This page provides an overview of the Google Distributed Cloud (GDC) air-gapped VPN feature and describes the supported specifications and tunneling protocols.

GDC VPN securely extends a peer network to a user's
virtual machine (VM) in an organization of a GDC zone
through an Internet Protocol Security (IPsec) VPN connection.

Configure the GDC VPN using the `VPNGateway`,
`PeerGateway`, `VPNBGPPeer`, and `VPNTunnel` resources from the [Networking
API](https://docs.cloud.google.com/distributed-cloud/hosted/docs/1.16/gdcag/apis/service/networking/v1/networking-v1).

## Specifications

The GDC VPN has the following specifications:

- GDC VPN only supports site-to-site IPsec VPN connectivity. IPsec is a suite of protocols designed to secure communication over IP networks. Other VPN technologies, such as SSL and VPN are not supported.
- The peer VPN gateway must have a static external IPv4 address. You need this IP address to configure VPN.
- If your peer VPN gateway is behind a firewall rule, you must configure the firewall rule to pass both Encapsulating Security Payload (ESP) IPsec protocol and Internet Key Exchange (IKE) UDP 500 and UDP 4500 traffic to it.
- GDC VPN only supports one-to-one NAT by using UDP encapsulation for NAT-Traversal (NAT-T). The peer VPN gateway must be configured to identify itself using its static external IPv4 address, not its internal private IP.
- IPv6 traffic is not supported.

### IPsec and IKE support

GDC VPN supports IKEv2 by using an IKE pre-shared key
(shared secret) and IKE ciphers. GDC VPN only supports a
pre-shared key for authentication. When you create the
GDC VPN tunnel, specify a pre-shared key. When you
create the tunnel at the peer VPN gateway, specify this same pre-shared key. For more information, see [Create the secret with a PSK](https://docs.cloud.google.com/distributed-cloud/hosted/docs/1.16/gdcag/platform/pa-user/vpn/create-secret).

> [!NOTE]
> **Note:** Each tunnel achieves a throughput of up to 600 Mbps.

GDC VPN supports ESP in tunnel mode with authentication, but does not support AH or ESP in transport mode.

## What's next

- [Create a VPN gateway and peer gateway](https://docs.cloud.google.com/distributed-cloud/hosted/docs/1.16/gdcag/platform/pa-user/vpn/configure-the-gateways)