Google Distributed Cloud clusters can run with one of three load
balancing modes: integrated, bundled, or manual. With integrated mode, a
Google Distributed Cloud cluster uses the F5 BIG-IP load balancer.
With bundled mode, Google Distributed Cloud provides and manages the
load balancer. You do not have to get a license for a load balancer, and the
amount of setup that you have to do is minimal.
With manual mode, Google Distributed Cloud uses a different load balancer of your choice.
Manual load balancing mode requires that you do more configuration than with
integrated mode.

If you choose to use the F5 BIG-IP load balancer, you need to have a
[user role](https://techdocs.f5.com/kb/en-us/products/big-ip_ltm/manuals/product/bigip-user-account-administration-11-6-0/3.html)
that has sufficient permissions to set up and manage the load balancer. Either
the Administrator role or the Resource Administrator role is sufficient.

This topic describes setting aside IP addresses and `nodePort` values for later
use. The idea is that you choose the IP addresses and `nodePort` values that you
want to use for load balancing and for your cluster nodes. But you don't do
anything with the addresses and `nodePort` values at this point. Later, when you
are ready to install Google Distributed Cloud, you will need the addresses and
`nodePort` values to fill in your cluster configuration file.

## Setting aside virtual IP addresses

Regardless of which load balancing mode, you must set aside
several virtual IP addresses (VIPs) that you intend to use for load balancing.
With integrated and bundled mode, you specify these VIPs in your cluster configuration file,
and Google Distributed Cloud automatically configures the F5 BIG-IP or Seesaw load balancer
to use the VIPs. With manual mode, you must manually configure your load
balancer to use the VIPs.

For your admin cluster, you must set aside this VIP:

- VIP for Kubernetes API server

For each user cluster you intend to create, you must set aside these VIPs:

- VIP for the Kubernetes API server
- VIP for the ingress service

If you intend to use add-ons in your admin cluster, you must set aside a VIP for
the addon service in the admin cluster.

For example, suppose you intend to have two user clusters, and you intend to use
addons. Then you would need two VIPs for your admin
cluster and two VIPs for each of your user clusters. So you would need to set
aside six VIPs.

## Setting aside node IP addresses

With integrated or bundled mode, you can use an existing Dynamic Host Configuration
Protocol (DHCP) server to provide IP addresses for your cluster nodes, or you
can specify static IP addresses for nodes. With manual mode, you cannot use
DHCP. You must specify static IP addresses for your nodes.

If you choose to use static IP addresses, you must set aside enough addresses
for the nodes in the admin cluster and the nodes in all the user clusters you
intend to create. For details about how many node IP addresses to set aside, see
[Configuring static IPs](https://docs.cloud.google.com/anthos/clusters/docs/on-prem/1.6/how-to/install-static-ips#configuring_static_ips).

## Setting aside `nodePort` values

In Google Distributed Cloud clusters, the Kubernetes API server, the ingress
service, and the addon service are implemented as
[Kubernetes Services of type `NodePort`](https://docs.cloud.google.com/kubernetes-engine/docs/concepts/service#service_of_type_nodeport).
With integrated or bundled load balancing mode, Google Distributed Cloud chooses
the `nodePort` values for these Services automatically. With manual load
balancing mode, you must specify the `nodePort` values to be used for these
Services. For more information, see
[Setting aside `nodePort` values](https://docs.cloud.google.com/anthos/clusters/docs/on-prem/1.6/how-to/manual-load-balance#set_aside_nodeports).

## Configuring the load balancer

With integrated or bundled load balancing mode, Google Distributed Cloud automatically
configures the load balancer with the VIPs that you specify in the
cluster configuration file. With manual mode, you must configure your load
balancer with the VIPs you have chosen. How you configure your load balancer
depends on which load balancer you are using. For more information, see
[Enabling manual load balancing](https://docs.cloud.google.com/anthos/clusters/docs/on-prem/1.6/how-to/manual-load-balance).

## Summary of preparing for load balancing

The following table summarizes what you must do to prepare for load balancing
in integrated and manual mode:

|   | Integrated/Bundled mode | Manual mode |
|---|---|---|
| Choose VIPs before you create your clusters. | Yes | Yes |
| Choose node IP addresses before you create your clusters. | No, if using DHCP. Yes, if using static IP addresses. | Yes |
| Choose `nodePort` values before you create your clusters. | No | Yes |
| Manually configure your load balancer | No | Yes |

## Creating Services in your cluster

After your user cluster is running, you might want to create
[Kubernetes Services](https://docs.cloud.google.com/kubernetes-engine/docs/concepts/service)
and expose them to external clients.

Regardless of whether you are using integrated, bundled or manual load balancing mode,
you can expose Services to external clients by using
[Ingress objects](https://kubernetes.io/docs/concepts/services-networking/ingress/).

With integrated or bundled load balancing mode, you can create a Service of type
`LoadBalancer` and specify a VIP for the Service. Google Distributed Cloud
automatically configures the VIP on the load balancer.

With manual load balancing mode, you cannot expose a Service of type
`LoadBalancer` to external clients. Instead, you can use these steps
to expose a Service to external clients:

- Create a Service of type NodePort.

- Choose a VIP for your Service.

- Manually configure your load balancer so that traffic sent to the VIP
  is forwarded to your Service.

The following table summarizes the kinds of Services you can expose in
different modes:

|   | Integrated/Bundled mode | Manual mode |
|---|---|---|
| Expose Services to external clients by using Ingress objects. | Yes | Yes |
| Expose Services of type `ClusterIP` to internal clients. | Yes | Yes |
| Expose Services of type `NodePort` to external clients. | Yes | Yes |
| Expose Services of type `LoadBalancer` to external clients. | Yes | No |

## What's next

- [Bundled load balancing with Seesaw](https://docs.cloud.google.com/anthos/clusters/docs/on-prem/1.6/how-to/bundled-load-balance)
- [Enabling manual load balancing](https://docs.cloud.google.com/anthos/clusters/docs/on-prem/1.6/how-to/manual-load-balance)
- [Load balancing with Citrix](https://docs.cloud.google.com/anthos/clusters/docs/on-prem/1.6/how-to/citrix-load-balance)