enter `891` in the **Default Value** field.

   Here, `891` is an unique identifier for the resource `Orders` entity.

### Example - Delete a record from an entity

This example deletes a record from the `Orders` entity.

1. In the `Configure connector task` dialog, click `Entities`.
2. Select `Orders` from the `Entity` list.
3. Select the `Delete` operation, and then click **Done**.
4. In the **Task Input** section of the **Connectors** task, click **entityId** and then enter `891` in the **Default Value** field.

   Alternately, if the entity has composite primary keys instead of specifying the **entityId** , you can
   set the **filterClause** . For example, `Id='891'`.

### Example - Create a record in an entity

This example creates a record in the `Orders` entity.

1. In the `Configure connector task` dialog, click `Entities`.
2. Select `Orders` from the `Entity` list.
3. Select the `Create` operation, and then click **Done**.
4. In the **Task Input** section of the **Connectors** task, click `connectorInputPayload` and then enter a value similar to the following in the `Default Value` field:

   ```json
   {
   "BillingFirstName": "Alex",
   "BillingLastName": "Smith",
   "Status":"processing",
   "CustomerId": 1,
   "ShippingAddress1":"809/2 Downtown, Alaska, United States"
   }
   ```
5. If the integration is successful, the connector task's `connectorOutputPayload` field will have the response of the create operation.

```json
{ 
"Id": 1010 
}
```

### Example - Update a record in an entity

This example updates a record in the `Orders` entity.

1. In the `Configure connector task` dialog, click `Entities`.
2. Select `Orders` from the `Entity` list.
3. Select the `Update` operation, and then click **Done**.
4. In the **Task Input** section of the **Connectors** task, click `connectorInputPayload` and then enter a value similar to the following in the `Default Value` field:

   ```json
   {
   "Status": "on-hold"
   }
   ```
5. In the **Task Input** section of the **Connectors** task, click **entityId** and then enter `1010` in the **Default Value** field.
6. If the integration is successful, the connector task's `connectorOutputPayload` field will have the response of the update operation.

```json
{
"Id": 1010
}
```