# Asana

Use the Asana connector to perform insert, delete, update, and read operations on Asana.

## Before you begin

Before using the Asana connector, do the following tasks:

- In your Google Cloud project:
  - Ensure that network connectivity is set up. For information about network patterns, see [Network connectivity](https://docs.cloud.google.com/integration-connectors/docs/network-connectivity-private.md.txt).
  - Grant the [roles/connectors.admin](https://docs.cloud.google.com/integration-connectors/docs/connectors-access-permissions.md.txt#iam-roles-for-integration-connectors) IAM role to the user configuring the connector.
  - Grant the following IAM roles to the service account that you want to use for the connector:
    - `roles/secretmanager.viewer`
    - `roles/secretmanager.secretAccessor`

    A service account is a special type of Google account intended to represent a non-human
    user that needs to authenticate and be authorized to access data in Google APIs.
    If you don't have a service account, you must create a service account. The connector and the service account must belong to the same project. For more
    information, see
    [Creating a service account](https://docs.cloud.google.com/iam/docs/creating-managing-service-accounts#creating).
  - Enable the following services:
    - `secretmanager.googleapis.com` (Secret Manager API)
    - `connectors.googleapis.com` (Connectors API)

    To understand how to enable services, see [Enabling services](https://docs.cloud.google.com/service-usage/docs/enable-disable.md.txt#enabling).


  If these services or permissions have not been enabled for your project previously, you are prompted to enable them
  when configuring the connector.

## Configure the connector

A connection is specific to a data source. It
means that if you have many data sources, you must create a separate connection
for each data source. To create a connection, do the following:

1. In the [Cloud console](https://console.cloud.google.com), go to the **Integration Connectors \> Connections** page and then select or create a Google Cloud project.


   [Go to the Connections page](https://console.cloud.google.com/connectors/connections)
2. Click **+ Create new** to open the **Create Connection** page.
3. In the **Location** section, choose the location for the connection.
   1. **Region** : Select a location from the drop-down list.

      Supported regions for connectors include:


      For the list of all the supported regions, see [Locations](https://docs.cloud.google.com/integration-connectors/docs/locations.md.txt).
   2. Click **Next**.
4. In the **Connection Details** section, complete the following:
   1. **Connector** : Select **Asana** from the drop down list of available Connectors.
   2. **Connector version**:Select the Connector version from the drop down list of available versions.
   3. In the **Connection Name** field, enter a name for the Connection instance.

      Connection names must meet the following criteria:
      - Connection names can use letters, numbers, or hyphens.
      - Letters must be lower-case.
      - Connection names must begin with a letter and end with a letter or number.
      - Connection names cannot exceed 49 characters.
   4. Optionally, enter a **Description** for the connection instance.
   5. **Service Account** : Select a service account that has the [required roles](https://docs.cloud.google.com/integration-connectors/docs/connectors/asana/configure.md.txt#before-you-begin).
   6. Optionally, configure the **Connection node settings** :


      - **Minimum number of nodes**: Enter the minimum number of connection nodes.
      - **Maximum number of nodes**: Enter the maximum number of connection nodes.

      A node is a unit (or replica) of a connection that processes transactions.
      More nodes are required to process more transactions for a connection and conversely,
      fewer nodes are required to process fewer transactions.
      To understand how the nodes affect your connector pricing, see
      [Pricing for connection nodes](https://docs.cloud.google.com/integration-connectors/docs/pricing#pricing-for-connection-nodes). If you don't enter any values, by default
      the minimum nodes are set to 2 (for better availability) and the maximum nodes are set to 50.

   > [!NOTE]
   > **Note:** You can customize the connection node values only if you are a Pay-as-you-go customer.

   7. (Optional) In the **Advanced settings** section, select the **Use proxy** checkbox to configure a proxy server for the connection and configure the following values:
      - **Proxy Auth Scheme** : Select the authentication type to authenticate with the proxy server. The following authentication types are supported:
        - **Basic**: Basic HTTP authentication.
        - **Digest**: Digest HTTP authentication.
      - **Proxy User**: A user name to be used to authenticate with the proxy server.
      - **Proxy Password**: The Secret manager secret of the user's password.
      - **Proxy SSL Type** : The SSL type to use when connecting to the proxy server. The following authentication types are supported:
        - **Auto**: Default setting. If the URL is an HTTPS URL, then the Tunnel option is used. If the URL is an HTTP URL, then the NEVER option is used.
        - **Always**: The connection is always SSL enabled.
        - **Never**: The connection is not SSL enabled.
        - **Tunnel**: The connection is through a tunneling proxy. The proxy server opens a connection to the remote host and traffic flows back and forth through the proxy.
      - In the **Proxy Server** section, enter details of the proxy server.
        1. Click **+ Add destination**.
        2. Select a **Destination Type** .
           - **Host address** : Specify the hostname or IP address of the destination.

             If you want to establish a private connection to your backend system, do the following:
             - Create a [PSC service attachment](https://docs.cloud.google.com/integration-connectors/docs/configure-psc).
             - Create an [endpoint attachment](https://docs.cloud.google.com/integration-connectors/docs/create-ep-attachment) and then enter the details of the endpoint attachment in the **Host address** field.
   8. Optionally, click **+ Add label** to add a label to the Connection in the form of a key/value pair.
   9. Click **Next**.
5. In the **Authentication** section, enter the authentication details.
   1. Select an **Authentication type** and enter the relevant details.

      The following authentication types are supported by the Asana connection:
      - Personal Access Token

      <!-- -->

      - OAuth 2.0 Authorization code
   2. To understand how to configure these authentication types, see [Configure authentication](https://docs.cloud.google.com/integration-connectors/docs/connectors/asana/configure.md.txt#configure-auth).
   3. Click **Next**.
6. **Review**: Review your connection and authentication details.
7. Click **Create**.

### Configure authentication

Enter the details based on the authentication you want to use.

- **Personal Access Token**
  - **Personal Access Token** : A Personal Access Token (PAT) allows you to access Asana platform. For more information, see [Personal access token](https://developers.asana.com/docs/personal-access-token).
  - **Secret version:**Secret Manager secret version for the PAT secret.

<!-- -->

- **OAuth 2.0 Auth Code Grant**
  - **Client ID:**The client ID to authenticate with Asana.
  - **OAuth scopes:** A comma-separated list of OAuth scopes. Provides access to all endpoints documented in the Asana API reference documentation. For information about the available scopes, see [OAuth scopes](https://developers.asana.com/docs/oauth#oauth-scopes) in the Asana documentation.
  - **Client secret:** Select the [Secret Manager secret](https://docs.cloud.google.com/secret-manager/docs/create-secret-quickstart.md.txt). You must create the Secret Manager secret before configuring this authorization.
  - **Secret version:**Secret Manager secret version for client secret.
  - For the `Authorization code` authentication type, after creating the connection, you must perform a few additional steps for configuring authentication. For more information, see [Additional steps after connection creation](https://docs.cloud.google.com/integration-connectors/docs/connectors/asana/configure.md.txt#add-steps).

  > [!NOTE]
  > When you configure your third-party OAuth application, use this **authorized redirect URI** (callback URL):
  >
  > `https://console.cloud.google.com//connectors/oauth?project=PROJECT_ID`
  >
  > Replace `PROJECT_ID` with your Google Cloud project ID.

  > [!NOTE]
  > **Note:** If you are using `Authorization code` authentication type and have made any configuration changes in your Asana application, you must re-authorize your Asana connection. To understand how to re-authorize, see [Re-authorization for Authorization code](https://docs.cloud.google.com/integration-connectors/docs/connectors/asana/configure.md.txt#re-auth).

### Additional steps after connection creation

If you selected `OAuth 2.0 - Authorization code` for
authentication, you must do the following additional steps after creating the connection:

1. In the [Connections page](https://console.cloud.google.com/connectors/connections), locate the newly created connection.

   Notice that the **Status** for the new connector will be **Authorization required**.
2. Click **Authorization required** .

   This shows the **Edit authorization** pane.
3. Copy the **Redirect URI** value to your external application.
4. Verify the authorization details.
5. Click **Authorize** .

   If the authorization is successful, the connection status will be set to **Active** in the
   [Connections page](https://console.cloud.google.com/connectors/connections).

## Re-authorization for authorization code

If you are using `Authorization code` authentication type and have made any configuration changes in your Asana application,
you must re-authorize your Asana connection. To re-authorize a connection, perform the following steps:

1. Click on the required connection in the [Connections page](https://console.cloud.google.com/connectors/connections).

   This opens the connection details page.
2. Click **Edit** to edit the connection details.
3. Verify the **OAuth 2.0 - Authorization code** details in the **Authentication** section.

   If required, make the necessary changes.
4. Click **Save**. This takes you to the connection details page.
5. Click **Edit authorization** in the **Authentication** section. This shows the **Authorize** pane.
6. Click **Authorize** .

   If the authorization is successful, the connection status will be set to **Active** in the [Connections page](https://console.cloud.google.com//connectors/connections).

## System limitations

The Asana connector can process 90 transactions per *minute* ,
per [node](https://docs.cloud.google.com/integration-connectors/docs/pricing#payg),
and [throttles](https://docs.cloud.google.com/integration-connectors/docs/rate-limiting.md.txt) any transactions
beyond this limit.
By default, Integration Connectors allocates 2 nodes (for better availability) for a connection.

For information on the limits applicable to Integration Connectors, see [Limits](https://docs.cloud.google.com/integration-connectors/docs/quotas.md.txt).

> [!NOTE]
> **Note:** The number of [Integration Connectors nodes](https://docs.cloud.google.com/integration-connectors/docs/pricing#pricing-for-connection-nodes) will autoscale dynamically based on your usage. However, if you want to reserve capacity for large volumes without waiting for autoscaling, you can adjust the minimum node value for a connection. More nodes are required to process more transactions for a connection. Conversely, fewer nodes are required if a connection processes fewer transactions. To configure the node values, do the following:
>
> - If you are a pay-as-you-go customer, configure the minimum and maximum node value in the edit connection page.
> - If you are a subscription based customer, [contact support](https://docs.cloud.google.com/integration-connectors/docs/getting-support.md.txt).
>
> The maximum transactions that a node can handle depends on various factors. So, before adjusting the minimum nodes for better throughput,
> it is recommended you check if your backend systems are set up optimally to handle the required traffic.

## Use the Asana connection in an integration

After you create the connection, it becomes available in both
Apigee Integration and Application Integration. You can use the connection
in an integration through the Connectors task.

- To understand how to create and use the Connectors task in Apigee Integration, see [Connectors task](https://docs.cloud.google.com/apigee/docs/api-platform/integration/connectors-task#configure-the-connectors-task).
- To understand how to create and use the Connectors task in Application Integration, see [Connectors task](https://docs.cloud.google.com/application-integration/docs/connectors-task).

## Entities, operations, and actions


All the Integration Connectors provide a layer of abstraction for the objects of
the connected application. You can access an application's objects only through
this abstraction. The abstraction is exposed to you as entities, operations, and actions.

> [!NOTE]
> **Note:** You can view the entities, operations, and actions of a connector in the [Connectors task](https://docs.cloud.google.com/application-integration/docs/connectors-task).

- **Entity:** An entity can be thought of as an object, or a collection of properties, in the connected application or service. The definition of an entity differs from a connector to a connector. For example, in a database connector, tables are the entities, in a file server connector, folders are the entities, and in a messaging system connector, queues are the entities.

  However, it is possible that a connector doesn't support or have any entities, in which case the
  `Entities` list will be empty.
- **Operation:** An operation is the activity that you can perform on an entity. You can perform any of the following operations on an entity:
  - [List](https://docs.cloud.google.com/application-integration/docs/configure-connectors-task.md.txt#config-prop)
  - [Get](https://docs.cloud.google.com/application-integration/docs/configure-connectors-task.md.txt#config-prop)
  - [Create](https://docs.cloud.google.com/application-integration/docs/configure-connectors-task.md.txt#config-prop)
  - [Update](https://docs.cloud.google.com/application-integration/docs/configure-connectors-task.md.txt#config-prop)
  - [Delete](https://docs.cloud.google.com/application-integration/docs/configure-connectors-task.md.txt#config-prop)

  Selecting an entity from the available list, generates a list of
  operations available for the entity. For a detailed description of the operations, see the Connectors task's
  [entity operations](https://docs.cloud.google.com/application-integration/docs/connectors-task#config-prop).
  However, if a connector doesn't support any of the entity operations, such unsupported
  operations aren't listed in the `Operations` list.
- **Action:** An action is a first class function that is made available to the integration through the connector interface. An action lets you make changes to an entity or entities, and vary from connector to connector. Normally, an action will have some input parameters, and an output parameter. However, it is possible that a connector doesn't support any action, in which case the `Actions` list will be empty.

> [!NOTE]
> **Note:** All entities and actions will have a schema associated with them. For example, an action schema will have the parameter details such as; the parameter names, and its corresponding data type. The schema (metadata) for entities and actions is fetched by the connection at runtime from your backend. If there are any updates to the schema, such updates won't be automatically reflected in your existing connections; you must manually refresh the schema. To refresh the schema for a connection, open the **Connection details** page of the connection, and then click **Refresh connection schema**.

## Actions

The Asana connector supports actions, such as the following: AddDependenciesToTask, AddDependentsToTask, AddFollowers, AddProjectToTask, AddTagsToTask, AddTaskToSection, DownloadAttachment, DuplicateProject, DuplicateTask, RemoveDependenciesFromTask, RemoveDependentsFromTask, RemoveFollowers, RemoveProjectsFromTask, RemoveTagsFromTask, SetParentofTask, and UploadAttachment.
To understand how to configure the actions, see [Action examples](https://docs.cloud.google.com/integration-connectors/docs/connectors/asana/configure.md.txt#actionexamples-exp).

<br />

## Action examples

This section describes how to perform some of the actions in this connector.

### Example - Add dependencies to a task

This example adds a dependency to a task.

1. In the `Configure connector task` dialog, click `Actions`.
2. Select the `AddDependenciesToTask` action, and then click **Done**.
3. In the **Task Input** section of the **Connectors** task, click `connectorInputPayload` and then enter a value similar to the following in the `Default Value` field:

   ```json
     {
       "TaskId": "12345678",
       "Dependencies": "12345678"
     }
   ```

## Entity operation examples

### Example - List all the tasks

This example lists all the tasks in the `Tasks` entity.

1. In the `Configure connector task` dialog, click `Entities`.
2. Select Tasks from the `Entity` list.
3. Select the `LIST` operation, and then click **Done**.

### Example - Get tasks based on a project ID

This example gets the tasks with that match the project ID "xyz" from the `Tasks` entity.

1. In the `Configure connector task` dialog, click `Entities`.
2. Select `Tasks` from the `Entity` list.
3. Select the `LIST` operation, and then click **Done**.
4. In the **Task Input** section of the **Connectors** task, click **filterClause** and then enter `ProjectId='xyz'` in the **Default Value** field.

### Example - Create a task

This example creates a task in the `Tasks` entity.

1. In the `Configure connector task` dialog, click `Entities`.
2. Select `Tasks` from the `Entity` list.
3. Select the `Create` operation, and then click **Done**.
4. In the **Task Input** section of the **Connectors** task, click `connectorInputPayload` and then enter a value similar to the following in the `Default Value` field:

   ```json
   {
       "Name": "Testing",
       "ProjectId": "1208019929422674"
     }
     
   ```

   If the integration is successful, your connector task's `connectorOutputPayload` field will have a
   value similar to the following:

   ```json
    {
       "Id": "10032"
     } 
     
   ```

### Example - Update a task in an entity

This example updates a task in the `Tasks` entity.

1. In the `Configure connector task` dialog, click `Entities`.
2. Select `Tasks` from the `Entity` list.
3. Select the `Update` operation, and then click **Done**.
4. In the **Task Input** section of the **Connectors** task, click `connectorInputPayload` and then enter a value similar to the following in the `Default Value` field:

   ```json
   {
       "Assignee": "1206551913340659"
     }
   ```
5. In the **Task Input** section of the **Connectors** task, click **entityId** and then enter `1010` in the **Default Value** field.
6. If the integration is successful, the connector task's `connectorOutputPayload` field will have the response of the update operation.

```json
{
  "Id": 1010
  }
```

## Create connections using Terraform

You can use the [Terraform
resource](https://registry.terraform.io/providers/hashicorp/google/latest/docs/resources/integration_connectors_connection) to create a new connection.

To learn how to apply or remove a Terraform configuration, see
[Basic Terraform commands](https://docs.cloud.google.com/docs/terraform/basic-commands.md.txt).

To view a sample terraform template for connection creation, see [sample template](https://docs.cloud.google.com/integration-connectors/docs/sample-terraform-template.md.txt).

When creating this connection by using Terraform, you must set the following variables in your Terraform configuration file:

| Parameter name | Data type | Required | Description |
|---|---|---|---|
| proxy_enabled | BOOLEAN | False | Configures a proxy server for the connection. |
| proxy_auth_scheme | ENUM | False | The authentication type to use to authenticate to the ProxyServer proxy. Supported values are: BASIC, DIGEST, NONE |
| proxy_user | STRING | False | A user name to be used to authenticate to the ProxyServer proxy. |
| proxy_password | SECRET | False | A password to be used to authenticate to the ProxyServer proxy. |
| proxy_ssltype | ENUM | False | The SSL type to use when connecting to the ProxyServer proxy. Supported values are: AUTO, ALWAYS, NEVER, TUNNEL |

## Get help from the Google Cloud community

You can post your questions and discuss this connector in the Google Cloud community at [Cloud Forums](https://www.googlecloudcommunity.com/gc/Integration-Services/bd-p/cloud-integration-services).

## What's next

- Understand how to [suspend and resume a connection](https://docs.cloud.google.com/integration-connectors/docs/suspend-resume-connection.md.txt).
- Understand how to [monitor connector usage](https://docs.cloud.google.com/integration-connectors/docs/cloud-monitoring.md.txt).
- Understand how to [view connector logs](https://docs.cloud.google.com/integration-connectors/docs/view-connector-logs.md.txt).