> [!WARNING]
>
> **Preview
> --- Eventarc for GKE destinations**
>
>
> This feature is
>
> subject to the "Pre-GA Offerings Terms" in the General Service Terms section of the
> [Service Specific
> Terms](https://docs.cloud.google.com/terms/service-terms#1).
>
> Pre-GA features are available "as is" and might have limited support.
>
> For more information, see the
> [launch stage descriptions](https://cloud.google.com/products/#product-launch-stages).

An Eventarc trigger declares your interest in a certain event or set
of events. You can configure event routing by specifying filters for the trigger,
including the event source, and the target Google Kubernetes Engine (GKE) service
running in a GKE cluster. Note that targets can only include
services running in (public or private) GKE clusters with
public endpoints. To target services in GKE clusters with
private endpoints, route events to
[internal HTTP endpoints](https://docs.cloud.google.com/eventarc/standard/docs/vpc-endpoints/route-vpc-internal-endpoint-events.md.txt).

Eventarc delivers events to the event receiver in a
[CloudEvents format](https://docs.cloud.google.com/eventarc/docs/cloudevents.md.txt) through an HTTP request.

Cloud Firestore supports
[Auth Context](https://github.com/cloudevents/spec/blob/main/cloudevents/extensions/authcontext.md)
as an extension attribute to the CloudEvents format. When you create a trigger,
you can apply this event type attribute to filter events with authentication
information.

These instructions show you how to configure event routing to your
GKE service that is triggered by a direct
Cloud Firestore event. For more details, see the list of
[supported direct events](https://docs.cloud.google.com/eventarc/docs/reference/supported-events.md.txt#cloud-firestore-preview).

> [!NOTE]
> **Note:** If both direct and audit log events are supported for a Google provider, we recommend that you create a trigger that filters for the direct event. Direct events offer a number of advantages over audit log events. For more information, see [Event routes](https://docs.cloud.google.com/eventarc/standard/docs/run/event-routing-options.md.txt).

## Before you begin

You must enable *Workload Identity Federation for GKE* on the GKE cluster
**and** node pool that the destination service is running on.
Workload Identity Federation for GKE is required to properly set up the *event forwarder* and
is the recommended way to access Google Cloud services from applications
running within GKE due to its improved security properties and
manageability.

<br />

![Eventarc events to GKE targets architecture](https://docs.cloud.google.com/static/eventarc/images/eventarc-gke-arch.svg)

<br />

### Workload Identity Federation for GKE

Applications running on GKE might need access to
Google Cloud APIs. Workload Identity Federation for GKE allows a Kubernetes service account
in your GKE cluster to act as an [IAM service
account](https://docs.cloud.google.com/iam/docs/service-accounts). Pods that use the configured Kubernetes
service account automatically authenticate as the IAM service
account when accessing Google Cloud APIs. Using Workload Identity Federation for GKE
lets you assign distinct, fine-grained identities and authorization for
each application in your cluster. Note that specific permissions must be granted
to the Eventarc trigger's service account. In this document,
see the steps to [create a service account](https://docs.cloud.google.com/eventarc/standard/docs/gke/route-trigger-cloud-firestore.md.txt#preparing).

For more information on enabling and configuring Workload Identity Federation for GKE on
your GKE clusters, refer to
[Authenticate to Google Cloud APIs from GKE workloads](https://docs.cloud.google.com/kubernetes-engine/docs/how-to/workload-identity.md.txt).

### Event forwarder

Eventarc's event forwarder pulls new events from
Eventarc and forwards them to the GKE
destination. This component acts as a mediator between the Pub/Sub
transport layer and the GKE service. It works on existing
services and also supports signaling services (including those not exposed
outside of the fully-managed cluster) while simplifying setup and maintenance.
At a networking level, to receive events in a GKE service, you
don't need to open the service to external traffic as all events are delivered
from an origin that resides within the same GKE cluster.

Note that the event forwarder's lifecycle is managed by Eventarc,
and if you accidentally delete the event forwarder, Eventarc
will restore this component.

For each trigger pointing to a GKE destination, the event
forwarder (a specifically configured `gke-forwarder` pod) does the following:

1. It uses the Pub/Sub API to open a
   [`StreamingPull` connection](https://docs.cloud.google.com/pubsub/docs/reference/rpc/google.pubsub.v1.md.txt#streamingpullrequest)
   to the trigger transporter (a Pub/Sub topic and subscription)
   and receives events as they become available.

2. It transforms events to the correct
   [CloudEvents format](https://docs.cloud.google.com/eventarc/docs/cloudevents.md.txt) and encodes and delivers them
   as an `HTTP POST` request to the target GKE service.

The Eventarc service agent needs the permission to run and
regularly update the `gke-forwarder` instance. This permission must be granted
once per project. For details, in this document, see
[Enable GKE destinations](https://docs.cloud.google.com/eventarc/standard/docs/gke/route-trigger-cloud-firestore.md.txt#enable-gke-destinations).

### Troubleshooting

To resolve issues that you might encounter when using Eventarc for
GKE, see
[Troubleshoot Eventarc for Google Kubernetes Engine (GKE)](https://docs.cloud.google.com/eventarc/standard/docs/gke/troubleshooting.md.txt).

## Prepare to create a trigger

For each trigger that targets a GKE service,
Eventarc creates an event forwarder component. Eventarc
requires permissions to install the component and manage resources in the
GKE cluster. Before creating an Eventarc
trigger for GKE destinations, ensure that you
complete the following tasks.

### Console

1. In the Google Cloud console, on the project selector page, select or
   [create a Google Cloud project](https://docs.cloud.google.com/resource-manager/docs/creating-managing-projects.md.txt).

   > [!NOTE]
   > **Note:** If you don't plan to keep the resources that you create in this procedure, create a project instead of selecting an existing project. After you finish these steps, you can delete the project, removing all resources associated with the project.


   [Go to project selector](https://console.cloud.google.com/projectselector2/home/dashboard)

   <br />

2. Enable the Eventarc, Eventarc Publishing,
   Google Kubernetes Engine, and Resource Manager APIs.

   [Enable the APIs](https://console.cloud.google.com/apis/enableflow?apiid=eventarc.googleapis.com,eventarcpublishing.googleapis.com,cloudresourcemanager.googleapis.com,container.googleapis.com)

   <br />

3. If applicable, enable the API related to the direct events. For example,
   for Cloud Firestore events, enable the
   Cloud Firestore API.

4. If you don't already have one, create a user-managed service account,
   then grant it the roles and permissions necessary so that
   Eventarc can manage events for your target service.

   1. In the Google Cloud console, go to the **Create service account**
      page.


      [Go to Create service account](https://console.cloud.google.com/projectselector/iam-admin/serviceaccounts/create?supportedpurview=project)

      <br />

   2. Select your project.

   3. In the **Service account name** field, enter a name. The Google Cloud console
      fills in the **Service account ID** field based on this name.

      In the **Service account description** field, enter a description. For
      example, `Service account for event trigger`.
   4. Click **Create and continue**.

   5. To provide appropriate access, in the **Select a role** list, select
      the required Identity and Access Management (IAM) roles to grant to your service
      account. For more information, see
      [Roles and permissions for GKE targets](https://docs.cloud.google.com/eventarc/standard/docs/gke/roles-permissions.md.txt).

      For additional roles, click
      **Add another role** and add each additional role.
   6. Click **Continue**.

   7. To finish creating the account, click **Done**.

### gcloud

1.


   In the Google Cloud console, activate Cloud Shell.

   [Activate Cloud Shell](https://console.cloud.google.com/?cloudshell=true)


   At the bottom of the Google Cloud console, a
   [Cloud Shell](https://docs.cloud.google.com/shell/docs/how-cloud-shell-works.md.txt)
   session starts and displays a command-line prompt. Cloud Shell is a shell environment
   with the Google Cloud CLI
   already installed and with values already set for
   your current project. It can take a few seconds for the session to initialize.

   <br />

2. Enable the Eventarc, Eventarc Publishing,
   Google Kubernetes Engine, and Resource Manager APIs.

   ```bash
   gcloud services enable eventarc.googleapis.com \
       eventarcpublishing.googleapis.com \
       container.googleapis.com \
       cloudresourcemanager.googleapis.com
   ```

   <br />

3. If applicable, enable the API related to the direct events. For example,
   for Cloud Firestore events, enable
   `firestore.googleapis.com`.

4. If you don't already have one, create a user-managed service account,
   then grant it the roles and permissions necessary so that
   Eventarc can manage events for your target GKE
   destination.

   1. Create the service account:

      ```bash
      gcloud iam service-accounts create SERVICE_ACCOUNT_NAME
      ```

      Replace `SERVICE_ACCOUNT_NAME` with the name of the service account.
      It must be between 6 and 30 characters, and can contain lowercase
      alphanumeric characters and dashes. After you create a service account, you
      cannot change its name.
   2. Grant the required Identity and Access Management (IAM) roles or permissions.
      For more information, see
      [Roles and permissions for GKE targets](https://docs.cloud.google.com/eventarc/standard/docs/gke/roles-permissions.md.txt).

## Enable GKE destinations

To allow Eventarc to manage resources in the GKE
cluster, enable GKE destinations, and bind the
Eventarc service agent with the required roles.

1. Enable GKE destinations for Eventarc:

   ```bash
   gcloud eventarc gke-destinations init
   ```
2. At the prompt to bind the required roles, enter `y`.

   The following roles are bound:
   - `roles/compute.viewer`
   - `roles/container.developer`
   - `roles/iam.serviceAccountAdmin`

## Create a trigger

You can create an Eventarc trigger using the Google Cloud CLI
or through the Google Cloud console.


> [!NOTE]
> **Note:** Filtering is done through an exact match and does not support wildcards or regular expressions. However, you can use the `--event-filters-path-pattern` flag in the following gcloud CLI command, or define a path pattern through the console. For more information, see [Understand path patterns](https://docs.cloud.google.com/eventarc/docs/path-patterns.md.txt).

<br />

### Console

1. In the Google Cloud console, go to the Eventarc **Triggers** page.

   [Go to Triggers](https://console.cloud.google.com/eventarc/triggers)
2. Click **Create trigger**.
3. Type a **Trigger name** .

   This is the ID of the trigger and it must start with a letter. It can
   contain up to 63 lowercase letters, numbers, or hyphens.
4. For the **Trigger type** , select **Google sources**.
5. In the **Event provider** list, select **Cloud Firestore** .

   Note that the event provider name used in the associated
   [Google Cloud documentation](https://docs.cloud.google.com/docs) might not have a prefix
   of *Cloud* or *Google Cloud* . For example, on the console,
   *Memorystore for Redis* is referred to as
   **Google Cloud Memorystore for Redis**.
6. In the **Event type** list, from the *Direct* events, select an event type.
7. In the **Event data content type** list, select the encoding of the event payload.

   For direct events from Cloud Firestore,
   this must be **application/protobuf** and the event data is a
   byte array. For more information about the protobuf messages for Cloud
   Firestore events, see
   [Common events](https://docs.cloud.google.com/eventarc/docs/cloudevents-json.md.txt#common-events).

8. In the **Region** list, select the same region as the Google Cloud service that is generating events.

   For more information, see
   [Eventarc locations](https://docs.cloud.google.com/eventarc/docs/locations.md.txt).
9. If applicable to the event provider, click **Add filter** and specify the following:
   1. In the **Attribute 1** field, depending on the direct event you chose, select a [resource ID](https://docs.cloud.google.com/apis/design/resource_names) that can act as an event filter.
   2. Select an operator:
      - **Equal**
      - **Path pattern** : applicable to `document` (Native mode) and `entity` (Datastore mode) resources. Use wildcards to respond to changes that match a pattern. A wildcard `*` matches a single segment and a multi-segment wildcard `**` matches zero or more segments in the pattern. Don't specify a leading slash---for example:

        |---|---|
        | `users/*` or `users/{userId}` | Matches all documents in the `/users` collection. Does not match documents in sub-collections like `/users/marie/messages/33e2IxYBD9enzS50SJ68` |
        | `users/**` | Matches all documents in the `/users` collection and documents in subcollections like `/users/marie/messages/33e2IxYBD9enzS50SJ68` |

        For more information, see[Understand path patterns](https://docs.cloud.google.com/eventarc/docs/path-patterns.md.txt).
   3. In the **Attribute value 1** field, depending on the operator that you chose, type the exact value or apply a path pattern.
   4. If more attribute filters are applicable, click **Add filter** and specify the appropriate values.
10. Select the **Service account** that will invoke your service or workflow.

    Or, you can create a new service account.

    This specifies the Identity and Access Management (IAM) service account email
    associated with the trigger and to which you previously granted
    [specific roles](https://docs.cloud.google.com/eventarc/standard/docs/access-control.md.txt) required
    by Eventarc.
11. In the **Event destination** list, select **Kubernetes Engine**.
12. Select a service.  

    This is the name of the service that receives the events for the trigger.
    The service must be in the same project as the trigger and will receive
    events as HTTP POST requests sent to its root URL path (`/`),
    whenever the event is generated.
13. Optionally, you can specify the **Service URL path** to send the incoming request to.

    This is the relative path on the destination service to which the events
    for the trigger should be sent. For example: `/`, `/route`,
    `route`, `route/subroute`.
14. Optionally, to add a label, you can click **Add label** . Labels are key-value pairs that help you organize your Google Cloud resources. For more information, see [What are labels?](https://docs.cloud.google.com/resource-manager/docs/labels-overview.md.txt#what-are-labels)
15. Click **Create**.
16. After a trigger is created, the event source filters can't be modified. Instead, create a new trigger and delete the old one. For more information, see [Manage triggers](https://docs.cloud.google.com/eventarc/docs/managing-triggers.md.txt).

### gcloud

You can create a trigger by running a `gcloud eventarc triggers create`
command along with required and optional flags.

The flags differ depending
on whether you are running Firestore in Native mode or in
Datastore mode. For more information, see
[Choosing between Native mode and Datastore mode](https://docs.cloud.google.com/datastore/docs/firestore-or-datastore.md.txt).

#### Native mode

```bash
gcloud eventarc triggers create TRIGGER \
    --location=LOCATION \
    --destination-gke-cluster=DESTINATION_GKE_CLUSTER \
    --destination-gke-location=DESTINATION_GKE_LOCATION \
    --destination-gke-namespace=DESTINATION_GKE_NAMESPACE \
    --destination-gke-service=DESTINATION_GKE_SERVICE \
    --destination-gke-path=DESTINATION_GKE_PATH \
    --event-filters="type=EVENT_FILTER_TYPE" \
    --event-filters="database=DATABASE" \
    --event-filters="namespace=NAMESPACE" \
    --event-filters-path-pattern="document=DOCUMENT" \
    --event-data-content-type="EVENT_DATA_CONTENT_TYPE" \
    --service-account=SERVICE_ACCOUNT_NAME@PROJECT_ID.iam.gserviceaccount.com"
```

#### Datastore mode

```bash
gcloud eventarc triggers create TRIGGER \
    --location=LOCATION \
    --destination-gke-cluster=DESTINATION_GKE_CLUSTER \
    --destination-gke-location=DESTINATION_GKE_LOCATION \
    --destination-gke-namespace=DESTINATION_GKE_NAMESPACE \
    --destination-gke-service=DESTINATION_GKE_SERVICE \
    --destination-gke-path=DESTINATION_GKE_PATH \
    --event-filters="type=EVENT_FILTER_TYPE" \
    --event-filters="database=DATABASE" \
    --event-filters="namespace=NAMESPACE" \
    --event-filters-path-pattern="entity=ENTITY" \
    --event-data-content-type="EVENT_DATA_CONTENT_TYPE" \
    --service-account=SERVICE_ACCOUNT_NAME@PROJECT_ID.iam.gserviceaccount.com"
```

Replace the following:

- `TRIGGER`: the ID of the trigger or a fully qualified identifier

<!-- -->

- `LOCATION`: the location of the
  Eventarc trigger. Alternatively, you can set the
  `eventarc/location` property; for example
  `gcloud config set eventarc/location us-central1`.

  Cloud Firestore triggers for Eventarc
  are only available in certain locations and the trigger must be in the
  same location as the Cloud Firestore database. For more
  information, see
  [Eventarc locations](https://docs.cloud.google.com/eventarc/docs/locations.md.txt) and
  [Cloud Firestore locations](https://firebase.google.com/docs/firestore/locations).

- `DESTINATION_GKE_CLUSTER`: the name of the GKE cluster in which the target GKE service that receives events is running.
- `DESTINATION_GKE_LOCATION`: (optional) the [Compute Engine region](https://docs.cloud.google.com/compute/docs/regions-zones.md.txt#available) of the GKE cluster in which the destination GKE service is running. If not specified, it is assumed that the cluster is a regional cluster and is in the same region as the trigger.
- `DESTINATION_GKE_NAMESPACE`: (optional) the namespace in which the destination GKE service is running. If not specified, the `default` namespace is used.
- `DESTINATION_GKE_SERVICE`: the name of the GKE service that receives the events for the trigger. The service can be in any of the GKE-supported locations and does not need to be in the same location as the trigger. However, the service must be in the same project as the trigger and will receive events as HTTP POST requests sent to its root URL path (`/`), whenever the event is generated.
- `DESTINATION_GKE_PATH`: (optional) the relative path you specify on the destination GKE service to which the events for the trigger should be sent. For example: `/`, `/route`, `route`, `route/subroute`.
- `EVENT_FILTER_TYPE`: the identifier of the event. An event is generated when an API call for the method succeeds. For long-running operations, the event is only generated at the end of the operation, and only if the action is performed successfully. For a list of supported event types, see [Google event types supported by Eventarc](https://docs.cloud.google.com/eventarc/docs/reference/supported-events.md.txt#directly-from-a-google-cloud-source).
Cloud Firestore supports the following event types in **Native mode only** .
  - `google.cloud.firestore.document.v1.created`: event is sent when a document is written to for the first time
  - `google.cloud.firestore.document.v1.created.withAuthContext`: event with authentication information attributes is sent when a document is written to for the first time
  - `google.cloud.firestore.document.v1.updated`: event is sent when a document already exists and has any value changed
  - `google.cloud.firestore.document.v1.updated.withAuthContext`: event with authentication information attributes is sent when a document already exists and has any value changed
  - `google.cloud.firestore.document.v1.deleted`: event is sent when a document is deleted
  - `google.cloud.firestore.document.v1.deleted.withAuthContext`: event with authentication information attributes is sent when a document is deleted
  - `google.cloud.firestore.document.v1.written`: event is sent when a document is created, updated, or deleted
  - `google.cloud.firestore.document.v1.written.withAuthContext`: event with authentication information attributes is sent when a document is created, updated, or deleted.
- Cloud Firestore supports the following event types in **Datastore mode only** . Data objects in Firestore in Datastore mode are known as *entities*.
  - `google.cloud.datastore.entity.v1.created`: event is sent when an entity is written to for the first time
  - `google.cloud.datastore.entity.v1.created.withAuthContext`: event with authentication information attributes is sent when an entity is written to for the first time
  - `google.cloud.datastore.entity.v1.updated`: event is sent when an entity already exists and has any value changed
  - `google.cloud.datastore.entity.v1.updated.withAuthContext`: event with authentication information attributes is sent when an entity already exists and has any value changed
  - `google.cloud.datastore.entity.v1.deleted`: event is sent when an entity is deleted
  - `google.cloud.datastore.entity.v1.deleted.withAuthContext`: event with authentication information attributes is sent when an entity is deleted
  - `google.cloud.datastore.entity.v1.written`: event is sent when an entity is created, updated, or deleted
  - `google.cloud.datastore.entity.v1.written.withAuthContext`: event with authentication information attributes is sent when an entity is created, updated, or deleted

<!-- -->

- `DATABASE`: the Firestore database. For the default database name, use `(default)`.
- `NAMESPACE` (optional): the Firestore database namespace. For the default namespace in Datastore mode, use `(default)`. If not specified, a wildcard match (`*`) to any occurrences is made.
- `DOCUMENT` (optional): applicable to database instances running in **Native mode only** . The database path from which you want to receive events from when data is created, updated, or deleted in that path. Don't specify a leading slash. The operator can be one of the following:
  - Equal; for example, `--event-filters="document=DOCUMENT"`
  - Path pattern; for example, `--event-filters-path-pattern="document=DOCUMENT"`.

    Use wildcards to respond to changes in documents that match a pattern.
    A wildcard `*` matches a single segment and a multi-segment wildcard
    `**` matches zero or more segments in the pattern---for example:

    |---|---|
    | `users/*` or `users/{userId}` | Matches all documents in the `/users` collection. Doesn't match documents in sub-collections like `/users/marie/messages/33e2IxYBD9enzS50SJ68` |
    | `users/**` | Matches all documents in the `/users` collection and documents in subcollections like `/users/marie/messages/33e2IxYBD9enzS50SJ68` |

    For more information, see [Understand path patterns](https://docs.cloud.google.com/eventarc/docs/path-patterns.md.txt).
- `ENTITY` (optional): applicable to database instances running in **Datastore mode only** . The database path from which you want to receive events from when data is created, updated, or deleted in that path. Don't specify a leading slash. The operator can be one of the following:
  - Equal; for example, `--event-filters="document=ENTITY"`
  - Path pattern; for example, `--event-filters-path-pattern="ENTITY=ENTITY"`

    For more information, see
    [Understand path patterns](https://docs.cloud.google.com/eventarc/docs/path-patterns.md.txt).

    Note that you might need to escape characters in kind IDs and entity
    IDs. Escaping a character lets the event filter correctly interpret
    the ID. For more information, see
    [Character
    escaping](https://docs.cloud.google.com/datastore/docs/extend-with-functions-2nd-gen#character_escaping).

<!-- -->

- `EVENT_DATA_CONTENT_TYPE`: the [encoding of the event payload](https://docs.cloud.google.com/eventarc/standard/docs/overview.md.txt#event-format). For direct events from Firestore, this must be `application/protobuf` and the event data is a byte array. For more information about the protobuf messages for Cloud Firestore events, see [Common events](https://docs.cloud.google.com/eventarc/docs/cloudevents-json.md.txt#common-events).
- `SERVICE_ACCOUNT_NAME`: the name of your user-managed service account.
- `PROJECT_ID`: your Google Cloud project ID.

Notes:

- For direct events from Cloud Firestore, the encoding of the event payload is `application/protobuf`.
- The `--event-filters="type=EVENT_FILTER_TYPE"` flag is required. If no other event filter is set, events for all resources are matched.
- `EVENT_FILTER_TYPE` cannot be changed after creation. To change `EVENT_FILTER_TYPE`, create a new trigger and delete the old one.
- Each trigger can have multiple event filters, comma delimited in one `--event-filters`=\[`ATTRIBUTE`=`VALUE`,...\] flag, or you can repeat the flag to add more filters. Only events that match all the filters are sent to the destination. Wildcards and regular expressions are not supported; however, when using the `--event-filters-path-pattern` flag, you can define a resource [path pattern](https://docs.cloud.google.com/eventarc/docs/path-patterns.md.txt).
- The `--service-account` flag is used to specify the Identity and Access Management (IAM) service account email associated with the trigger.

Example:

```
gcloud eventarc triggers create helloworld-trigger \
  --location=us-east1 \
  --destination-gke-cluster=gke-events-cluster \
  --destination-gke-location=us-east1-b \
  --destination-gke-namespace=default \
  --destination-gke-service=helloworld-events \
  --destination-gke-path=/ \
  --event-filters="type=google.cloud.firestore.document.v1.updated" \
  --event-filters="database=my-database" \
  --event-filters-path-pattern="document=users/my-document-*" \
  --event-data-content-type="application/protobuf" \
  --service-account=${SERVICE_ACCOUNT_NAME}@${PROJECT_ID}.iam.gserviceaccount.com
```

This command creates a trigger called `helloworld-trigger` for
the event identified as `google.cloud.firestore.document.v1.updated` in the
`my-database` database instance running in Native mode, and
filters events for `document` paths
that match `users/my-document-`.

> [!NOTE]
> **Note:** Although your trigger is created immediately, it can take up to two minutes for a trigger to propagate and filter events.

## List a trigger

You can confirm the creation of a trigger by listing Eventarc
triggers using the Google Cloud CLI or through the Google Cloud console.

### Console

1. In the Google Cloud console, go to the Eventarc
   **Triggers** page.


   [Go to Triggers](https://console.cloud.google.com/eventarc/triggers)

   <br />

   This page lists your triggers in all locations, and includes details such
   as names, regions, event providers, destinations, and more.
2. To filter your triggers:

   1. Click **Filter** or the **Filter triggers** field.
   2. In the **Properties** list, select an option to filter the triggers by.

   You can select a single property or use the logical operator `OR` to add
   more properties.
3. To sort your triggers, beside any supported column heading, click
   **Sort**.

### gcloud

Run the following command to list your triggers:

```bash
gcloud eventarc triggers list --location=-
```

This command lists your triggers in all locations, and includes details such
as names, types, destinations, and statuses.

## What's next

- [Learn more about using Eventarc and Cloud Firestore](https://docs.cloud.google.com/firestore/docs/eventarc).
- [Learn more about Eventarc](https://docs.cloud.google.com/eventarc/standard/docs/overview.md.txt).
- [Learn how to manage triggers](https://docs.cloud.google.com/eventarc/docs/managing-triggers.md.txt).