This page describes how to order Google Distributed Cloud connected hardware. Distributed Cloud connected is available in the following countries: - Australia - Austria - Belgium - Brazil - Canada - Denmark - Finland - France - Germany - Hong Kong - Japan - India - Indonesia - Italy - Netherlands - Norway - Poland - Saudi Arabia - Singapore - South Korea - Spain - Sweden - Switzerland - United Kingdom - United States Before you order the hardware, you must meet the [Distributed Cloud connected installation requirements](https://docs.cloud.google.com/distributed-cloud/connected/1.7.1/docs/requirements). ## Order Distributed Cloud connected hardware using the Google Cloud console 1. In the Google Cloud console, go to the **Orders** page. [Go to Orders](https://console.cloud.google.com/distributed-cloud/edgezones/order-management/orders?project=_)
2. Select the target Google Cloud project. 3. Click **Create order**. 4. Fill out the request form and submit it. A Google Cloud sales representative reviews your submission and contacts you to complete the order. The representative does the following: - Reviews your business requirements to help you pick the optimal hardware configuration. - Collects information about your local network, Google Cloud project, installation site, and other requirements listed in the [installation requirements](https://docs.cloud.google.com/distributed-cloud/connected/1.7.1/docs/requirements). - Uses this information to configure your Distributed Cloud hardware before delivery. ## Order Distributed Cloud connected hardware using the GDC Hardware Management API > [!WARNING] > > **Preview** > > > This feature is > > subject to the "Pre-GA Offerings Terms" in the General Service Terms section of the > [Service Specific > Terms](https://docs.cloud.google.com/terms/service-terms#1). > > Pre-GA features are available "as is" and might have limited support. > > For more information, see the > [launch stage descriptions](https://cloud.google.com/products/#product-launch-stages). The GDC Hardware Management API lets you to programmatically place an order for Distributed Cloud hardware. An order constitutes your intent to deploy Distributed Cloud connected. An order must include the following information, which is used throughout the lifetime of your Distributed Cloud connected deployment: - Point of contact for order management and delivery - Delivery site address and any information relevant to delivery - Hardware configuration - Network configuration You must work with your Google sales representative to complete the Customer Information Questionnaire (CIQ) and finalize the scope and configuration of your Distributed Cloud connected deployment. ### Structure of an order To place an order using the GDC Hardware Management API, you must create an `Order` resource, plus the accompanying `Site`, `Zone`, and `Hardware` resources that the `Order` resources references. You then submit the `Order` resource to Google. These resources support standard CRUD operations. The name of each resource is a path that includes the target Google Cloud project ID and Google Cloud region. These resources have the following functions. For more information on using the GDC Hardware Management API, see the [Google Distributed Cloud CLI and API reference](https://docs.cloud.google.com/distributed-cloud/connected/1.7.1/docs/apis). - **`Order`** . This resource requests the creation of one or more Distributed Cloud zones. When you create this resource, it receives a name accessible in the `create_order_response.name` field. The `Order` resource name has the following format: ```python `projects/`PROJECT_ID`/locations/`REGION`/orders/`ORDER_ID ``` where: - `PROJECT_ID`: the ID of the target Google Cloud project. - `REGION`: the Google Cloud region in which you want to deploy your Distributed Cloud zones. - `ORDER_ID`: a unique ID that identifies this order. If omitted, a value is automatically generated. We recommend that you provide a unique order ID value consisting of [lowercase letters, numbers, and dashes](https://google.aip.dev/122#resource-id-segments). Otherwise, failed order creation calls can generate duplicate orders. - **`Site`**. This resource represents the physical location where you want to deploy your Distributed Cloud hardware. This resource includes the contact information of a responsible party who coordinates access for initial delivery and future maintenance. This contact might be different from the one you provided on the order. - **`Hardware`** . This resource instantiates a Distributed Cloud connected SKU and represents a Distributed Cloud server or rack. Each `Hardware` resource references the associated `Order`,`Site`, and `Zone` resources. To see the available SKUs, use the [ListSkus](https://docs.cloud.google.com/distributed-cloud/connected/1.7.1/docs/reference/hardware/rpc/google.cloud.gdchardwaremanagement.v1alpha#google.cloud.gdchardwaremanagement.v1alpha.GDCHardwareManagement.ListSkus) API call. - **`Zone`**. This resource specifies the network configuration of your Distributed Cloud connected machines and associated clusters. A Distributed Cloud zone covers one or more Distributed Cloud connected racks or all of the Distributed Cloud connected server machines deployed at your location. When you submit an `Order` resource to Google and its status changes from `DRAFT` to `SUBMITTED`, most of the field values become read-only. ### Lifecycle of an order An `Order` resource can have one of the states listed in [`State`](https://docs.cloud.google.com/distributed-cloud/connected/1.7.1/docs/reference/hardware/rpc/google.cloud.gdchardwaremanagement.v1alpha#google.cloud.gdchardwaremanagement.v1alpha.Order.State). Involved parties can leave comments on the order, which are stored as `Comment` resources nested under the corresponding `Order` resource. You can read and submit comments through both the GDC Hardware Management API and the Google Cloud console. If the order contains all of the required information and you have signed a contract with Google, the order proceeds through the following state succession: `ACCEPTED,` `BUILDING,` `SHIPPING`, `INSTALLING` and `COMPLETED.` The states of the associated `Zone` and `Hardware` resources are updated in lockstep with the `Order` resource. If we need more information from you or you have not signed a contract with Google, the order enters the `ADDITIONAL_INFO_NEEDED` state and awaits resolution through comments. Order modification or cancellation must be requested through comments. ### Select the target Google Cloud project A Google Cloud project is a construct that encapsulates a set of Google Cloud resources, makes them available for you to use, and establishes rules for access control and billing for those resources. We recommend that you create a separate Google Cloud project per administrative domain, such as a country or corporate department, and high-level use case, such as edge versus core, and manage your Distributed Cloud connected deployment for the domain through that Google Cloud project. The Google Cloud project lets you perform the following management tasks: - Order Distributed Cloud connected hardware. - Configure Distributed Cloud connected clusters and register them in a fleet. - Manage software rollouts. - Manage Distributed Cloud connected data in Cloud Storage. - Manage Distributed Cloud connected credentials in Secret Manager. - Manage Distributed Cloud connected logs and metrics in Cloud Monitoring. Your exact Google Cloud project topology depends on your business requirements. We recommend that you avoid cross-project dependencies and always create and use resources inside each Google Cloud project. Hardware ordered within a specific Google Cloud project is always managed in that Google Cloud project. ### Select the target Google Cloud region The specific choice of Google Cloud regions for your Distributed Cloud connected deployment depends on your business requirements and legal ramifications of your target geographical locations. If you're integrating your Distributed Cloud connected deployment into an existing multi-region Google Cloud footprint, we recommend that you map each Distributed Cloud connected zone to the Google Cloud region hosting that zone's dependencies. If you're not integrating Distributed Cloud connected deployment with an existing Google Cloud footprint, we recommend that you diversify your Google Cloud region selection for increased reliability. For example: - Map each Distributed Cloud connected zone to its nearest supported Google Cloud region. This limits the impact of a management plane fault to a single geographic region. - Stripe your Distributed Cloud connected across several Google Cloud regions. This limits the number of Distributed Cloud connected zones that can be affected by a management plane fault; however, the impacted zones are spread over a larger geographical region. Distributed Cloud connected supports the following Google Cloud regions: - **Asia** : `asia-east1`, `asia-east2`, `asia-northeast1`, `asia-northeast3`, `asia-south1`, `asia-south2`, `asia-southeast1`, `asia-southeast2` - **Europe** : `europe-central2`, `europe-north1`, `europe-west1`, `europe-west2`, `europe-west3`, `europe-west4`, `europe-west6`, `europe-west8`, `europe-west9` - **Middle East** : `me-central1`, `me-west1` - **Oceania** : `australia-southeast1` - **North America** : `northamerica-northeast1`, `northamerica-northeast2`, `us-central1`, `us-central2`, `us-east1`, `us-east4`, `us-east5`, `us-east7`, `us-south1`, `us-west1`, `us-west2`, `us-west3`, `us-west4`, `us-west8` - **South America** : `southamerica-east1`, `southamerica-west1` ### Set up your environment Before you begin, complete the following prerequisites: 1. [Set up a Python development environment](https://docs.cloud.google.com/python/docs/setup). 2. Install the GDC Hardware Management API client library using the following command: ``` python3 -m pip install google-cloud-gdchardwaremanagement ``` 3. Enable the [GDC Hardware Management API](https://console.cloud.google.com/apis/api/gdchardwaremanagement.googleapis.com) on the target Google Cloud project. ### Create and submit a Distributed Cloud connected hardware order using the GDC Hardware Management API The steps in this section are examples that illustrate how to create and submit an an `Order` resource to Google using the GDC Hardware Management API. To complete the steps in this section, you must have the [GDC Hardware Management Admin](https://docs.cloud.google.com/iam/docs/roles-permissions/gdchardwaremanagement#gdchardwaremanagement.admin) (`roles/gdchardwaremanagement.admin`) role in your Google Cloud project. 1. Create an `Order` resource. For example: ```python import datetime from google.cloud import gdchardwaremanagement_v1alpha from google.protobuf.timestamp_pb2 import Timestamp from google.type import postal_address_pb2 client = gdchardwaremanagement_v1alpha.GDCHardwareManagementClient() contact = gdchardwaremanagement_v1alpha.Contact( given_name="John", family_name="Customer", email="jcustomer@example.com", phone="+1 123 456 7890", ) organization_contact = gdchardwaremanagement_v1alpha.OrganizationContact( address=postal_address_pb2.PostalAddress( organization="Example Organization", address_lines=["1800 Amphibious Blvd."], locality="Mountain View", administrative_area="CA", postal_code="94045", region_code="US", ), contacts=[contact], ) order = gdchardwaremanagement_v1alpha.Order( organization_contact=organization_contact, customer_motivation="I like Google Distributed Cloud!", fulfillment_time=Timestamp( seconds=int(datetime.datetime(2024, 11, 22, 9, 0).timestamp()), ), region_code="US", ) create_order_response = client.create_order( request=gdchardwaremanagement_v1alpha.CreateOrderRequest( parent="projects/myProject/locations/us-east1", order_id="myOrderID", order=order, ), ).result() ``` Your order is now in `DRAFT` state and has been assigned a resource name stored in the `create_order_response.name` field. Use this resource name when modifying or tracking the status of this order. 2. Create a `Site` resource. For example: ```python site = gdchardwaremanagement_v1alpha.Site( organization_contact=organization_contact, google_maps_pin_uri="https://maps.app.goo.gl/z7bE8z8fffg6Sri46", ) create_site_response = client.create_site( request=gdchardwaremanagement_v1alpha.CreateSiteRequest( parent="projects/myProject/locations/us-east1", site_id="mySite", site=site, ), ).result() ``` 3. Create a `Zone` resource. For example: ```python zone = gdchardwaremanagement_v1alpha.Zone( contacts=[contact], network_config=gdchardwaremanagement_v1alpha.ZoneNetworkConfig( management_ipv4_subnet=gdchardwaremanagement_v1alpha.Subnet( address_range="192.0.2.0/24", default_gateway_ip_address="192.0.2.1", ), machine_mgmt_ipv4_range="192.0.2.8/29", kubernetes_ipv4_subnet=gdchardwaremanagement_v1alpha.Subnet( address_range="203.0.113.0/24", default_gateway_ip_address="203.0.113.1", ), kubernetes_node_ipv4_range="203.0.113.8/29", kubernetes_control_plane_ipv4_range="203.0.113.16/29", ), ) create_zone_response = client.create_zone( request=gdchardwaremanagement_v1alpha.CreateZoneRequest( parent="projects/myProject/locations/us-east1", zone_id="myZone", zone=zone, ), ).result() ``` 4. Create the `Hardware` resources. You must specify a unique `hardware_id` value for each machine in your Distributed Cloud connected deployment. For example: ```python from google.type import date_pb2 hardware = gdchardwaremanagement_v1alpha.Hardware( order=create_order_response.name, site=create_site_response.name, zone=create_zone_response.name, config=gdchardwaremanagement_v1alpha.HardwareConfig( sku="projects/myProject/locations/us-east1/skus/gdce-server-l", power_supply=gdchardwaremanagement_v1alpha.types.PowerSupply.POWER_SUPPLY_AC, ), physical_info=gdchardwaremanagement_v1alpha.HardwarePhysicalInfo( power_receptacle=gdchardwaremanagement_v1alpha.types.HardwarePhysicalInfo.PowerReceptacleType.NEMA_5_15, network_uplink=gdchardwaremanagement_v1alpha.types.HardwarePhysicalInfo.NetworkUplinkType.RJ_45, voltage=gdchardwaremanagement_v1alpha.types.HardwarePhysicalInfo.Voltage.VOLTAGE_110, amperes=gdchardwaremanagement_v1alpha.types.HardwarePhysicalInfo.Amperes.AMPERES_15, ), installation_info=gdchardwaremanagement_v1alpha.HardwareInstallationInfo( rack_location="Floor 2, Room 201, Row 7, Rack 3", power_distance_meters=2, switch_distance_meters=2, rack_unit_dimensions=gdchardwaremanagement_v1alpha.Dimensions( width_inches=19, height_inches=1.75, depth_inches=30, ), rack_space=gdchardwaremanagement_v1alpha.RackSpace( start_rack_unit=12, end_rack_unit=12, ), rack_type=gdchardwaremanagement_v1alpha.types.HardwareInstallationInfo.RackType.FOUR_POST, ), requested_installation_date=date_pb2.Date(year=2024, month=11, day=22), ) create_hardware_response = client.create_hardware( request=gdchardwaremanagement_v1alpha.CreateHardwareRequest( parent="projects/myProject/locations/us-east1", hardware_id="machineHardwareID", hardware=hardware, ), ).result() ``` 5. Submit the `Order` resource to Google: ```python submit_order_response = client.submit_order( request=gdchardwaremanagement_v1alpha.SubmitOrderRequest( name=create_order_response.name, ), ).result() ``` ### Troubleshooting This section describes the most commonly encountered errors, their causes, and available remedies. #### Error: `400 FAILED_PRECONDITION` If you receive a `400` error code with a `FAILED_PRECONDITION` status in response to your API call, check that your request is valid for the operation you are attempting to complete. Examples of invalid requests include submitting an `Order` resource with missing fields or values, or attempting to delete a `Hardware` resource associated with a previously submitted `Order` resource. #### Error: `400 INVALID_ARGUMENT` If you receive a `400` error code with an `INVALID_ARGUMENT` status in response to your API call, check for incorrect field names and values that don't match their expected types, or missing values. You might also receive this error if you use an `updateMask` in a `PATCH` request and one or more fields specified in the `updateMask` is invalid. To remedy this issue, see [GDC Hardware Management API](https://docs.cloud.google.com/distributed-cloud/connected/1.7.1/docs/reference/hardware/rest) to verify that all field names and values are correct, including formatting. If using a JSON payload, confirm that all required information is included in the payload. #### Error: `401 UNAUTHENTICATED` If you receive a `401` error code with an `UNAUTHENTICATED` status in response to your API call, check your authentication configuration. For more information, see [Set up Application Default Credentials](https://docs.cloud.google.com/docs/authentication/provide-credentials-adc). #### Error: `403 PERMISSION_DENIED` If you receive a `403` error code with a `PERMISSION_DENIED` status in response to your API call, check whether the service account used to make the API call has sufficient privileges to access the target objects and resources. Also verify that the credentials are correct and not expired. #### Error: `404 NOT_FOUND` If you receive a `404` error code with a `NOT_FOUND` status in response to your API call, check that the resource names and path specified in your API call are valid. See [GDC Hardware Management API](https://docs.cloud.google.com/distributed-cloud/connected/1.7.1/docs/reference/hardware/rest) to verify that your request URL is structured correctly and that all fields included in the URL are valid. ## What's next - [Deploy workloads on Google Distributed Cloud connected](https://docs.cloud.google.com/distributed-cloud/connected/1.7.1/docs/deploy)